This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Methodology for Reliability Design of Power Transmission
Technical Paper
2002-01-2201
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
With the worldwide competition so strong, it is essential that motor vehicles have high reliability. One of the ways to reach this goal is the methodology for reliability design of a motor vehicle, namely power transmission. Reliability design, within the stage of overall design, is in direct correlation with the reliability of motor vehicle.
The problem of a practical methodology for power transmission reliability design has been solved by the development of the methodology for this purpose. The basis of the developed methodology represents a contemporary approach to design, comprising the phases of conceptual, preliminary and detail design, with the application of the reliability design method within these phases.
Recommended Content
Technical Paper | John Deere Power Shift Transmission |
Technical Paper | A Wireless Multicast Protocol for Real-Time Communication Between On-Road Vehicles |
Technical Paper | Design Considerations in Powershift Transmissions |
Authors
Topic
Citation
Popovic, P. and Ivanovic, G., "The Methodology for Reliability Design of Power Transmission," SAE Technical Paper 2002-01-2201, 2002, https://doi.org/10.4271/2002-01-2201.Also In
SAE 2002 Transactions Journal of Passenger Cars - Mechanical Systems
Number: V111-6; Published: 2003-09-15
Number: V111-6; Published: 2003-09-15
References
- Popovic, P. 2001 “Development and application of the reliability design methodology of the power transmission of a motor vehicle” The Faculty of Mechanical Engineering Belgrade
- Popovic, P. Ivanovic, G. 1997 “Reliability design with respect to the operational effectiveness” 7th International MIRCE Symposium, System operational Effectiveness 281 292 Exeter
- Ivanovic, G. Popovic, P. Stojovic, M. Djokic, M. 1994 “Fault tree analysis applied to vehicle design” International Journal of Vehicles Design 15 416 424
- Todorovic, J. Zelenovic, D. 1990 “Effectiveness in Mechanical System” Science books Belgrade
- Demic, M. Popovic, P. 1999 “A supplement to determining of actual loads of FAP 1921 BK/36 4x2” Tehnika - Masinstvo 48 14 20 Belgrade
- Demic, M. Popovic, P. 1999 “Determination of Actual Loads of Dump Truck Systems and Aggregates” Mobility& Vehicles Mechanics 25 2 3 3 29 Kragujevac
- Popovic, P. 1992 “Research regime of loads stress and reliability of a freight vehicles FAP 1921 BK/4x2” Institute VINCA, Centre of Motor and Vehicle Belgrade
- Knezevic, J. 1993 “Reliability, Maintainability and Supportability Engineering - A Probabilistic Approach” McGraw Hill London
- O' Conor, P. 1996 Practical Reliability Engineering John Wiley and Sons Chichester
- Verma, D. Knezevic, J. 1995 “Development of fuzzy requirements matrix to support conceptual system design” 5th International MIRCE Symposium 339 345 Exeter
- Verma, D. Knezevic, J. 1994 “Conceptual system design evaluation: handling the uncertainty” 10th International Logistics Congress 118 131 Exeter
- Knezevic, J. Papic,. Lj. Aronov, J. 1996 “Advanced approaches to reliability and safety assurance of complex systems on the basis of FMECA method” 6th International MIRCE Symposium Exeter
- Blanchard, B.S. Fabrycky, W.J. 1998 “Systems Engineering and Analysis” Third Prentice Hall New Jersey
- Palmer, P. 1994 “Ground support equipment - CRAM philosophy” 10th International Logistics Congress 335 345 Exeter
- Agarwala, A. 1994 “Reliability engineering in defense and aerospace - a transition to the commercial world”
- Vikman, S. 1988 “Research for automotive reliability analysis methods” Proceedings “Automobile Reliability”
- Guthrie, V.H. Farquharson, J. A. Bonnett, R.W. Bjoro, E.F. 1990 “Guidelines for Integrating RAM Considerations into an Engineering Project” IEEE Transactions on Reliability 39 2 133 139
- Cross, N. 1994 “Engineering Design Methods: Strategies for Product Design” John Wiley and Sons Chichester
- Fox, J. 1993 “Quality Through Design: The Key To Successful Product Delivery” McGraw-Hill London
- Pugh, S. 1991 “Total Design: Integrated Methods for Successful Product Engineering” Addison-Wesley Publishing New York