This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of Vehicle A-Pillar Aerodynamics using various Turbulence Models
Technical Paper
2004-01-0231
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Vortices formed around the A-pillar region dictates the pressure distribution on the side panels of a passenger vehicle and also can lead to aerodynamic noise generation. This paper compares the suitability of various turbulence models in simulating the flow behind a vehicle A-pillar region under laboratory operating conditions. Commercial software's (FLUENT and SWIFT) were used to compare the performance of various turbulence models. In FLUENT, a simplified vehicle model with slanted A-pillar geometry was generated using GAMBIT and in SWIFT, the simplified vehicle model was generated using Fame Hybrid. Computational Fluid Dynamics (CFD) simulations were carried out using FLUENT under steady state conditions using various turbulence models (k-, k- Realize, k- RNG, k- and Spalart Allamaras). In SWIFT, k-, A-RSM and HTM2 turbulence models were used for the steady state simulations. Investigations were carried out at velocities of 60, 100 and 140km/h and at 0-degree yaw angle. Results of Cp values were compared against available experimental data. Qualitative flow visualization analyses based on the CFD results were also carried out to better understand the airflow behavior behind the A-pillar region. Results obtained using CFD modelling provided reasonable agreement against available experimental data. Recommendations are made for future work.
Recommended Content
Authors
Citation
Murad, N., Naser, J., Alam, F., and Watkins, S., "Simulation of Vehicle A-Pillar Aerodynamics using various Turbulence Models," SAE Technical Paper 2004-01-0231, 2004, https://doi.org/10.4271/2004-01-0231.Also In
References
- Alam, F. 2000 The Effects of Car A-Pillar and Windshield Geometry and Yaw Angles on Local Flow and Noise: PhD Thesis RMIT University Australia
- Alam, F Watkins, S Song, B Steiner, T Humphris, C. 1998 ‘The Flow Around a Car A-pillar’ The 13 th Australasian Fluid Mechanics Conference Melbourne, Australia 461 464
- AVL 2002 AVL User Guide - Version 3.1 Austria
- Bearman, P.W De Beer, D Harvey, J.K. 1989 ‘Experimental Studies of Road Vehicle Flow Fields’ AIAA , Paper 89-1887 1 9
- Dobrzynski, W Soja, H. 1994 ‘Effect on Passenger Car Wind Noise Sources of Different A-Post Configurations’ Inter-Noise-94 Yokohama, Japan 387 390
- Farabee, T.M. 1986 An Experimental Investigation of Wall Pressure Fluctuations Beneath Non-Equilibrium Turbulent Flows: PhD Dissertation The Catholic University of America David W. Taylor Naval Ship research and Development Centre USA
- Fluent Incorporated 1998 Fluent User's Guide - Version 6.0 USA
- Fricke, F.R. 1971 ‘Pressure Fluctuations in Separated Flows’ Journal of Sound and Vibration 17 1 113 123
- George, A.R. 1990 ‘Automobile Aerodynamic Noise’ SAE Paper , No 900315
- George, A.R Callister, J.R. 1996 ‘Aeroacoustics of Passenger Cars- State- of- the- Art’ Seminar on Aerodynamics and Powertrain Automobile Noise Industrie Pininfarina, Aerodynamic and Aeroacoustic Research Centre Grugliasco, Italy
- Hamel, T.A Ahuja, K.K. 1996 ‘Wind-Noise Measurements On An Automobile Side Glass With A-Pillars of Different Height’ AIAA
- Haruna, S Nouzawa, T Kamimoto, I Sato, H. 1990 ‘An Experimental Analysis and Estimation of Aerodynamic Noise Using a Production Vehicle’ SAE Paper , No 900316
- Hucho, W.H 1998 Aerodynamics of Road Vehicles 2nd Butterworths London
- Hussain, A.K.M.F. 1986 ‘Coherent Structure-Reality and Myth’ Physics of Fluids 26 2816 2850
- Hussain, A.K.M.F. 1986 ‘Coherent Structure and Turbulence’ Journal of Fluid Mechanics 173 303 356
- Kumarasamy, S Karbon, K. 1999 ‘Aero acoustics of an Automobile A-Pillar Rain Gutter: Computational and Experimental Study’ SAE Paper , 1999-01-1128
- Laufer, J. 1974 ‘On the Mechanism of Noise Generation by Turbulence’ Univ. South Calif Aerospace Engineering 125
- Makowski, F.T Kim, S.E. 2000 ‘Advances in External-Aero Simulation of Ground Vehicles Using the Steady RANS Equations’ SAE Paper , 2000-01-0484
- Mohsen, A.M. 1968 ‘Experimental Investigation of the Wall Pressure Fluctuations in Subsonic, Separated Flows’ Boeing Company Report
- Murad, N.M Naser, J Alam, F Watkins, S. 2002 ‘CFD Modelling of Vehicle A-Pillar Aerodynamics’ Computational Fluid Dynamics 2002, Proceedings of the Second International Conference on Computational Fluid Dynamics, ICCFD Sydney Australia 809 810
- Nienaltowska, E. 1993 ‘Separated Flow on the Car Body: Spectral and Spatial Characteristics Analysed from the Aeroacoustic Viewpoint’ International Journal of Vehicle Design 14 5 6
- Popat, B.C. 1991 Study of Flow and Noise Generation From Car A-Pillars: PhD Thesis University of London
- Sadakata, O. 1988 ‘A Consideration of Wind Noise Reduction by Air Flow Control’ 22 nd FISITA 182 189
- Simpson, R.L Ghodbane, M McGrath, B.E. 1987 ‘Surface Pressure Fluctuations in a Separating Turbulent Boundary Layer’ Journal of Fluid Mechanics 177 167 186
- Simpson, R.L. 1989 ‘Turbulent Boundary-Layer Separation’ Annual Review of Fluid Mechanics 21 205 234
- Stapleford, W.R Carr, G.W. 1970 ‘Aerodynamic Noise on Road Vehicle, Part 1, The Relationship Between Aerodynamic Noise and the Nature of Airflow’ The Motor Industry Research Association, Report
- Uchida, K Okumura, K Kuriyama, T. 1997 ‘Aerodynamic simulations by using discontinuous interface grid and solution adaptive grid method’ SAE Paper , 970141
- Watanabe, M Harita, M Hayashi, E. 1978 ‘The Effect of Body Shapes on Wind Noise’ SAE Paper , 780268
- Watkins, S. 1999 ‘Gusts and Transients’ Topics In Wind Noise and its Measurement Part 2-SP1457 SAE USA
- Zhu, M Hanaoka, Y Miyata, H. 1994 ‘Numerical Study on the Mechanism of Wind Noise Generation About a Car-Like Body’ ASME Transaction 116