This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Formability Improvement of Deep Drawing for Automobile Parts
Technical Paper
2003-01-1154
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In this paper the deep drawing of sheet metal forming method, is very useful in industrial field because of its efficiency. In order to obtain the optimal products in deep drawing process, the deep drawing is affected by many process variables, such as blank shapes, profile radii of punch and die, formability of materials and so on. Especially, blank shape is very important formability factor. In this study, in order to investigate the effects of blank shape, we suggested three kinds of blank shapes and examined the friction test about three conditions. We measured the punch load distribution according to punch stroke under the conditions of profile radii of punch and die and observed the punch load of non-axisymmetric formability.
Recommended Content
Aerospace Material Specification | Molybdenum Alloy Bars 0.48Ti - 0.09Zr - 0.02C Arc Cast, Stress Relieved |
Aerospace Material Specification | Steel Sheet, Strip, and Plate 0.48 - 0.55C (SAE 1050) |
Authors
Citation
Park, D., "Formability Improvement of Deep Drawing for Automobile Parts," SAE Technical Paper 2003-01-1154, 2003, https://doi.org/10.4271/2003-01-1154.Also In
References
- Kim D. H. “Experimental study on minimizing wall thickness thinning for deep drawing of circular shells,” Korean Society for Technology of Plasticity 7 4 393 399 1998
- Hsu T. C. Lee S. Y. “On the drawability of sheet metal in noncircular cups,” ASME J. of Eng. for Industry 615 619 1977
- Majlessi S. A. Lee D. “Deep drawing square-shape sheet metal parts, Part 1: Finite element analysis,” ASME J. of Eng. for Industry 115 102 109 1993
- Majlessi S. A. Lee D. “Deep drawing square-shape sheet metal parts, Part 2: Experimental study,” ASME J. of Eng. for Industry 115 110 117 1993
- Kim D. H. “Influence of die shoulder radius and punch to die clearance for multistage deep drawing of complex cylindrical shell,” Korean Society for Technology of Plasticity 8 3 262 268 1999
- Park D. H. Bae W. R. Park S. B. Kang S. S. “An experimental Study on optimization of blank shape in elliptical deep drawing process,” Korean Society of Precision Engineering 16 10 101 108 1999
- Ray R. Berry J. T. “Prediction of press Loads in deep drawing Ti-6Al-4V, stainless steel AISI 304 and inconel X alloy under various conditions of lubrication at room temperature,” J. of Eng. for Industry, Trans. of ASME 412 1970
- Eary D. F. Reed E. A. Techniques of press working sheet metal Prentice-Hall 100 185 1974
- Park D. H. Bae W. R. Park S. B. Kang S. S. “Application surface area calculating system for design of blank shape of deep drawing product,” Korean Society of Precision Engineering 17 4 97 105 2000
- Marumo Y. Saiki H. “Estimation of the deep drawability of aluminum square cups by fracture forces,” Metals and Materials 4 3 372 375 1998
- Shunping Li “A study on the determination of blank shapes for deep-drawn parts,” Advanced Tech. of Plasticity 1567 1572 1993
- rabinowicz Ernest Friction and wear of materials John Wiley & Sons 2nd 25 1995