This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Structure of Carburized Layers With High Wear Resistance
Technical Paper
2002-01-1392
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The effect phase composition of carburized constructional steels with a particular focus on the influence of retained austenite and carbides on hardness, impact strength and wear resistance is described. It is shown that increasing retained austenite and carbide content of the hardened carburized layers exhibits useful properties.
Authors
Citation
Przyłęcka, M., Gęstwa, W., and Totten, G., "Structure of Carburized Layers With High Wear Resistance," SAE Technical Paper 2002-01-1392, 2002, https://doi.org/10.4271/2002-01-1392.Also In
References
- Peyre J.P. Tournier C. Choix des traitements thermiques superficiels Center technique des Industries Mécaniques Paris 1985
- Przyłęcka M. Materiałowo - technologiczne aspekty trwałońści łożysk tocznych., Politechnika Poznańska, Seria Rozprawy Nr202 Poznań 1988 300
- Prospekt firmy Union Carbide Corporation UCON® Quenchants E and E-NN.; Ucon Fluids&Lubricants-UCON® Quenchants A and A-NN.; UCON® Quenchants HT and HT-NN Danbury
- Liščić B. Tensi H.M. Luty W. Theory and Technology of Quenching Springer-Verlag London 1992 484
- Luty W. Chłodziwa hartownicze, Wydawnictwo Naukowo-Techniczne Warszawa 1986 200
- Przyłęcka M. Journal of Materials Engineering and Performance ASM International, Materials Park, Ohio, Jurnal of Materials Engineering and Performance 5 2 1996
- Gęstwa W. Azotonawęglanie wybranych stopów Fe-Cr-Mn-Si, Praca doktorska, Politechnika Poznańska Poznań 1997
- Przyłęcka M. Gęstwa W. “MAT-TEC 97”, “Analysis of residual stresses from materials to bio-materials” IITT International 1997
- Przyłęcka M. Gęstwa W. Inżynieria Materiałowa, nr 4 (105), lipiec-sierpień 1998
- Przyłęcka M. Gęstwa W. 3rd International Conference On Quenching And Control Of Distortion ASM 24-26 03 1999 Praga, Czechy
- Przyłęcka M. Gęstwa W. 3rd International Conference On Quenching And Control Of Distortion ASM 24-26 03 1999 Praga, Czechy
- Przyłęcka M. Gęstwa W. Inżynieria Materiłowa 112 1999
- Grysa K. Przyłęcka M. Przyłęcki Z. Prace Badawcze Komisji Technologii Budowy Maszyn PAN, Oddział w Poznaniu, z.2 1981 125 140
- Lesage J. Chicot D. Przyłęcka M. Kulka M. Gęstwa W. Traitement Thermique 276 1994 42 46
- Gęstwa W. Przyłęcka M. Kulka M. Archiwum Technologii Budowy Maszyn, z.13 Poznań 1994 111 121
- Przyłęcka M. Gęstwa W. Inżynieria Powierzchni,nr2,czerwiec 1999 W-wa 31 37
- Gęstwa W. Przyłęcka M. Kulka M. The Second ASM Heat Treatment And Surface Engineering Proceedings And Exhibition In Europe Dortmund (Germany) 1÷3 June 1993 239 246
- Przyłęcka M. Pertek A. AMT'92, XIII Konferencja Metaloznawcza - Nowoczesne Materiały i Technologie Warszawa - Popowo 23÷25 09 1992 215 216
- Przyłęcka M. Kulka M. Gęstwa W. International Heat Treating Conference: Equipment and Processes, Hyatt Regency Woodfield Schaumburg, Illinois (USA) 18-20 04 1994 233 238
- Gęstwa W. Przyłęcka M. Kulka M. 9 th International Conference on Heat Treatment and Surface Engineering Nice (France) 26-28 09 1994 507 508
- Pertek A. Przyłęcka M. Seminarium “Metodyczne problemy pomiarów naprężeń własnych” Poznań-Puszczykowo 1994
