This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
The Influence of Different Cooling Media on Properties of Carburized Layers
Technical Paper
2002-01-1481
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Research results of structure and select properties (hardness, impact strength, wear resistance) carburized parts and tempered in three different cooling media: water, oil and aqueous polymer solutions are discussed. These results showed that structure and properties of case and core of carburized part is most profitable after using an aqueous polyalkylene glycol - PAG polymer solutions.
Authors
Citation
Przyłęcka, M., Gęstwa, W., and Totten, G., "The Influence of Different Cooling Media on Properties of Carburized Layers," SAE Technical Paper 2002-01-1481, 2002, https://doi.org/10.4271/2002-01-1481.Also In
References
- Przyłęcka M. The modeling of structure and properties of carburized low-chromium hypereutectoid steels Journal of Materials Engineering and Performance ASM International Materials Park, Ohio 5 2 April 1996 1059-9495
- Gęstwa W. 1997
- Przyłęcka M. Gęstwa W. The Modeling of Residual Stresses after Direct Hardening of Carburized and Carbonitrided Low-Chromium Hypereutectoid Steels (ŁH15) “MAT-TEC 97”, “Analysis of residual stresses from materials to bio-materials” IITT International 1997
- Przyłęcka M. Gęstwa W. 4 105 1998 0208-6247
- Przyłęcka M. Gęstwa W. The modeling residual stresses of carburizing chromium and chromium-nickel of constructional steels after quenching mediums 3rd International Conference On Quenching And Control Of Distortion ASM 24-26 03 1999 Praga,Czechy
- Przyłęcka M. Gęstwa W. The modeling residual stresses of carbonitriding chromium and chromium-nickel steels after quench hardening in different quenching mediums 3rd International Conference On Quenching And Control Of Distortion ASM 24-26 03 1999 Praga,Czechy
- Przyłęcka M. Gęstwa W. 5 112 1999 0208-6247
- Toten G.E. Dakins M.E. Jarvis L.M. How H-factors can be used to characterize polymers Heat Treating December 1989
- Prospekt firmy Union Carbide Corporation UCON ® Quenchants E and E-NN Danbury
- Prospekt firmy Union Carbide Corporation Ucon Fluids&Lubricants-UCON ® Quenchants A and A-NN Danbury
- Prospekt firmy Union Carbide Corporation UCON ® Quenchants HT and HT-NN Danbury
- Grum J. Bozic S. Lavric R. Influence of Mass of Steel and a Quenching Agent on Mechanical Properties of Steels Heat Treating 1998
- Kobasko N.I. Toten G.E. Webster G.M. Bates C.E. Compresion of Cooling Capacity af Aqueous Poly (Alkylene Glycol) Quenchants with Water and Oil Heat Treating 1998
- Dakins M.E. Bates C.E. Toten G.E. Estimating Quench Severity With Cooling Curves Heat Treating April 1992
- Toten G.E. Dakins M.E. Heins R.W. Cooling Curve Analysis of Synthetic Quenchants - A Historical Perspective J. Heat Treating 6 2 1988
- Toten G.E. Sun Y. Webster G.M. Jarvis L.M. Bates C.E. Quenchants Selection Heat Treating 1998
- Peyre J.P. Tournier C. 1985 2-85400-052-8
- Toten G.E. Bates C.E. Clinton N.A. Handbook of Quenchants and Quenching Technology ASM International Materials Park, Ohio, 507 str. 0-87170-448-X
- Przyłęcka M. 1988
- Kagan A.S. 1981
- Przyłęcka M. Gęstwa W. 6 119 2000
- Przyłęcka M. Gęstwa W. Totten G.E. The modelling of structure and properties of carburizing or carbonitriding layers, as well as hardening in different quenching mediums Heat Treating proceedings of the 20 th Conference 9-12 October 2000 St.Louis, Missouri,USA
- Przyłęcka M. Gęstwa W. 2000
- Lesage J. Chicot D. Przyłęcka M. Kulka M. Gęstwa W. 276 1994
- Przyłęcka M. Gęstwa W. 1999
- Gęstwa W. Przyłęcka M. Kulka M. The influence of carbonitriding and heat treatment on the properties or low- and highcarbon steels The Second ASM Heat Treatment And Surface Engineering Proceedings And Exhibition In Europe Dortmund (Germany) Westfallenhallen 1÷3 June 1993
- Nosov V.B. Yurasov S.A. Metal Science and Heat Treatment 37 1 Jan. 1995
- Nosov V.B. Yurasov S.A. 1 Jan 1995
- Parrish G. Carburizing - Microstructures and Properties December 1999 American Society for Metals International Metals Park, Ohio 44073 0-87170-666-0
- Totten G.E. Howes M.A.H. Steel Heat Treatment Handbook Marcel Dekker, Inc. 0-8247-9750-7
- Shaw B.A. Abudaia F.B. Evans J.T. Chracterization of retained austenite in case carburised gears and its influence on fatigue performance Heat Treating proceedings of the 20 th Conference 9-12 October 2000 St.Louis, Missouri,USA
- Edmonds D.V. The use of retained austenite in the study of phase transformations Heat Treating proceedings of the 20 th Conference 9-12 October 2000 St.Louis, Missouri,USA
- Razim C. 40 1985 4
- Meyzaud Y. Sauzay C. 61 74 1994
- Denis S. Simon A. Beck G. Estimation of the Effect Stress/Phase Transformation Interaction when Calculating Internal Stress during Martensitic Quenching of Steel Trans. ISIJ 22 1982
- Koistinen DP. The Distribution of Residual Stresses in Carburised Cases and Their Origin Trans. ASM 50 1958 227 241
- Diesburg D.E. Kim C. Fairhurst W. Microstructural and Residual Stress Effects on the Fracture of Case-Hardened Steels paper 23, Heat Treatment '81 (University of Aston), The Metals Society Sept 1981
- Wiegand K Tolasch G. The Combined Effect of Individual Factors on Raising the Alternating Bending Fatigue Strength of Case-Hardened Test Pieces 22 Oct 1967 213 220
- UCON ® Quenchants User's Manual Union Carbide Corporation 39 Old Ridgebury Road, Danbury, CT 06817-0001
- Karp J. Ratuszek W. Pofelska I. 1970
- Senczyk D. Głowacki Z. Barbacki A. 7 37 1996
- Lampe J. 1980
- Karp J. Pofelska-Filip I. 1979