This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Design of Composite Driveshafts for Automotive Applications
Technical Paper
2004-01-0485
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This work presents a comprehensive approach to design driveshafts for automotive applications. The two important aspects of driveshaft design, viz., (i) design of composite shaft tube, and (ii) design of adhesively bonded tubular joint between the yoke and the tube are discussed. Based on the closed-form analytical solutions preliminary design tools are developed to aid quick analysis and design of composite driveshaft for automotive applications. Furthermore, detailed finite element analyses are performed to validate the preliminary design tools.
Recommended Content
Technical Paper | Composite Driveshaft Designs |
Technical Paper | FEA (Finite Element Analysis) Modeling for Body-in-White Adhesives |
Journal Article | Crashworthiness and Numerical Analysis of Composite Inserts in Vehicle Structure |
Authors
Citation
Rastogi, N., "Design of Composite Driveshafts for Automotive Applications," SAE Technical Paper 2004-01-0485, 2004, https://doi.org/10.4271/2004-01-0485.Also In
References
- Leslie, J. C. et. al. “Composite Driveshafts: Technology and Experience” Proceedings of International Truck & Bus Meeting and Exposition Detroit, MI October 14-16 1996 43 52 SAE Paper No. 962209
- Dharan, C. K. H. “Design of Automotive Components with Advanced Composites” Proceedings of 2 nd ICCM Conference April 16-20 1978 1446 1461
- Ruegg, C. Habermeier, J. “Composite Propeller Shafts, Design and Optimization” Automotive Engineer July 1981 13 15
- Chase, V. A. “Automotive Applications of Composite Materials” Proceedings of 11 th SAMPE Technical Conference 11 November 13-15 1979 388 398
- Boris, J. F. Poston, I. E. “Automotive Plastics and Composites in the 1980's” Proceedings of 29 th SAMPE Symposium April 3-5 1984 677 691
- Theren, K. Lundin, A. “Advanced Composite Materials for Road Vehicles” Materials & Design 11 2 April 1990 71 75
- Hoffmann, W “Fiber Composites in the Driveline” Automotive Engineering 14 6 Dec. 1989 48 50
- Hannibal, A. J. Avila, J. A. “A Torsionally Stiff-Bending Soft Driveshaft” Proceedings of 39 th Annual SPE Conference January 16-19 1984 2F 1 9
- Spencer, B McGee, J “Design Methodology for a Composite Drive Shaft” Proceedings of Advanced Composites Conference December 2-4 1985 69 82
- Fang-Jing, X. et. al “Design and Mechanical Analysis of a Hybrid Composite Driveshaft” Composite Structures 1991 207 216
- Johnson, F. W. “Technological and Safety Developments in Truck Design” International Journal of Vehicle Design 5 1984 317 335
- Hoffman, W. “Fiber Composites in Driveline” Fiber Composites December 1989 48 50
- McDermott, J. S. “Chapter 3:Automotive and Industrial Applications” JTEC Report on Advanced Manufacturing Technology for Polymer Composite Structures in Japan April 1994 http://www.itri.loyola.edu/polymers/c3_s1.htm
- Kedward, K. T. Whitney, J. M. Delaware Composite Design Encyclopedia 5 214 219
- ABAQUS/Standard Version 5.8 Hibbitt, Karlsson and Sorensen, Inc. Pawtucket, RI
- MSC/NASTRAN Version 70.5 The MacNeal-Schwendler Corporation Los Angeles, CA
- PROE/MECHANICA Version 21 Parametric Technology Corporation Waltham, MA
- I-DEAS Master Series 8 Structural Dynamics Research Corporation Milford, OH
- GENESIS, V7.0 Vanderplaats Research and Development, Inc. Colorado Springs, CO
- Rastogi, Naveen Ghosh, Dipankar Vanderplaats, Gary “Discrete Optimization Capabilities in GENESIS Structural Analysis and Optimization Software” 9 th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization Atlanta, GA September 4-6 2002
- Leiva Juan Pablo Ghosh, Dipankar Rastogi, Naveen “A New Approach in Stacking Sequence Optimization of Composite Laminates using GENESIS Structural Analysis and Optimization Software” 9 th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization Atlanta, GA September 4-6 2002
- Rastogi, Naveen Deepak, B. P. Soni, S. R. “Stress Analysis Codes for Bonded Joints in Composite Structures,” Proc. of the AIAA/ASME/ASCE/AHS/ASC 38th Structures, Structural Dynamics and Materials Conference, Orlando, FL April 7-10 1997 2772 82
- Adams, R. D. Comyn, J. Wake, W. C. Structural Adhesive Joints in Engineering Second Chapman & Hall 1997
- Adams, R. D. Peppiat “Stress Analysis of Adhesive Bonded Tubular Lap” Journal of Adhesions 9 1977 1 18
- Hipol, P. J. “Analysis and Optimization of Tubular Lap Joints in Torsion” Journal of Composite Materials 18 1984 298 311
- Chon, C. T. “Analysis of Tubular Lap Joints in Torsion” Journal of Composite Materials 16 1982 268 284
- Graves S. R. Adams, R. D. “Analysis of a Bonded Joint in a Composite Tube Subjected to Torsion” Journal of Composite Materials 15 1981 211 223