This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles
Technical Paper
2003-01-0703
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In Diesel injection Systems, cavitation often appears in the injection nozzle holes. This paper analyses how cavitation affects the Diesel spray behavior. For this purpose two spray parameters, mass flux and momentum flux, have been measured at different pressure. We know that cavitation brings about the mass flux choke, but there are few studies about how the cavitation affects the momentum and the outlet velocity. The key of this study is just the measurement of the spray momentum under cavitation conditions.
Recommended Content
Authors
Citation
Desantes, J., Payri, R., Salvador, F., and Gimeno, J., "Measurements of Spray Momentum for the Study of Cavitation in Diesel Injection Nozzles," SAE Technical Paper 2003-01-0703, 2003, https://doi.org/10.4271/2003-01-0703.Also In
References
- Pierpont, D.A. Reitz, R.D “ Effects on injection pressure and nozzle geometry on D.I. Diesel emissions and performance ” SAE paper 950604 1995
- Su, T.F. Farell, P.V. Nagarajan, R.T. “ Nozzle effects on High Pressure Diesel Injection ” SAE Paper 950083 1995
- Soteriou, C. Smith, M. Andrews, R. “ Direct Injection Diesel Sprays and the Effects of Cavitation and Hydraulic Flip on Atomization ” SAE Paper No. 950080 1995
- Chaves, H. Knapp, M. Kubitzek, A “ Experimental study of cavitation in the nozzle hole of diesel injectors using transparent nozzles ” SAE Paper 950290 1995
- Kampmann, S. Dittus, B. Mattes, P. Kirner, M. “ The influence of Hydro Grinding at VCO Nozzles on the Mixture Preparation in a DI Diesel Engine ” SAE Paper 960867
- Siebers, D. “ Scaling Liquid-Phase Penetration in Diesel Sprays Based on Mixing-Limited Vaporization ” SAE Paper 1999-01-0528
- Rajaratnam, N. “ Turbulent jets ” Elsevier Scientific Company 1974
- Bergwerk, W. “ Flow Pattern in Diesel Nozzle Spray Holes ” Proceedings of the Institute of Mechanical Engineers 173 1959
- Nurick, W. H. “ Orifice cavitation and its effect on spray mixing ” Journal of fluids engineering 98 681 687 1976
- Von Mises, R. “ Berechnung von Ausfluss und Überfallzahlen. ” Z.Ver. deutscher Ing. 61 1917
- Lichtarowicz, A.K. Duggins, R.K. Markland, E. “ Discharge coefficients for incompressible non-cavitating flow through long orifices ” J. Mech, Engng Sci. 7 2 1965
- Randall, L.N. “ Rocket applications of the cavitating venturi. ” ARS J. January-February 28 31 1952
- Payri, R. Margot, X. Salvador, F.S. “ A Numerical Study of the Influence of Diesel Nozzle Geometry on the Inner Cavitating Flow. ” SAE Paper 2002-02P-210
- Arcoumanis, C. Flora, H. Gavaises, M. “ Cavitation in Real Size Multi-Hole Diesel Injector Nozzles ” SAE Paper 2000-01-1249
- Arcoumanis, C. et al “ Nozzle Flow and Spray Characteristics from VCO Diesel Injector Nozzles ” Thiesel 2002
- Soteriou et al “ Through the Diesel Nozzle Hole - a Journey of Discovery II ” ILASS Europe 2001
- Stumpp, G. Ricco, M. “ Common Rail - An attractive fuel injection system for passenger car DI diesel engines ” SAE paper 960870 1996
- Flaig, U. Polach, W. Ziegler, G. “ Common Rail System (CR-System) for passenger car DI diesel engines; Experiences with applications for series production projects ” SAE paper 1999-01-0191 1991
- Bosch, W. “ The fuel rate indicator: a new instrument for display of the characteristic of individual injection ” SAE paper 660749 1966
- Schmidt, D.P. Corradini, M.L. “ Analytical prediction of the exit flow of cavitating orifices. ” Atomization and Sprays 7 6 603 616 1997
- Arai, M. Shimizu, M. Hiroyasu, H. “ Similarity between the breakup lengths of a high speed liquid jet in atmospheric and pressurized conditions ” ICLASS-91 Gaithersburg, Maryland 1991
- Hiroyasu, H. Arai, M. Shimizu, M. “ Break-up length of a liquid jet and internal flow in a nozzle ” ICLASS-91 Gaithersburg, Marylad July 1991
- Ruiz, F. “ A few useful relations for cavitating orifices ” ICLASS-91 Maryland July 1991
- Ryan, T.W. III “ Measurement of the instantaneous distribution of momentum in diesel injection nozzle fuel jets ” SAE paper 962004 1996
- Kayhan, H.G. Corradini, M.L. “ Insolated effects of ambient pressure, nozzle cavitation and hole Inlet geometry on diesel injection spray characteristics ” SAE paper 2000-01-2043 2000