This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Methodology for Determining Octane Response at Different Altitudes for Vehicles Equipped with Knock Sensors
Technical Paper
2002-01-1663
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Road testing to determine the altitude/octane sensitivity of fuels and vehicles has traditionally been conducted according to the CRC E-15 method, which is based on the detection of audible knock. With the introduction of knock-sensors on modern engines, this method is no longer considered to be appropriate or viable. Acceleration-based methods have been proposed as an alternative technique for octane-requirement evaluation but, in terms of altitude-effect investigations, such methods are subject to the complexities of air density variations and its impact on overall vehicle acceleration. The present paper explores a more fundamental approach by extending the acceleration concept to its logical conclusion and deducing the underlying engine torque curve. This approach revealed the activity of the knock sensor directly in terms of its influence on the engine torque and it was concluded that the method represents an eminently suitable technique for altitude/octane evaluation. Accurate measurement of the vehicles acceleration was critical to the success of the method and was facilitated by the used of modern GPS technology.
Recommended Content
Authors
Citation
Yates, A. and Mkwanazi, S., "Methodology for Determining Octane Response at Different Altitudes for Vehicles Equipped with Knock Sensors," SAE Technical Paper 2002-01-1663, 2002, https://doi.org/10.4271/2002-01-1663.Also In
References
- “Effect of Altitude Changes on Octane Number Requirement of Late Model Cars” CRC Report 454 1973
- “1977 CRC Altitude Program” CRC Report 500 1979
- “1981 CRC Altitude Octane Requirement Program” CRC Report 523 1981
- “Technique for Determining of Octane Number Requirements of Light Duty vehicles” CRC Designation E-15-86 April 1985
- Kraus, B J Godici, P E King, W H “Reduction of Octane Requirement by Knock Sensor Spark Retard System” SAE paper 780155 1978
- Steckle, W.M. “Vehicle Octane Number Requirements Versus Altitude - Another Look” SAE Paper 892035 1989
- McNally, M J Callison, J C Evans, B Graham, J P Swaynos, D V Uihlein, J P Wusz, T “The Effects fo Gasoline Quality on Vehicle Acceleration Performance - A CRC Study” SAE paper 192394 1991
- Whelan, W E Schmidt, G K Hischier, M E “An Acceleration Based Method to Determine the Octane Number Requirement of Knock Sensor Equipped Vehicles” SAE Paper 982721 1998
- Gillespie, T P “ Fundamentals of Vehicles Dynamics ” SAE 1992