This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Simulation of AC Arc Faults in Aircraft Electrical Networks — Critical Loads — Critical Ignition Energies
Technical Paper
2003-01-3035
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The problem of arc tracking in cable bundles of aircraft electrical networks is known for more than 20 years now. Recently this phenomenon increasingly became a focus of the public as examinations of several aircraft accidents did not exclude the possibility of cable arc tracking as a possible reason. Conventional aircraft circuit breakers are not capable to detect this fault, either due to short current flows or too low amplitudes. Thus, for quite some time now, the industry strengthens their efforts to develop equipment in order to detect and eliminate arc faults prior to surrounding material catching fire.
A test equipment providing a better and quicker optimisation of algorithms detecting arc fault signals by means of real and synthetic load signals is described. Arc fault signals can be simulated to test AFCIs (Arc Fault Circuit Interrupters) and real arc fault tests at different frequencies may be performed.
Tests to determine the ignition energies of different cable insulation materials and thermal insulation materials have been carried out.
The electrical energy dissipated at an arc can be described by the following formula:
Where ub is the arc voltage, Rb is the arc resistance and i(t) is the arc current. The integration boundaries are determined by the time of current flow. The right side expression of the equitation is valid supposing a constant arc resistance, which is a simplifying assumption neglecting the non-linear behaviour during ignition and extinction phase. An AFCI is only able to detect the arc current directly, but cannot detect the arc voltage. Thus only the so called i2t-value, which is proportional to the energy, can be used.
If and how this value could be correlated to the energy dissipated at the location of an arc fault is described in this paper as well as the question is discussed, how this value might be used for arc fault detection.
Recommended Content
| Technical Paper | Arc Fault Circuit Interrupter Development Overview |
| Technical Paper | Electrical Arcing and Material Ignition Levels |
| Technical Paper | Arc Fault Management Using Solid State Switching |
Authors
Topic
Citation
Meckler, P., "Simulation of AC Arc Faults in Aircraft Electrical Networks — Critical Loads — Critical Ignition Energies," SAE Technical Paper 2003-01-3035, 2003, https://doi.org/10.4271/2003-01-3035.Also In
References
- Warwick, G. “Down to the Wire” Flight International 13–19 June 2000
- Beveren, T. v. Hubacher, S. “Flug SWISSAIR 111 — Die Katastrophe von Halifax und ihre Folgen” WERD Verlag Zurich 1999 128 131
- Smith, C. “Transport Aircraft Intrusive Inspection Project, An analysis of the Wire Installations of Six Decommissioned Aircraft” Final report the Intrusive Inspection Working Group December 29 2000
- Hawkins, R.E. “An Overview of the Development of a New Generation of Aerospace Wire and Cable Insulation Systems” Proc. Of 38 th International Wire & Cable Symposium Proceedings Atlanta, GA, USA 1989 644 647
- Hanson, J. “Beitrag zum Störlichtbogenverhalten von Leitungen für Raumfahrtanwendungen” Dissertation Universität Darmstadt Juni 2000
- Ramsden, J. M. “US Navy bans Kapton” Flight International 13 May 1989
- Zuercher, J. J. Tennies, C. J. “Arc Detection Using Current Variation” US Pat. No. 5 452 223 Sep. 19 1995
- Ham, H.M. Keenan, J.J. “Electric Arc and Radio Frequency Spectrum Detection” PCT Pat. No. WO 92/08143 14 May 1992
- Fischer, R. “Device for Detecting Interfering Arcs” US Pat. No. 4,791,518 Dec. 13 1988
- Milliman, J. “Navy Engineers, Industry Tackle Aircraft Wiring Risk” Naval Aviation Systems Team, Team Public Affairs, Patuxent River http://www.navair.navy.mil/news/article.cfm
- SAE AS 58091 “Thermal Circuit Breakers, Aircraft, General Specification For” 1998–08
- Meckler, P. “Simulation of AC Arc Faults in Aircraft Electrical Networks” ICEC 2002 Zuerich
- Schmitt, R. Kulhanek, A. “Final report concerning comparative wet arc tracking tests on aircraft wires with different insulation materials” Battelle Geneva Research Centres December 1986
- http://www.dupontteijinfilms.com/