This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Techniques for Diagnosis in Aerospace and Automotive Systems
ISSN: 0148-7191, e-ISSN: 2688-3627
Published November 18, 2003 by SAE International in United States
Annotation ability available
This paper presents some techniques for fault diagnosis in aerospace and automotive systems. A diagnosis technique is an algorithm to detect and isolate fault components in a dynamic process, such as sensor biases, actuator malfunctions, leaks and equipment deterioration. Fault diagnosis is the first step to achieve fault tolerance, but the redundancy has to be included in the system. This redundancy can be either by hardware or software. In situations in which it is not possible to use hardware redundancy only the analytical redundancy approach can be used to design fault diagnosis systems. Methods based on analytical redundancy need no extra hardware, since they are based on mathematical models of the system.
Citationde Jesus Teixeira, A., de Oliveira e Souza, M., and Oliva, Á., "Techniques for Diagnosis in Aerospace and Automotive Systems," SAE Technical Paper 2003-01-3630, 2003, https://doi.org/10.4271/2003-01-3630.
- — Patton, R.; Frank, P. and Clark, R., “Fault Diagnosis in Dynamics Systems: Theory and Applications”. Prentice Hall Int. Series in Systems and Control Engineering, Englewood Cliffs, NJ, 1989.
- — Gertler, Janos J., “Survey of Model-Based Failure Detection and Isolation in Complex Plants”. IEEE Control Systems Magazine, Vol. 8, no 6, pp. 3–11, December 1988.
- — Chow, E. Y. and Willsky, A. S., “Analytical Redundancy and the Design of Robust Failure Detection Systems”. IEEE Trans. Automatic Control, Vol. AC-29, no 7, pp. 603–614, July 1984.
- — Frisk, Erik, “Model-based Fault Diagnosis Applied to a SI-Engine”. site www.vehicular.isy.liu.if, Linköping University, Linköping, Sweden, 1996.
- — Patton R. J., “Robust Model-Based Fault Diagnostic State of the Art”. In IFAC Fault Detection, Supervision and Safety for Technical Processes, pp. 1–24, Espoo, Finland, 1994.
- — Hsu, P. L., Lin K. L. and Shen, L. C., “Diagnosis of Multiple Sensor and Actuator Failures in Automotive Engines”. IEEE transactions on vehicular technology, 44(4): 779–789, November 1995.
- — Oliva, Álvaro P., “Sensor Fault Detection and Analytical Redundancy Satellite Launcher Flight Control System”. SBA Controle & Automação, Vol. 9, no. 3, pp. 156–164, 1998.
- — Willsky, The. S., “The Survey of Design Methods for Failure Detection in Dynamics Systems”. Automatica, Vol. 12, no 6, pp. 601–611, November 1976.
- — McLean, D., “Automatic Flight Control Systems”. Englewood Cliffs. NJ, Prentice Hall Inc, 1990.
- — Rynaski, E. G., “Flight Control Synthesis Using Robust Output Observers”. Proc. AIAA Guidance and Control Conference, San Diego, CA, August, pp. 825–831, 1982.
- — Chen, C. T., “Introduction to Linear Systems Theory”. Holt, Rinehart and Winston Co., New York, 1984.
- — Doyle, J. C. and Stein, G., “Robustness with Observers”, IEEE Trans. on Automatic Control, Vol. AC-24, no 4, pp. 607–611, August 1979.
- — Mello, A. F. e Souza M. L. O., “A Modified Detection Filter for Sensor Faults”. AAS/AIAA Space Flight Mechanics Meeting, Huntsville, Al., USA, 10–12, Paper AAS97-196, February 1997.
- — Leite Filho, W. C., “Estrutura do Sistema de Controle do VLS”. Controle & Instrumentação, Ano7, no 72, pp. 71–77, Agosto 2002.