This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Low Cost Carbon Fiber for the Next Generation of Vehicles:Novel Technologies
Technical Paper
2002-01-1906
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Future Car Congress
Language:
English
Abstract
Automobiles of the future will be forced to travel further on a tank of fuel while discharging lower levels of pollutants. Currently, the United States uses in excess of 18 million barrels of petroleum per day. Sixty-six percent is used in the transportation of people and goods. Highway vehicles currently account for just under two-thirds of the nation's gasoline consumption, and about one-third of the total United States energy usage [1] while contributing a significant amount to the annual U.S. air pollutant burden. In 1997, 57.5% of the carbon monoxide, 29.8% of the nitrogen oxides, 27.2% of the volatile organic compounds, and 23.8% of the carbon dioxide came from highway vehicles [2] The U.S. government has supported R&D pertinent to highway vehicles since the early 1960's, to mitigate these problems. The objective of the current Department of Energy programs is the development and eventual commercial application of new technologies that will enable the U.S. highway transportation industry to make significant contributions to the nation=s environmental goals while maintaining the superior transportation system that strengthens our economy. In the past three decades domestic (U.S.) automotive manufacturers have aggressively sought to develop technologies to increase the fuel efficiency of vehicles while reducing their environmental impact and satisfying consumer needs. The founding of the United States Council for Automotive Research (USCAR) has accelerated this effort by combining the resources of the automotive industry and the federal government.
Carbon fiber based materials have the potential to make the goals of government, industry and consumers a reality. Current global carbon fiber production capacity for commercial grade fiber is on the order of 50 million pounds per year. Current North American vehicle production is >18 million units per year. Just 10 pounds of carbon fiber in each North American vehicle would create a demand that is almost four times the current world production capacity. Such high volume production would dramatically alter the industry resulting in a number of other spin-off applications. To achieve such drastic industry scale-up will require changes to carbon fiber production technologies, production facilities, packaging, emission control procedures and possibly even changes in the precursors used to manufacture carbon fiber.
Recommended Content
Authors
Topic
Citation
Warren, C., Shaffer, J., Paulauskas, F., and Abdullah, M., "Low Cost Carbon Fiber for the Next Generation of Vehicles:Novel Technologies," SAE Technical Paper 2002-01-1906, 2002, https://doi.org/10.4271/2002-01-1906.Also In
References
- Baxter, Donald F. “Plastics Beat the Heat in Underhood Components” Advanced Materials & Processes May 1990 36 41
- Carpenter, Joseph A. Jr. “U.S. Government-Supported R&D on Materials for HighlyFuel-Efficient Automotive Vehicles” Proceedings of the 4th International Conference on Eco-Materials Gifu, Japan Nov 9-12 1999 463 466
- Program Staff - Office of Transportation Technologies Energy Efficiency and Renewable Energy Office of Advanced Automotive Technologies R&D Plan -Energy Efficient Vehicles for a Cleaner Environment March 1998 75 88
- Paulauskas, F.L. Warren, C. D. “Adhesive Bonding/Joining Via Exposure to Microwave Radiation” Proceedings of the 27th International SAMPE Technical Conference Albuquerque, N.M. Oct 9-12 1995
- Curlee, T. R. Das, S. Rizy, C. G. Schexnayder, S. M. Recent Trends in Automobile Recycling: An Energy and Economic Assessment Oak Ridge National Laboratory March 1994 5 10
- Venditti North Carolina State University “Low Cost Carbon Fiber From Renewable Resources” Proceedings of Midwest Advanced Materials and Processing Conference/SAMPE-DOE-SPE Advanced Composites Conference Dearborn, MI Sept 12-14 2000
- Griffith W. L. Compare A. L. Shaffer J. T. Leitten, C. F. Jr. Oak RidgeNational Laboratory Gilbert R. D. Kadla J. F. Kubo S.
- McConnell, Vicki P. “In the Fast Track: Composites in Race Cars” Advanced Composites March April 1991 23 35
- USCAR “A Smashing Success for Composites” USCAR Mileposts Newsletter Winter 1997
- USCAR “Popular Science Names Chevrolet's Truck Box One of Ten ‘Best of What's New’” USCAR Mileposts Newsletter Winter 2000 4
- Automotive Composites Alliance “Ford Explorer Sport Trac: On the Right Track with Composite Box” Wards Auto World Jan 2000
- Defosse, Matthew T. “Ford, GM move to Composite Truck Beds,” Modern Plastics 1 October 1999
- Chapman, Gilbert B. “A Thermoplastic Approach to a Composite Automotive Body,” SAE Paper No. 1999-01-3222 The Society of Automotive Engineers Warrendale, PA
- Das, Sujit “The R&D Needs to Improve the Economic Viability of Polymer Composites in Automotive Applications” ORNL Internal Report May 2000
- Automotive Composites Alliance “Also New for 2000....” Wards Auto World Jan 2000
- Loud, Steve “The Car Does it All” Advanced Materials & Composites News 22 4 487 21 February 2000 1 4
- Loud, Steve “Eaton Carbon Fiber Limited Slip Differential for KIA” Advanced Materials & Composites News 3 7 91 9 February 2002
- Das, S. Cohn, S. M. A Cost Assessment of Conventional PAN Carbon Fiber Production Technology Internal Report Oak Ridge National Laboratory Nov 1998