This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Alumina Based Substrates for Non-Thermal Plasma Research
Technical Paper
2003-01-1189
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The research effort in non-thermal plasma catalysts has created the need for a method of making flat substrates with buried conductors. The use of standard ceramic tape casting and screen-printing techniques has allowed the development of planar substrates with good dielectric properties which can handle 8kV at 600°C. Much of this work has been done on a multilayer alumina composite structure, with internal platinum electrodes, though other material sets are possible. These units can be laminated and fired into monolithic structures. The resultant structure is mechanically strong with good dielectric properties and allows the construction of very flat parallel cells, which can be stacked into multilayer substrates. The current use of platinum as a conductor for the prototypes allows the laminates to be co-fired in air at 1500-1560 °C, but a new conductor material is desired to reduce cost. The laminate may be constructed with internal metal filled vias so that single units can be assembled into stacks with buried series interconnects. The resulting stack will have imbedded electrodes and interconnects.
Recommended Content
Authors
Citation
Novak, R., "Alumina Based Substrates for Non-Thermal Plasma Research," SAE Technical Paper 2003-01-1189, 2003, https://doi.org/10.4271/2003-01-1189.Also In
References
- Hoard John Plasma-Catalysis for Diesel Exhaust Treatment: Current State of the Art SAE 2001-01-0185
- Lee Chun Song Ryu Lee Lee Chun Plasma/Catalyst System forReduction of NOx in Lean Conditions Proc of the Comb. Inst 28 2000 1227 1232
- Kim Takashima Katsura Mizuno Low Temperature NOx Reduction Process Using Combined Systems of Pulsed Corona Discharge and Catalysts Jnl Appl Phys D: Applied Physics 34 2001 604 613
- Hoard Tonkyn Balmer Panov Plasma-Catalysis for Diesel NOx Emissions: Technology Overview Second Asia-Pacific International Symposium on the Basics and Application of Plasma Technologies Kaohsiung, Taiwan ROC 18-20 April 2001
- Aardahl Habeger Rappe Tran Delgado Park Balmer Reduction of NOx by Plasma-Facilitated Catalysis: An Update on the PNNL-Caterpillar CRADA on Heavy Duty Emissions Reduction US Department of Energy Diesel Engine Emission Reductions Conference Proceedings 2001
- Penetrante, B.M. Hsiao, M.C. Merritt, B.T. Vogtlin, G.E. Wan, C.Z. Rice, G.W. Voss, K.E. Plasma-Assisted Heterogeneous Catalysis ForNO x Reduction in Lean-Burn Engine Exhaust Proceedings of the 1997 Diesel Engine Emissions Reduction Workshop
- Penetrante Brusaco Merritt Pitz Vogtlin Kung M.C. Kung H.H. Wan Voss Plasma-Assisted Catalytic Reduction of NOx SAE 982508
- Hammer Broer Plasma Enhanced Selective Catalytic Reduction of NOx for Diesel Cars SAE 982428
- Tonkyn Yoon Barlow Panov Kolwaite Balmer lean NOx reduction in two stages: nonthermal plasma followed by heterogeneous catalysis SAE 2000-01-2896 or SP-1556
- Balmer Tonkyn Barlow Kim Orlando Catalytic Plasma Reduction of NOx April 2000
- Gorce Jurado Thomas Djega-Mariadassou Khacef Cormier Pouvesle Blanchard Calvo Lendresse Non-Thermal Plasma Assisted Catalytic NOx Remediation from a Lean Model Exhaust SAE 2001-01-3508 or SP-1639
- Barlow Tonkyn Hoard Follmer Cascade Processing of NOx by Two-Step Discharge/Catalyst Reactors SAE 2001-01-3509 or SP-1639
- Tonkyn Barlow Multi-Step Discharge/Catalyst Processing of NOx in Synthetic Diesel Exhaust SAE 2001-01-3510 or SP-1639
- Park Rockwood Boyer Ragle Balmer-Millar Aardahl Habeger Rappe Tran Lean-NOx and Plasma Catalysis Over γ-alumina for Heavy Duty Applications SAE 2001-01-3569 or SP-1639
- Hoard J.W. Worsley L Follmer W.C. Electrical Characterization of a Dielectric Barrier Discharge Plasma Device SAE 1999-01-3635
- www.dupont.com/mcm/product/tape/htlm