This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Aftertreatment Catalyst Design for the New DaimlerChrysler Supercharged 4-Cylinder Engine with Direct Gasoline Injection
Technical Paper
2003-01-1161
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The launching of direct injection gasoline engines is currently one of the major challenges for the automotive industry in the European Union. Besides its potential for a notable reduction of fuel consumption, the engine with direct gasoline injection also offers increased power during stoichiometric and stratified operation. These advantages will most probably lead to a significant market potential of the direct injection concept in the near future.
In order to meet the increasingly more stringent European emission levels (EURO IV), new strategies for the exhaust gas aftertreatment are required. The most promising technique developed in recent years, especially for NOx conversion in lean exhaust gases, is the so-called NOx storage catalyst. The NOx storage technology achieves a high level of NOx conversion by storing nitrogen oxides reversibly as nitrates during lean operating conditions, while the periodic regeneration of the NOx storage components takes place under rich, i.e. under reducing conditions. In order to take full advantage of the fuel savings over the entire life-time of the vehicle, the most important task for the car and the catalyst manufacturers is the application and improvement of the thermal aging stability of this catalyst technology.
The present paper focuses on the application of a NOx storage catalyst system on a new supercharged 4-cylinder engine with direct gasoline injection and also on the progress of NOx storage catalysts' development. On the basis of model gas tests and detailed studies at the engine test bench different NOx storage catalyst generations are compared. The key criteria to evaluate the different catalyst generations are on one hand the thermal aging stability and on the other hand the NOx storage capacity as a function of temperature under dynamic engine operating. Both, the model gas tests as well as the tests at the engine bench show that the new NOx storage technology possesses a notable improved stability with respect to thermal stress and also that the NOx storage window has been extended in the higher temperature range. Due to an intelligent combination of active components the improvement of the NOx conversion was achieved without any loss in the overall behavior of the catalyst. The temperature for a complete desulfation of the new catalyst generation is in the range of 600°C which is comparable to commercial NOx storage catalysts. Under oxidizing conditions as well as during the NOx regeneration phases the hydrocarbon oxidation activity remains at a high level.
Recommended Content
Authors
- Wilfried Mueller - OMG AG & Co. KG
- Lutz Ruwisch - OMG AG & Co. KG
- Markus Koegel - OMG AG & Co. KG
- Stefan Franoschek - OMG AG & Co. KG
- Thomas Kreuzer - OMG AG & Co. KG
- Egbert Lox - OMG AG & Co. KG
- Christian Enderle - DaimlerChrysler AG
- Christof Schön - DaimlerChrysler AG
- Thomas Ried - DaimlerChrysler AG
Citation
Enderle, C., Schön, C., Ried, T., Mueller, W. et al., "Aftertreatment Catalyst Design for the New DaimlerChrysler Supercharged 4-Cylinder Engine with Direct Gasoline Injection," SAE Technical Paper 2003-01-1161, 2003, https://doi.org/10.4271/2003-01-1161.Also In
References
- Heil B. et al Der neue aufgeladene Mercedes-Benz 4-Zylinder-Ottomotor M271 mit Direkteinspritzung 3.Wiener Motorensymposium April 2002
- Goebel, U. Höhne, J. Lox, E. Müller, W. Okumura, A. Strehlau, W. Hori, M. Durability Aspects of NO x Storage Catalysts for Direct Injection Gasoline Vehicles SAE Tech. Paper 99011285 1999
- Neuhausen, U. New Generation Diesel Oxidation Catalysts Chemistry for Properties Port Elizabeth 2002
- Ruwisch L. Göbel U. Kögel M. Theis J. Kreuzer T. Lox E. Die neue Generation NO x -Speicherkatalysatoren Proc. 11. Aachener Kolloquium Fahrzeug- und Motorentechnik 2002
- Enderle C. Heil B. Schön C. Ried T. The exhaust gas system of the new Mercedes-Benz CLK 200 CGI with supercharged M 271 engine with gasoline direct injection Proc. 11. Aachener Kolloquium Fahrzeug- und Motorentechnik 2002