This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Assessment of the Eaton (Vickers) V-104C Vane Pump as an Anttiwear Lubrication Tester
Technical Paper
2002-01-1429
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
For many years the ASTM D2882 test method, using the V-104C Vane pump, served the industry well to evaluate the lubricating properties of hydraulic fluids at low pressures (< 2000 psi). However, at higher pressures in different types of pumps (i.e. piston pumps), this method may not be reliable enough to predict satisfactory lubrication performance in commercial applications. In this paper the V-104C pump will be evaluated in terms of vane contact force and film thickness parameters to assertain the possibility of using a modified bench test to better predict hydraulic fluid performance at higher pressures.
Recommended Content
Authors
Citation
Totten, G., Ashraf, B., and Bishop, R., "Assessment of the Eaton (Vickers) V-104C Vane Pump as an Anttiwear Lubrication Tester," SAE Technical Paper 2002-01-1429, 2002, https://doi.org/10.4271/2002-01-1429.Also In
References
- Macleod A.J. “Developments in Hydraulic Oils” Industrial Lubrication 1968 January 11 19
- Totten G.E. Bishop R.J. Kling G.H. “Evaluation of Hydraulic Fluid Performance: Correlation of Water-Glycol Fluid Performance by ASTM D2882 Vane Pump and Various Bench Tests” SAE Technical Paper Series, Paper Number 952156 1995
- Mizuhara K. Tsuya Y. “Investigation of a Method for Evaluating Fire-Resistant Hydraulic Fluids by Means of an Oil Testing Machine” Proceed. Of the JSLE Int. Tribology Conf. July 8-10 1985 Tokyo, Japan. 853 858
- Renard R. Dalibert A. “On the Evaluation of Mechanical Properties of Hydraulic Oils” Inst. Petroleum J. 1962 55 542 110 116
- Yu Muzykin D. Livada G.F. Mozharov M.V. Matsak A.T. “Working of Coupled Friction Pairs in Hydraulic Drives with a Nonflammable Pressure Fluid” Vestn. Mashinostr. 1978 58 12 42 44
- Klaus E.E. Perez J.M. “Comparative Evaluation of Several Hydraulic Fluids Operational Equipment, a Full-Scale Pump Test Stand, and the Four-Ball Wear in Tester SAE Technical Paper Series, Paper Number 831680 1983
- Perez J.M. Hansen R.C. Klaus E.E. “Comparative Evaluation of Several Hydraulic Fluids Operational Equipment, a Full-Scale Pump Test Stand, and the Four-Ball Wear in Tester, Part II. Phosphate Esters, Glycols and Mineral Oils” Lubrication Engineering 1990 46 4 249 255
- Perez J.M. Klaus E.E. Hansen R.C. Klaus E.E. Perez J.M. “Comparative Evaluation of Several Hydraulic Fluids Operational Equipment, a Full-Scale Pump Test Stand, and the Four-Ball Wear in Tester” Lubrication Engineering 1996 52 5 416 422
- Feldmann D.G. Hinrichs J. Kessler, M. Nottrodt J. “Determination of the Application Properties of Rapidly Biodegradable Hydraulic Fluids by Laboratory Tests” In Industrial and Automotive Lubrication, 11 th Int. Colloquium Bartz W.J. January 13-15 1998 Esslingen Technical Academy 1 271 282
- Feldmann D.G. Kessler M. “Evaluation of Application Related Properties of Hydraulic Fluids by Laboratory Tests and Experiences with Biodegradable Fluids in Laboratory and Field SAE Technical Paper Series, Paper Number 982002 1998
- Kessler M. Feldmann D.G. “Mechanical Testing of Hydraulic Fluids” Dtsch. Wiss. Ges. Erdoel, Erdgas Kohle 1999 514 I 1 84
- Shrey W.M. Lubrication Engineering 1959 15 54 67
- Reiland W.H. “Predicting the Performance of a Wear-Resistant Oil” Hydraulics & Pneumatics 1968 March 96 98
- Thoenes H.W. Bauer K. Herman P. “Testing the Antiwear Characteristics of Hydraulic Fluids: Experience with Test Rigs Using a Vickers Pump” IP. Int. Symposium, Performance Testing of Hydraulic Fluids Tourret R. Wright E.P. 1978 Heydon and Son Ltd. Oct. 1978 London, England 21 30