- Przyłęcka M. Kulka M. Gęstwa W. Extenden Abstracts Volume, 14th International Scientific Conference Advanced Materials & Technologies Gliwice-Zakopane, Poland 17-21 May 1995 369 372
- Gęstwa W. Przyłęcka M. Kulka M. 4th International Scientific Conference Achievements in Mechanical & Materials Engineering Gliwice-Wisła November 30th December 1st 1995 109 112
- Przyłęcka M. Gęstwa W. Międzynarodowego Seminarium “Inżynieria Powierzchni'97” Warszawa 1997 27 32
- Przyłęcka M. Gęstwa W. Międzynarodowego Seminarium “Inżynieria Powierzchni'97” Warszawa 1997 27a 32a
- Przyłęcka M. Gęstwa W. Międzynarodowego Seminarium “Inżynieria Powierzchni'97” Warszawa 1997 33 38
- Lee, H-Y Journal of the Korean Institute of Metals and Materials (South Korea) 34 2 Feb. 1996 150 157
- Lesage J. Chicot D. AI Karaischi M. Steel Research 60 8 1989 370 374
- Parrish G. The Influence of Microstructure on the Properties of Case-Carburized Components American Society for Metals Metals Park, Ohio 44073 1980 193
- Rangaswamy, P Bourke, MAM Lawson, AC O'Rourke, J Goldstone, JA Government Research Announcements and Index (USA) 1995 13 19
- Przyłęcka M. Gęstwa W. Inżynieria Powierzchni Warszawa, czerwiec 1999
- Totten G.E. Dakins M.E. Heins R.W. Jurnal of Heat Treating 6 2 1988 87 95
- Totten G.E. Dakins M.E. Jarvis L.M. Jurnal of Heat Treating 12 1989 28 29
- Dakins M.E. Bates C.E. Totten G.E. Jurnal of Heat Treating April 1992 24 26
- Janowski S. Metaloznawstwo, Obróbka Cieplna, Inżynieria Powierzchni 79 1986 6 12
- Burakowski T. Senatorski J. Tacikowski J. Trybologia 6 1986 4 8
- Senatorski J. Tacikowski J. Trybologia 2 1988 11 13
- Mittemeijer E.J. Slycke J.T. Heat Treatment of Metals 23 3 67 71 1996
- Movchan V.I. Dolzhenkov I.E Movchan A.V. Metallovedenie i Termicheskaya Obrabotka Metalloy 5 May 1995 4 7
- Murai N. Takayama T. I inni Journal of the Iron and Steel Institute of Japan 83 3 Mar 1997 215 220
- Moon W.J. Kano C.Y Suno J.M. Journal of the Korean Institute of Metals and Materials 35 3 Mar 1997 297 304
- Nosov V.B. Yurasov S.A. Metal Science and Heat Treatment 37 1 Jan. 1995 16 21
- Nosov V.B. Yurasov S.A. Metallovedenie i Termicheskaya Obrabotka Metalloy 1 Jan 1995 19 24
- Tikhonov A.K. Palagin YUM. Metal Science and Heat Treatment 36 11-12 May 1995 655 657
- Heat Treatment of Metals (China) 2 Feb. 1997 10 12
- Burakowski T. Wierzchoń T. Surface Enginnering of Metals, CRC Series in Materials Science and Technology CRC Press New York 1999
- Brerwirch G. Schweiz Archiv 4 1964 104
- Mendiratta M.G. Sasser J. Krauss G. Effect of dissolved carbon on microcracking in martensite of an Fe-1,39C alloy Metal. Transactions. 62 1969 351 353
- Grange R.A. Metal. Transactions 62 1969 1024 1027
- Apple F.A. Krauss G. Microcraking and fatigue in carburized steel Metal. Transactions 4 1973 1195 1200
- Krauss G. The microstructure and fatigue of carburized steel Metal. Transactions 9A 1978 1527 1535
- Gulalev A.P. Serebriusikov L.N. Metallovedenie i Termicheskaya Obrabotka Metalloy 4 1977 2 5
- Balter M.A. Dukarevicz J.S. Metallovedenie i Termicheskaya Obrabotka Metalloy 7 1985 50 53
- Balter M.A. Dukarevicz J.S. Metallovedenie i Termicheskaya Obrabotka Metalloy 9 1979 20 24
