This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Particulate Emissions From a Modern Light Duty CIDI Engine
Technical Paper
2002-01-1869
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper reports an effort to measure particulate emissions from a modern light duty CIDI engine equipped with a common-rail fuel injection system, a closed loop EGR system and a state-of-the-art aftertreatment system. Particulate emissions both upstream and downstream of the catalyst were measured using an SMPS system and a TEOM while operating the engine at various steady-state conditions. The measurements upstream of the catalyst show that the particulate emissions are strongly dependent on the engine speed, load and EGR conditions. The measurements downstream of the catalyst show the effectiveness of the catalyst in reducing particulate mass emissions by 20-80%, with reductions in particulate mean diameters averaging about 10%. The trends observed are discussed in terms of previously established particulate formation and destruction mechanisms.
Recommended Content
Technical Paper | DPF Technology for Older Vehicles and High Sulphur Fuel |
Journal Article | Effect of EGR on Particle Emissions from a GDI Engine |
Technical Paper | Exhaust Particulate Emissions from Two Port Fuel Injected Spark Ignition Engines |
Authors
Citation
Gupta, S., Cole, R., Vazquez, F., and Sekar, R., "Particulate Emissions From a Modern Light Duty CIDI Engine," SAE Technical Paper 2002-01-1869, 2002, https://doi.org/10.4271/2002-01-1869.Also In
References
- Kittleson D. B. “Engines and Nanoparticles: A Review,” J. Aerosol science 29 5 6 575 588 1988
- Luders H. Kruger M. Stommel P. Luers B. “The Role of sampling Conditions in Particle Size Distribution Measurements,” SAE 981374
- Abdul-Khalek I. S. Kittleson D. B. Graskow B. R. Wei Q. Brear F. “Diesel exhaust Particle Size: Measurement Issues and Trends,” SAE 980525