- Totten G.E. Bishop R.J. “Evaluation of V-104C and 20VQ5 Vane Pumps for ASTM D-2882 Wear Tests Using Water Glycol Hydraulic Fluids” Tribology of Hydraulic Pump Testing, STP 1310 Totten G.E. Kling G.H. Smolenski D.J. 1996 American Society for Testing and Materials West Conshohocken, PA 118 128
- Kunz A. Matthes B. Broszeit E. Kloos K.-H. “Application of TiN-Coated Bushings in the Standard Method for Indicating the Wear Characteristics of Hydraulic Fluids in Vane Pumps” Wear 1993 162-164 966 970
- Gent G.M. Totten G.E. Bishop R.J. “Review of ASTM D-2882 Hardware Problems and Suggested Solutions” SAE Technical Paper Series, Paper Number 982021 1998
- Totten G.E. Bishop R.J. Jr. Webster G.M. “Water-Glycol Hydraulic Fluid Evaluation by ASTM D 2882: Significant Contributors to Erroneous Results” SAE Technical Paper Series, Paper Number 961740 1996
- Rainwater R.L. “An Experimental Study of Wear and Effects of Anti-Wear Fluids: Development of a Wear Test Model” Sixth Annual Fluid Power Research Conference, Fluid Power Research Center Oklahona State University Stillwater, OK 1972 37 71
- Chirachella D.A. Jack R.W. Baniak E.A. “Development of a High Pressure Vane Type Hydraulic Pump Test” SAE Technical Paper Series, Paper Number 750854
- Kunz A. Gellrich R. Beckman G. Broszeit E. “Theoretical and Practical Aspects of Wear of Vane Pumps: Part B. Analysis of Wear Behavior in the Vickers Vane Pump Test” Wear 1995 181-183 868 875
- Karmel A.M. “A Study of the Internal Forces in a Variable-Displacement Vane Pump - Part I: A Theoretical Analysis” J. of Fluids Engineering 1986 108 227 232
- Urata E. Iwaizumi Y. Iwamoto K. “Assessment of Antiwear Properties of Jigh-Water Content Fluids using a Vickers V104C Vane Pump” Yuatsu to Kuiatsu 1986 17 7 543 553
- Griffith J.Q. Reiland W.H. Williams E.S. “Laboratory and Field Performance of Wear Resistant, Antileak Hydraulic Oils” Paper Presented at the National Fuels and Lubricants Meeting September 17-18 1969 New York City, NY National Petroleum Refiners Association Washington, DC
- Zino A.J. “What to Look for in Hydraulic Oils - Lubricating Value” American Machinist 1948 January 15 97 100
- Weaver J.J. “Hydraulic Pump-Wear Radiotracer Technique” Lubrication Engineering 1965 21 12 15
- Weaver J. “Hydraulic Pump-Wear Radiotracer Technique” Reprint Number 64AM, Paper presented at the 1964 ASLE Annual Meeting May 26-28 Chicago, IL
- Horiuchi T. “Hydraulic Fluids and Trends in Oil Pumps and Motors” Nisseki Review, 1079 21 3 151 158
- Langosch O. “Calculating and Testing the Design Element Hydraulic Oil Őlhydraulik und Pneumatik 1972 16 12 498 501
- Jung S-H. Bak U-S. Oh S-H. Chae H-C. Jung J-J. “Experimental Study on the Friction Characteristics of an Oil Hydraulic Vane Pump” Proceed. Of the International Tribology Conference III Yokohama 1995 Japanese Society of Tribologists Tokyo, Japan 1621 1625
- Wedeven L.D. Totten G.E. Bishop R.J. Jr. “Performance Map and Film Thickness Characterization of Hydraulic Fluids” SAE Technical Paper Series, Paper Number 952091 1995
- Tan Runhua Caiyun Yan “The Application of elastohydrodynamic Lubrication to the Design of Variable Displacement Vane Pump” J. of Hebei Institute of Technology 1991 20 3 43 50
- Wedeven L.D. Totten G.E. Bishop R.J. Jr. “Performance Map Characterization of Hydraulic Fluids” SAE Technical Paper Series, Paper Number 941752 1994
- Dalmaz G. “Traction and film Thickness Measurements of a Water Glycol and a water in oil Emulsion in Rolling-Sliding Contact” Proc. 7 th Leeds-Lyon Symp. On Tribology, Friction and Traction September 1980 231 242
- Gellrich G. Kunz A. Beckmann G. Broszeit E. “Theoretical and Practical Aspects of the Wear of Vane Pumps - Part A: Adaptation of a Model for Predictive Wear Calculation” Wear 1995 181-183 862 867
- Kunz A. Broszeit E. “Comparison of Vane Pump Tests Using Different Vickers Vane Pumps” Tribology of Hydraulic Pump Testing, STP 1310 Totten G.E. Kling G.H. Smolenski D.J. 1996 American Society for Testing and Materials West Conshohocken, PA 140 155