- Degallaix G. Chicot D. Baralis J. Lesage J. Modéle simplifié contraintes résiduelles dans les couches traités superficiellement Memoires et Études Scientifiques Revue de Métallurgiee 1990 113 122
- Kulka M. Przyłęcka M. Gęstwa W. Wybrane zagadnienia nawęglania, ze szczególnym uwzględnieniem obszaru dwufazowego austenit -cementyt Instytut Badań i Ekspertyz Naukowych Gorzów 1993 164
- Przyłęcka M. Gęstwa W. The modelling of structure and properties of carburizing or carbonitriding layers, as well as hardening in different quenchning mediums przyjętego na konferencje the 1 st International Conference on Reatained Austenite, która odbywa się w ramach the 20 th Heat Treating Society Conference and Exposition October 9-12 2000 St.Louis, Missouri, USA
- Przyłęcka M. Gęstwa W. Modelowanie struktury i własnońści nawęglanych i azotonawęglanych stali chromowo-niklowych konferencja AMT'98 Kraków-Krynica
- zbiorowa Praca Zastosowanie gazów technicznych w procesach obróbki cieplnej, Sympozjum firmy Linde Gaz Polska Sp. z. o.o., 19 Maja 1998 Poznań
- Buslowic N. M. Poloiko F. S. Puti polucenia zadannogo kacestva cementovannogo sloja ν promyslennych elektropecach Met. I Term. Obr. Met. Nr I 1979 52 54
- Diesburg D. E. Eldis G. T. Fracture resistance of various carburized steel Met. Trans. 9A 1978 1561 I 57
- Stanger H. Zoch H.W. Wälzfestigkeit einsatzgehärteter Bauteile HTM 45 1990 4 223 229
- Beumelburg W. Das Verhalten von einsatzgehärten Proben mit vrschiedenen Oberflächenstan, den und Randkohlenstoffgehalten im Umlaufiege -, statischen Biegeunf Schlagbiegeveruch DR.-Ing. Diss. Unoversität Karlsruhe 1974
- Cameron T.B. Diesburg D.E. Kim C. -Fatigue and Overload Fracture of Carburized Steels Journal of Metals 1983 7 37 41
- Wicke D. Berns H. -Der Einflaus des Kernkohlenstoffgehaltes auf festigkeitsverhalten von einsatzgehärten Fiengussproben HTM 33 1978 5 281 286
- Dietrich H. Schmidt W. Zur Problematik der mechnisch-technologischen Prüfung von einsatzgehärteten Stahlen Z. Wirtschftl. Fertigung 79 1984 5 251 259
- Dietrich H. Schmidt W. - Einfluss des Radkohlenstoffgehalts und der Eisatzhartetiefe auf die Zahigkeitseigenschalten einsatzgehärteter Stähle unterschidlicher Kernfestihkeit HTM 40 1985 12 24
- Kopfer G. - Beurteilung des Bruchverhaltens einsatzgehrteter Sthle durch Kenngrssen der Bruchmechanik Dr-Ing. Diss. T. H. Aachen 1980
- Ortmann R. - Ermittlung der dynamischen Bruchzhigkeit einsatzgehrteter Sthle mit der COD-Methode Neue Hutte 18 1973 615 618
- Guljajev A. P. i in - Vlijane veliciny austenitnogo ziarna i temperatury odpuska na chlodnolomkost' stali Met. i Term. Obr. Met. 3 1970 23 27
- Parrish G. Carburizing - Microstructures and Properties December 1999 American Society for Metals International Metals Park, Ohio 44073 0-87170-666-0 247
- Krauss G. Steels: Heat Treatment and Processingprinciples ASM International Materials Park, Ohio44073 0-87170-370-X 500
- Razim C. Restaustenit-zum Kenntnisstand über Ursache und Auswirkungen bei einsatzgehärteten Stählen HTM 40 1985 4 150 165
- Meyzaud Y. Sauzay C. Traitement thermique et austénite résiduelle Traitement Thermique 61-74 1994 33 42
- Denis S. Simon A. Beck G. Estimation of the Effect Stress/Phase Transformation Interaction when Calculating Internal Stress during Martensitic Quenching of Steel Trans. ISIJ 22 1982 504 513
