This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Attribute Analysis and Criteria for Automotive Exhaust Systems
Technical Paper
2003-01-0221
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper summarizes the attributes of automotive exhaust system and provides a guideline for exhaust system design, analysis and development. The exhaust system has various attributes including vibration, acoustics or noise, durability and thermal distribution, flow and power loss, emission, in addition to its interface with vehicle. This paper describes all these attributes and the corresponding performances, and develops criteria for each of the attributes. The paper also describes the interfaces between the exhaust system and powerplant with body structure.
Recommended Content
Authors
Citation
Pang, J., Kurrle, P., Qatu, M., Rebandt, R. et al., "Attribute Analysis and Criteria for Automotive Exhaust Systems," SAE Technical Paper 2003-01-0221, 2003, https://doi.org/10.4271/2003-01-0221.Also In
Computer Aided Engineering of Vehicle & Engine Systems & Components
Number: SP-1740; Published: 2003-03-03
Number: SP-1740; Published: 2003-03-03
References
- Lee C. M. et al “Development of a simple numerical method of the exhaust system to find optimized design values” SAE 1999-02-1666
- Pang J. “D219 exhaust NVH analysis” Ford Motor Company internal report 2001
- Torregrosa A. J. at el “On the influence of manifold geometry on exhaust noise” SAE 1999-01-1650
- Qatu M. Recent research advances in the dynamic behavior of shells 1989-2000: Part 1 laminated shells” Applied Mechanics Reviews ASME 2001
- Qatu M. Recent research advances in the dynamic behavior of shells 1989-2000: Part 2 homogeneous shells” Applied Mechanics Reviews ASME 2001
- Zhou Ming et al “Exhaust manifold radiation noise prediction methodology” SAE 2001
- Kunz F. H. “Semi-empirical model for flow noise predication on intake and exhaust systems”
- Measurement of exhaust converter assembly acoustic radiation characteristics Ford Motor Company internal report
- Madaza test procedure no. MEST-T-VN100310-A
- Grinker Scott C. Ford radiation shell noise standard Arvin exhaust physical technologies 1999
- Okada M Abe T. Inaba M. “Study of the generation mechanism for abnormal exhaust noise” SAE 871924
- Siavoshani Saeed “V10 super duty excursion exhaust noise issues” Ford Motor Company interna; report May 2001
- Song G. “Exhaust system key life test” SAE 2001-01-1105 March 2001 Detroit, USA
- Selamet A. Yonak S.H. Novak J.M. Khan M. “The effect of vehicle exhaust system components on flow losses and noise in firing spark-ignition engine”
- Baronick J. et al “Modal measurement of raw exhaust volume and mass emissions by SESAM” SAE 980047
- WAVE Basic Manual, version 3.5 Ricardo, Inc. November 1999
- Nichols J. Crekaj F. “Exhaust NVH design guidance” Ford Motor Company internal report 2001
- Chassis CAE common practice for exhaust system Ford Motor Company internal material
- Martin, W.S. “Auto fundamental The Goodheart-Will Cox Company, Inc. Tinley Park, Illinois 2000
- Measurement of exhaust converter assembly acoustic radiation characteristics Ford Motor Company
- Lin J.S. Kostun J. “Global acoustic sensitivity analysis applied to the reduction of shell noise radiation of a simulated engine air induction system component SAE 980280 Feb. 1998
- Dedene L. et al “Engineering metrics for disturbing sound elements of automotive exhaust noise” SAE 1999-01-1653
- Hosomi Mikiya “Analysis of pulsation inside pipe and study on exhaust sound characteristics of V type 8 cylinder engine” SAE 1999-01-1651
- Harrison M.F. Davies P.O.A.L. “Rapid predictions of vehicle intake/exhaust radiated noise” SAE, 944053
- Storck H. “Experimental modal analysis of automotive exhaust structure” SAE 2001-01-0662
- Goktan A.G. Yetkin A. “A mathematical model for exhaust system vibration caused by road surface inputs” SAE 2001-01-1006
- Dedene L. et al “Engineering metrics for disturbing sound elements of automotive exhaust noise” SAE 1999-01-1653
- Lin J.S. Kostun J. “Global acoustic sensitivity analysis applied to the reduction of shell noise radiation of a simulated engine air induction system component”
- Cheng C.Y.R. Wu T.W. “Exhaust muffler design and analysis using a boundary element method based computer program”
- Inaba M. at el “A unique duel-mode muffler” proceedings of the fifth international pacific conference on automotive engineering Beijing, China Nov. 5-10 1989
- Lai P.C. Soedel W. “Free ga pulsation of a Helmholtz resonator attached to a thin muffler element” SAE 980281
- “Catalytic Converters: Theory and application” Ford Motor Company course manual 1992
- Takeyama S. Takeda H. Takagi Y. “Reduction in exhaust noise through exhaust valving modifications achieved with a gas dynamics simulation model” SAE 910617
- Welten H. Bressler H. Krause P. “Influence of catalytic converters on acoustics of exhaust systems for European cars” SAE 910836
- Lindner U. Mueller A. “Sound design - the BMW inline six-cylinder engine in different vehicle applications” SAE 2001-01-1428