This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Lubricity of Liquefied Gas - Assessment of the Various Pressure and Temperature High-Frequency Reciprocating Rig (VPT-HFRR) - LPG Blended Fuel for Diesel Engine
Technical Paper
2003-01-3092
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this research, a test apparatus (VPT-HFRR) for evaluating lubricity was manufactured at an arbitrary pressure according to the lubricity test method (HFRR) for diesel fuel. The lubricity of LPG blended fuel (LBF) for diesel engines was examined using VPT-HFRR., This was a value close to that of diesel fuel, and when a suitable lubricity had been maintained, it was checked. Prototype trucks were manufactured and their durability was examined. After a run of 70,000km or more, no serious trouble had occurred, and when LBF was maintained at a suitable lubricity, it was checked.
Recommended Content
Authors
Citation
Sugiyama, K., Mori, M., Kajiwara, M., Fukumoto, M. et al., "Lubricity of Liquefied Gas - Assessment of the Various Pressure and Temperature High-Frequency Reciprocating Rig (VPT-HFRR) - LPG Blended Fuel for Diesel Engine," SAE Technical Paper 2003-01-3092, 2003, https://doi.org/10.4271/2003-01-3092.Also In
References
- Kinoshita K. Oguma M. Goto S. Sugiyama K. Kajiwara M. Mori M. Watanabe T. “Development of Retrofit DME Diesel Engine Operating with Rotary Distributor Fuel Injection Pump” SAE Paper, 2003-01-0758
- Oguma M. Goto S. Konno M. Sugiyama K. Mori M. “Experimental Study of Direct Injection Diesel Engine Fueled with Two Type of Gas To Liquid (GTL)” SAE Paper, 2002-01-2691
- Oguma M. Gisoo H. Goto S. Konno M. Kajitani S. “Atomization Characteristics for Various Ambient Pressure of Dimethyl Ether (DME)” SAE Paper 2002-01-1711
- Oguma M. Goto S. Oyama K. Sugiyama K. Mori M. “The Possibility of Gas To Liquid (GTL) as a Fuel of Direct Injection Diesel Engine” SAE Paper, 2002-01-1706
- Oguma M. Konno M. Kajitani S. Rhee Kyung T. “A Study of Low Compression-Ratio Dimethyl Ether (DME) Diesel Engine” The ASME Internal Combustion Engine Division 2000
- Oguma M. Machida H. Minegishi K. Konno K. Kajitani S. “A Study of Low Compression Ratio Dimethyl Ether (DME) Diesel Engine (in Japanese)” JSME Paper, 66-648-B 321 327 2000
- Japan LP Gas Association http://www.j-lpgas.gr.jp/util/lgv/index.html
- Japan Gas Association (JGA) http://www.gas.or.jp/default.html
- Bosch Automotive Handbook 5th Robert Bosch GmbH 2000
- Ono Y. “Conversion Technical of Low Grace Charcoal (Composition of New Clean Fuel Dimethyl Ether)” Institute of Applied Energy, Energy Synthesis Engineering 20th 1 45 54 1997
- Hashimoto K. Hirasawa T. Ohta H. Arai M. Tamura M. “Evaluation of Ignition Quality of LPG with Cetane number Improver” SAE Paper, 2002-00-0870
- INOMATA. T. GRIFFFITHS. J.F. PAPPIN A.J. “THE ROLE OF ADDITIVES AS SENSITIZERS FOR THE SPONTANEOUS IGNITION OF HYDROCARBONS” 23 rd Symposium (International) on Combustion The Combustion Institute 1990
- Sugiyama K. Kajiwara M. Iwama M. Mori M. Oguma M. Kinoshita K. Goto S. “Performance and Emissions of a DI Diesel Engine Operated with LPG and Cetane enhancing additives” SAE Paper, 2003-01-1920
- Oguma M. Goto S. Sugiyama K. Kajiwara Mori M. Konno M. Yano T. “Spray Characteristics of LPG Direct Injection Diesel Engine” SAE Paper 2003-01-0764
- Kajiwara M. Sugiyama K. Sagara M. Mori M. Goto S. Alam M. “Performance and Emissions Characteristics of an LPG Direct Injection Diesel Engines” SAE Paper, SAE Paper, 2002-01-0869
- Alam M. Goto S. Sugiyama K. Kajiwara M. Mori M. Konno M. Motohashi M. Oyama K. “Performance and Emissions of a DI Diesel Engine Operated with LPG and Ignition Improving Additives” SAE Paper, 2001-01-3680
- Lee D. Goto S. Honma H. Wakao Y. Mori M. et al Chemical Kinetic Study of a Cetane number Enhancing Additive for an LPG DI Diesel Engine SAE paper 2000-01-0193
- Goto S. Lee D. Wakao Y. Honma H. Mori M. et al Development of an LPG DI Diesel Engine using Cetane number Enhancing Additives SAE paper 1999-01-3602
- Lacey. P.I. Gunsel. S. Cruz. J.D.L. Whalen. M.V. “Effect of High Temperature and Pressure on Fuel Lubricated Wear,” SAE Paper 2001-01-3523
- Sivebaek. I.M. Sorenson. S.C. Jakobsen. J. “Dimethyl Ether (DME) - Assessment of Lubricity Using the New Volatile Fuel Viscometer (VFVM)” SAE paper 2001-01-2013
- Sorenson S.C. Mikkelsen Svend-Erik “Performance and Emissions of a 0.273 Liter Direct Injection Diesel Engine Fueled with Neat Dimethyl Ether,” SAE Paper 950064 1995
- ISO12156-1 Diesel fuel - Assessment of Lubricity using the High-Frequency Reciprocating Rig (HFRR) - Part 1:Test method
- ISO12156-2 Diesel fuel - Assessment of Lubricity using the High-Frequency Reciprocating Rig (HFRR) - Part 2:Limit
- An American national Standard ASTM International 2002
- JPI-5S-50-98 Gas oil-Testing method for lubricity (in Japanese), JPI standard Japan Petroleum Institute 1998