This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Determination of Variator Robustness Under Macro Slip Conditions for a Push Belt CVT
Technical Paper
2004-01-0480
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Developments in clamping force control for the push belt Continuously Variable Transmission (CVT) aim at increased efficiency in combination with improved robustness. Current control strategies attempt to prevent macro slip between elements and pulleys at all times for maximum robustness. In order to search for the limiting factors in developing a new control strategy, situations where macro slip occurs have been investigated. New tribological insights show that macro slip is acceptable to a certain extent. An important failure mechanism proves to be the occurrence of adhesive wear in the contact leading to a loss in torque transfer. As a combination of normal load and slip speed, respectively clamping force and slip rate in a variator, a transition can be found from a safe wear region to an excessive/adhesive wear region. The occurrence of this transition has been verified with experiments on CVT variator level. New applications based on current understanding are found in the field of new control strategies.
Recommended Content
Authors
Citation
van Drogen, M. and van der Laan, M., "Determination of Variator Robustness Under Macro Slip Conditions for a Push Belt CVT," SAE Technical Paper 2004-01-0480, 2004, https://doi.org/10.4271/2004-01-0480.Also In
SAE 2004 Transactions Journal of Passenger Cars: Mechanical Systems
Number: V113-6; Published: 2005-07-05
Number: V113-6; Published: 2005-07-05
References
- Brandsma, A. van Lith, J. Hendriks, E. “Push belt CVT developments for high power applications” Proc. of CVT99 Eindhoven University of Technology 1999 142 147
- Van der Sluis, F. Brandsma, A. van Lith, J. van der Meer, K. van der Velde, A. Pennings, B. “Stress reduction in push belt rings using residual stresses” Proc. of CVT2002 Congress VDI-Berichte 1709 Munich October 2002 383 402
- Van Spijk, G. Veenhuizen, B. “An upshift in CVT-efficiency” Proc. of Getriebe in Fahrzeugen '98 VDI-Berichte 1393 Friedrichshafen June 1998 659 671
- Van der Sluis, F. et al. The two-stage push belt CVT IIR symposium Offenbach Germany 2002
- Van der Sluis, F “A New Pump for CVT Applications” SAE 2003-01-3207 , Proc. of the 2003 Powertrain & Fluid Systems Conference Pittsburgh October 2003
- Van der Laan, M. Luh, J. “Model-Based Variator Control Applied to a Belt Type CVT” Proc. of CVT99 Eindhoven University of Technology 1999 105 116
- Pennings, B. van Drogen, M. Brandsma, A. van Ginkel, E. Lemmens, M. “Van Doorne CVT Fluid Test - A Test Method on Belt-Pulley Level to Select Fluids for Push Belt CVT Application” SAE 2003-01-3253 , Proc. of the 2003 Powertrain & Fluid Systems Conference Pittsburgh October 2003
- Kobayashi, D. Mabuchi, Y. Katoh, Y. “A Study on the Torque Capacity of a Metal Pushing V-belt for CVTs” SAE Paper 980822 1998
- DIN 50320: Verschleiß - Begriffe, Systemanalyse von Verschleißvorgängen, Gliederung des Versleißgebietes Beuth Verlag Berlin 1979
- Schipper, D.J. “Transition in the Lubrication of Concentrated Contacts” University of Twente 1988
- Schipper, D.J. Gee, A.W.J. de “Lubrication Modes and the IRG Transition Diagram” Lubrication Science 8 1 1995 27 35
- Bhushan, B. “Principles and Applications of Tribology” Wiley New York 1999
- Landheer, D. Gee, A.W.J. de “Tribologie - deel A: Inleiding dynamische contactverschijnselen” Lecture notes University of Twente The Netherlands 1994
- Czichos, H. “Presentation of Friction and Wear Data” ASM Handbook 18 1992 489 492
- Begelinger, A. Gee, A.W.J. de “Failure of Thin Film Lubrication - The Effect of Running-In on the Load Carrying Capacity of Thin Film Lubricated Concentrated Contacts” Journal of Lubrication Technology 103 1981 203 210
- Gee, A.W.J. de Begelinger, A. “Failure mechanisms in sliding lubricated concentrated contacts” Proceedings of the 11 th Leeds-Lyon Symposium on Mixed Lubrication and Lubricated Wear 1984
- Schipper, D.J. Steenmeijer, R.C. Gee, A.W.J. de “The Effects of Variations in the Procedure of Loading on the Load Carrying Capacity of Thin Film Lubricated Concentrated Contacts” Proceedings of the 4 th International Tribology Conference, Austrib94 I 1994 105 112 0 646 21097
- DIN 50321: Verschleißmeßgrößen Beuth Verlag Berlin 1979