This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Evolution of Deformation-Induced Surface Morphologies Generated in Fe-Based Sheet
Technical Paper
2004-01-0166
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The complex strain states that exist within a real metal stamping are likely to generate different surface morphologies when compared to the same level of plastic strain produced via single pass deformation. This study quantifies the surface morphology that develops when an as-received traditional plain carbon steel sheet is deformed under two different single-pass, in-plane stretching operations. Roughness measurements performed in the as-received condition with a high resolution scanning laser confocal microscope revealed that an initial surface roughness did not appear to influence the deformation generated with biaxial strain. However, the initial surface roughness could have affected the deformation generated with uniaxial strain. The roughness data were fitted to a probability density function (PDF) and resulted in a near-ideal Gaussian distribution of the surface profile heights. This analysis revealed that the shape of the PDF curve changes monotonically with surface roughness and plastic strain and that the accuracy of the rms roughness (Rq) parameter strongly depends on the quality of the Gaussian fit.
Recommended Content
Authors
Citation
Stoudt, M., Hubbard, J., and Banovic, S., "Evolution of Deformation-Induced Surface Morphologies Generated in Fe-Based Sheet," SAE Technical Paper 2004-01-0166, 2004, https://doi.org/10.4271/2004-01-0166.Also In
Innovations in Steel Sheet and Bar Products and Processing, and Modelling and Testing of Steel Structures
Number: SP-1837; Published: 2004-03-08
Number: SP-1837; Published: 2004-03-08
References
- Dieter G.E. Mechanical Metallurgy 3 New York, NY McGraw-Hill 1986
- Becker R. Acta Mater . 1998 46 4 1385 1401
- Wilson W.R.D. Lee W. J. Manu. Sci. & Engr. 2001 123 279 283
- Dai Y.Z. Chiang F.P. J. Eng. Mat. Tech. 1992 114 Oct 432 438
- Valkonen A.E. “Plastic Deformation and Roughness of Free Metal Surfaces,” Ohio State University 1987
- Abe T. Nagaki S. Akase T. Bull. JSME 1985 28 236 251 258
- Kienzle O. Mieztner K. Stahl u. Eisen 1961 81 14 950 952
- Osakada K. Oyane M. Bull. JSME 1971 14 68 171 177
- Guangnan C. Huan S. Shiguang H. Baudelet B. Mater. Sci. Engr. 1990 A128 33 38
- Bishop J.F.W. Hill R. Phil. Mag. 1951 42 327 414 427
- Kocks U.F. Metall. Trans. 1970 1 1121 1143
- Hansen N. Metall. Mater. Trans. A 1985 16A 2167 2190
- Thomas T.R. Rough Surfaces 2nd London Imperial College Press 1999
- Radhakrishnan V. Wear 1970 16 325 335
- Stoudt M.R. Ricker R.E. Metall. Mater. Trans. A 2002 33A 2883 2889
- Shi M.F. “Personal communication with the author,” US Steel Group 2003
- Properties and Selection of Metals 1 8th Metals Park, OH ASM International 1961
- Smith W.F. Structure and Properties of Engineering Alloys New York McGraw-Hill Book Company 1981
- VanderVoort, G.F. Metallography Principles and Practice Materials Park, OH ASM International 1999
- Marciniak Z. Kuczynski K. Int. J. Mech. Sci 1967 9 609 620
- Foecke T.J. Banovic S.W. Fields R.J. J.O.M. 2001 53 2 27 30
- Banovic S.W. Foecke T. Metall. Mater. Trans. A 2003 34A 3 657 671
- Udupa G. Singaperumal M. Sirohi R.S. Kothiyal M.P. Meas. Sci. Technol. 2000 11 3 305 314
- Lange D.A. Jennings H.M. Shah S.P. J. Mater. Sci 1993 28 14 3879 3884
- 2002 Annual Book of ASTM Standards, Section 3, Metals Test Methods and Analytical Procedures 3.01 Metals-Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Philadelphia ASTM 2002 547 553
- Metallography and Microstructures 9 9th Metals Park, OH ASM International 1987
- 2000 Annual Book of ASTM Standards, Section 3, Metals Test Methods and Analytical Procedures 3.01 Metals-Mechanical Testing; Elevated and Low-Temperature Tests; Metallography Philadelphia ASTM 2000 240 263
- Taylor B.N. Kuyatt C.E. “Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results,” NIST Technical Note 1297 1994 NIST 1994
- Whitehouse D.J. Archard J.F. Proc. R. Soc. (London) 1970 A316 97 121
- Walpole R.E. Myers R.H. Probability and Statistics for Engineers and Scientists NY The Macmillian Co. 1972
- Mendenhall W. Sincich T. Statistics for Engineering and the Sciences 3rd San Francisco Dellen Publishing Co. 1992