This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Fuel Used for Vehicle Air Conditioning: A State-by-State Thermal Comfort-Based Approach
ISSN: 0148-7191, e-ISSN: 2688-3627
Published June 03, 2002 by SAE International in United States
Annotation ability available
Event: Future Car Congress
How much fuel does vehicle air conditioning actually use? This study attempts to answer that question to determine the national and state-by-state fuel use impact seen by using air conditioning in light duty gasoline vehicles. The study used data from US cities, representative of averages over the past 30 years, whose temperature, incident radiation, and humidity varied through time of day and day of year. National surveys estimated when people drive their vehicles during the day and throughout the year. A simple thermal comfort model based on Fanger's heat balance equations determined the percentage of time that a driver would use the air conditioning based on the premise that if a person were dissatisfied with the thermal environment, they would turn on the air conditioning. Vehicle simulations for typical US cars and trucks determined the fuel economy reduction seen with AC use. Combining these statistics and models with vehicle and truck registrations and vehicle miles traveled resulted in a state-by-state estimate of fuel used for air conditioning in vehicles. The study showed that the US uses 7.1 billion gallons (27 billion liters) of gasoline every year for air conditioning vehicles, equivalent to 6% of domestic petroleum consumption, or 10% of US imported crude oil.
CitationJohnson, V., "Fuel Used for Vehicle Air Conditioning: A State-by-State Thermal Comfort-Based Approach," SAE Technical Paper 2002-01-1957, 2002, https://doi.org/10.4271/2002-01-1957.
- Welstand, S.; and Gorse, R., “Effect of Air Conditioning on Regulated Emissions for In-Use Vehicles”, Coordinating Research Council, Inc. Project No. E-37, October 1999.
- Kelly, K.; Rajagopalan, A., “Benchmarking of OEM Hybrid Electric Vehicles at NREL,” NREL TP-540-31086, August 2001.
- Rugh, J.; Howard, R.; Farrington, R.; Cuddy, M.; Blake, D.; “Innovative Techniques for Decreasing Advance Vehicle Auxiliary Loads,” SAE FutureCar Congress 2000-01-1562, April, 2000.
- Marion, W.; Urban, K., “User's Manual for TMY2s, Typical Meteorological Years,” June 1995, NREL Report SP-463-7668.
- Rugh, J.; Farrington, R.; Boettcher, J., “The Impact of Metal-free Solar Reflective Film on Vehicle Climate Control,” SAE VTMS 2001-01-1721.
- Fanger, P. O. 1982. Thermal Comfort. Robet E. Krieger Publishing Company, Malabar, FL.
- 1997 ASHRAE Fundamentals Handbook, Chapter 8.
- Rohles, F.H., Jr. 1980. “The preferred indoor comfort temperatures.” Report No. 80-02, Institute for Environmental Research, Kansas State University, Manhattan, KS.
- International Standards Organization (ISO) 7730 “Moderate thermal environments-Determination of the PMV and PPD indices and specification of the conditions for thermal comfort.”
- American Society for Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) Standard 55.
- National Personal Transportation Survey, 1995 http://www-cta.ornl.gov/npts/1995/Doc/index.shtml.
- Wards 2001 Automotive Yearbook.
- Advanced Vehicle Simulator (ADVISOR) Version 3.2, http://www.ctts.nrel.gov/analysis/
- Department of Energy's Energy Information Administration (EIA), April 2001 http://www.iea.doe.gov/cabs/usa.html.