- Priestner R. Glover S.G. Stabilisation Effect in a High Carbon Nickel Steel, Physical Properties of Martensite and Bainite Special report 93 The Iron and Steel Institute 1965 38 42
- Brobst R. P. Erauss G. - The Effect of Austenite Grain Size on Microcracking in Martensite of an Fe-1.22 C Alloy Met. Trans. 5 1974 457 462
- Vinokur B. The Composition of the Solid Solution, Structure and Contact Fatigue of Case Hardened Layer Metall. Trans. V. 24 May 1993 1163 1168
- Woolman J. Mottram R.A. The Mechanical and Physical Properties of the British Stan- dmi En Steels,” Parts II and III, BS 970 - 1955 BISRA, Pergamon Press 1966
- Akhant'ev V.P. Ivlev V.I. The Nature of Troostite in Surface Layers of Steels After Car- burising Met. Sci. Heat Treat. (USSR) 17 2 Feb 1975 180 181
- Kern R.F. Supercarburising Heat Treat. Oct 1986 36 38
- Gyulikhandanov E.L. Khoroshailov V.G. Carburising of Heat Resistant Steels in a Con- trolled Endothermic Atmosphere Met. Sci. Heat Treat.(USSR) 13 8 Aug 1971 650 654
- Wang J. Qia L Zhau J. Formation and Properties of Carburised Case with Spheroidal Carbides 5th International Congress on Heat Treatment of Materials (Budapest) International Federation for the Heat Treatment of Materials (Scientific Society of Mechanical Engineers) 1986 1212 1219
- Geller A.L. Lozhushnik L.G. Contact Fatigue Limit of Carburised 25Kh2GNTA Steel Met. Sci. Heat Treat. (USSR) 6 Plenum Publishing Corp. June 1968 474
- Przyłęcka M. Tbe Effect of Carbon on Utility Properties of Cemented Bearings presented at 5th International Congress on Heat Treatment of Materials (Budapest), International Federation for the Heat Treatment of Materials (Scientific Society of Mechanical Engineers) 1986 1268 1275
- Sheenan J. P. Howes M.A.H. The Effect of Case Carbon Content and Heat Treatment on the Pitting Fatigue of 8620 Steel Society of Automotive Engineers 1972
- Sagaradze V.S. Effect of Heat Treatment on the Properties of High Carbon Alloyed Steels Met. Sci. Heat Treat. (USSR) 12 Dec 1964 720 724
- Stickeis C. A. - Carbide refining Heat Treatment for 52100 Bearing Steel Met. Trans. 5 1974 865 874
- Winokur B. B. i in - Vlijane ostatocnogo austenita na konataktnuju vynoslivost cementujennoj stali Met. i Term. Obr. Met. 11 1978 47 49
- Shaw B.A. Abudaia F.B. Evans J.T. Chracterization of retained austenite in case carburised gears and its influence on fatigue performance Heat Treating proceedings of the 20 th Conference 9-12 October 2000 St.Louis, Missouri, USA 62 69
- Karp J. Ratuszek W. Pofelska I. Problemy zwiÄzane z okreńśleniem austenitu szczÄtkowego metodÄ rentgenowskÄ Metalurgia i odlewnictwo, zeszyt 37 Kraków 1970 89 113
- Senczyk D. Głowacki Z. Barbacki A. Rentgenograficzne okreńślenie ilońści austenitu szczÄtkowego w stali łożyskowej ńH 15, Zeszyty Naukowe Politechniki Poznańskiej, Nr 7(37) Mechanika, Poznań 1996 231 238
- Lampe J. Przygotowanie powierzehni do rentgenograficznego oznaczania austenitu szczÄtkowego, Metałozn[ILLEGIBLE]w[ILLEGIBLE]two i Obróbka Cl[ILLEGIBLE]p[ILLEGIBLE]na, Nr47 Wrzesień-Pańdziemik 1980 16 18
- Karp J. Pofelska-Filip I. Rentgenowska ilońściowa analiza fazowa RIAF austenitu w stalach; Hutnik, Nr 6 Kraków 1979 253 269