This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Limited Slip Wet Clutch Transmission Fluid for AWD Differentials; Part 1: System Requirements and Evaluation Methods
Technical Paper
2003-01-1980
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Part 1 of this paper is focused on requirements and evaluation methods for transmission fluids used to lubricate wet clutches in all-wheel drive systems. Part 2: Fluid Development and Verification; presents more measurement data and shows how these results are used in the fluid development process.
The investigated all-wheel drive system, featuring a wet multi-plate clutch with a sintered brass base friction material, is described with emphasis on the demands placed on the transmission fluid.
A new test equipment to determine the frictional (μ-V) characteristics of the transmission fluid is described. The equipment can measure the actual temperature experienced by the fluid in the contact zone using an infrared temperature measurement method, as well as temperature in the oil sump and inside the clutch discs by use of thermocouples. Variable operation parameters include velocity, normal force and oil flow.
Recommended Content
Authors
Topic
Citation
Mäki, R., Ganemi, B., Olsson, R., and Lundström, B., "Limited Slip Wet Clutch Transmission Fluid for AWD Differentials; Part 1: System Requirements and Evaluation Methods," SAE Technical Paper 2003-01-1980, 2003, https://doi.org/10.4271/2003-01-1980.Also In
References
- Takasaki T. Suzuki K. Murata S. Hara T. Nishio K. ‘Development of a New 4WD System: All-Mode 4WD’ SAE paper 970684
- Naito G. Yaguchi E. Matuda T. Asahi M. Nakata T. Inokuchi I. ‘New Electronically Controlled Torque Split 4WD System for Improving Cornering Performance’ SAE paper 900556
- Sasaki H. Naitou G. Eto Y. Okuda J. Kusukawa H. Sekiguchi S. ‘Development of an electronically controlled limited slip differential system’ JSAE Review 15 1994 348 350
- Holgerson M. ‘Apparatus for measurement of engagement characteristics of a wet clutch’ Wear 213 1997 140 147
- Ganemi B. Lundström B. Olsson R. ‘Durability and Friction Characteristics of a Novel High Performance Four Wheel Drive Automotive Transmission Fluid.’ SAE Technical Papers, Doc. Nr. 2000-01-2907
- Ganemi B. Lundström B. Olsson R. ‘Friction Characteristics and System Parameters in LSC Transmission Fluids’ Proceedings for 13 th International Colloquium Tribology Esslingen 2002
- Mäki R. Ganemi B. Olsson R. ‘Wet Clutch Transmission Fluid, Development Method’ Proceedings NORDTRIB Stockholm June 2002
- Murakami Y. Kurashina H. Linden J.L. Flaherty J.E. Furumoto M. Sprys J.W. Iwamoto S. King T.E. Kagawa M. Ueda F. ‘Anti-Shudder Property of Automatic Transmission Fluids - A Study by the International Lubricants Standardization and Approval Committee (ILSAC) ATF Subcommittee’ SAE paper 2000-01-1870
- Sanders D.A. Baldwin A. ‘X-by-wire technology’ Proceedings 1 st IMechE Automobile Division Southern Centre Conference on Total Vehicle Technology’ 1-86058-324-5 2001
- Ost W. De Baets P. Degrieck J. ‘The tribological behaviour of paper friction plates for wet clutch application investigated on SAE#2 and pin-on-disk test rigs’ Wear 249 2001 361 371
- Kato Y. Akasaka R. Shibayama T. ‘Experimental Study on the Lock-up Shudder Mechanism of an Automatic Transmission’ Japanese Journal of Tribology 39 1994
- Miyazaki M. Hoshino M. ‘Evaluation of Vibration-Preventive Properties of Lubricating Oils in Wet Friction Plates and Retention of Such Properties Using a Friction Tester’ SAE Technical Papers, Doc. Nr. 881674
- Ko P.L. Taponat M-C. Pfaifer R. ‘Friction-induced vibration - with and without external disturbance’ Tribology International 34 2001
- Kaneko H. Tobita K. Sekiguchi S. Muroi A. Hirano Y. ‘Judder analysis of electronically controlled limited slip differential’ JSAE Review 17 1996
- Eguchi M. Nakahara T. ‘Friction-Velocity Characteristics of a Paper-Based Wet Friction Material in Low Sliding Velocity (Part 1): Boundary Film Model Supposing Eyring Viscosity’ Japanese Journal of Tribology 46 2001
- Ichihashi T. ‘Recent Development in Lubricating Oils for Wet Clutches and Wet Brakes’ Japanese Journal of Tribology 39 1994
- Rabinowicz E. ‘Friction and wear of materials’ John Wiley & Sons 1965
- Payvar P. ‘Laminar heat transfer in the oil groove of a wet clutch’ Int. Journal of Heat and Mass Transfer 34 1991
- Holgerson M. ‘Wet Clutch Engagement Characteristics’ Luleå University of Technology 1402-1544 1999
- Mäki R. ‘Test Apparatus for Measurement of Friction Surface Temperature of a Wet Clutch’ Proceedings for the 2 nd World Tribology Congress Vienna 2001