Condition Monitoring of Fluid Power Systems: A Survey

Authors

• Jahmy Hindman - John Deere Construction and Forestry Equipment Division
• Richard Burton - Dept. of Mechanical Engineering, University of Saskatchewan
• Greg Schoenau - Dept. of Mechanical Engineering, University of Saskatchewan

Topic

• Fluid power systems
• Research and development

Citation

Also In

References

1. Horgan, M. “Hydraulic Filters Extend Component Life,” Hydraulics & Pneumatics 31 34 July 1993
2. Tessman, R. “Speed is not a Factor in the Contaminant Wear of Hydraulic Pumps” BFPR J., paper 8 1 11 1979
3. Fitch, E. An Encyclopedia of Fluid Contamination Control for Hydraulic Systems Hemisphere Publishing Corp. 1979
4. Fitch, E. “Quantifying the Contaminant Tolerance of hydraulic systems using the “Contaminant Life Index”” Proc of 41 st Conference on Fluid Power 203 212 Chicago April 1986
5. Tessman, R. “Component Contaminant Generation” Proc. Eighth Annual Fluid Power Research Conference paper P74-46 Oct. 1974
6. Tessman, R. Fitch, E. “Field Contaminant Ingression Rates-How Much?” Proc. Eighth Annual Fluid Power Research Conference paper P74-47 Oct. 1974
7. Stecki, J. Schoenau, G. “Application of Simulation and Knowledge Processing in Contamination Control.” Proceedings of SAE 2000
8. Stecki, J. Total Contamination Control Fluid Power Net Publications Melbourne 2000
9. Liu, C. Stecki, J. Dransfield, P. “Dynamic Contamination Control Model for Fluid Contamination.” Proceedings of Intl. Conf. on Fluid Power Control and Robotics 342 347 Chengdu, China 1990
10. Stecki, J. Liu, C. “Modelling and Simulation of Contamination in Fluid Power Control Systems,” The Fourth Scandinavian International Conference on Fluid Power, SICFP'95 Tampere 356 368 1995
11. Jensen, Jens P. The Distribution of Contaminants Through a Hydraulic Circuit The University of Science and Technology Trondheim 1996
12. Svedberg, G. “Using automatic particle counters on-line - Extremely low contamination levels can be detected,” Proc. 4 th International Conference on Fluid Power Tampere, Finland 759 774
13. Rinkinen, J. Kiiso, T. “Using portable particle counter in oil system contamination control,” Proc. 3 rd Scandinavian Conference Linköping 1993
14. Sommer, H. 1999 “Contamination Sensor”
15. Qisheng, Z. Jingyi, Z. Shuli, L. “Study on an online monitoring method of oil contamination.” Proc. of the 5 th International Conference on Fluid Power Transmission and Control 493 495 2001
16. Park, K Nassar, M. 1997 “Capacitive oil deterioration and contamination sensor”
17. Bauer, R. Hirthe, R. Polczynski, M. Seitz, M. Hansen, J. 1998 “Fluid condition monitor”
18. McAdoo, J. Catoe W. Bollen, M. Folen, V. Volkening, F. 1996 “Lubricating fluid condition monitor”
19. Isermann, R. “Process Fault Detection based on Modeling the Estimation Methods: A Survey” Automatica 20 387 404 1984
20. Isermann, R. “Fault Diagnosis of Machines via Parameter Estimation and Knowledge Processing-Tutorial Paper” Automatica 29 815 835 1993
21. Ljung, L. Söderström, T. Theory and Practice of Recursive Identification Cambridge, Massachusetts MIT Press 1983
22. Kalman, R. “A New Approach to Linear Filtering and Prediction Problems,” Transactions of the ASME - Journal of Basic Engineering 35 45 1960
23. Kalman, R. Bucy, R. 1960 “New Results in Linear Filtering and Prediction Theory,” Transactions of the ASME - Journal of Basic Engineering 95 108
24. Welch, G. Bishop G. 2000 “An Introduction to the Kalman Filter,” Department of Computer Science, University of North Carolina Chapel Hill http://www.cs.unc.edu/∼welch/kalman/kalmanIntro.html
25. Julier, S. Uhlman, J. Durrant-Whyte, H.F. “A New Approach for Filtering Nonlinear Systems.” Proceedings of the 1995 American Control Conference Seattle, Washington 1628 1632 http://www.robots.ox.ac.uk/∼siju/work/publications/letter_size/ACC95_pr.zip
26. Cao, H. “Parameter Estimation Using Extended Kalman Filter for the Swash Plate Assembly and the Control Piston in a Load Sensing Pump.” University of Saskatchewan 2001
27. Khoshzaban-Zavarehi, M. “On-Line Condition Monitoring and Fault Diagnosis in Hydraulic System Components Using Parameter Estimation and Pattern Classification.” University of British Columbia 1997
28. Wright, G. “Parameter Estimation of a Hydraulic Proportional Valve Using Extended Kalman Filtering.” University of Saskatchewan 2001
29. Widrow, B. Lehr, M. “30 Years of Adaptive Neural Networks: Perceptron, Madaline, and Backpropagation.” 1990 Proceedings of the IEEE 78 9 1415 1441
30. Rosenblatt, F. “The perceptron: A probabalistic model for information storage and organization in the brain.” 1958 Psychological Review 65 386 408
31. Rumelhart, D. Hinton, D. Williams, R. “Learning representation by backpropagating errors.” 1986 Nature 323 9 533 536
32. Werbos, P. “Backpropagation Through Time: What It Does and How to Do It.” 1990 Proceedings of the IEEE 78 10 1550 1560
33. Rosa, A. “Estimating Parameters of a Proportional Solenoid Valve using Neural Neworks.” University of Saskatchewan 2001
34. Ansarian, A. “Parameter Estimation of a Proportional Solenoid Valve Using Ordinary Least Squares and Maximum Liklihood Techniques.” University of Saskatchewan 2001
35. Lu, F. Burton, R. Schoenau, G. “Feasibility study on the use of a neural network to detect and locate excess piston wear in an axial piston pump.” Innovations in Fluid Power, 7 th Bath International Fluid Power Workshop 25 40 1994
36. Le, T. Watton, J. Pham, D. “An artificial neural network based approach to fault diagnosis and classification of fluid power systems.” Proc Instn Mech Engrs 211 307 317 1997
37. Crowther, W. Edge, K. Burrows, C. Atkinson, R. Woollons, D. “Fault diagnosis of a hydraulic actuator circuit using neural networks-an output vector space classification approach.” 1998 Proc Instn Mech Engrs 212 57 69
38. Mourre, D. Burton, R. “Investigation of a neural network/statistical condition monitoring technique for a proportional solenoid valve.” Power Transmission and Motion Control University of Bath 2001
39. Daley, S. Wang, H. “On the application of neural networks to the monitoring of a simulated hydraulic rotary drive system.” 6 th Bath International Fluid Power Workshop University of Bath 1993
40. Yu, D. Shields, D. Mahtani, J. “A non-linear fault detection method for a hydraulic system.” IEE Conference Publication 389 1318 1322 March 1994
41. Daley, S. Wang, H. “Fault Diagnosis in Fluid Power Systems.” Engineering Simulation 13 993 1008 1996
42. Bailey, S. Watton, J. “Progress of the on-line monitoring of the hydraulic systems of a hot steel strip rolling mill.” Proc. of 1 st FPNI-PhD Symposium Hamburg, Germany 203 213 2000
43. Smith, S. The Scientists and Engineer's Guide to Digital Signal Processing Second 1999 California Technical Publishing
44. Oppenheim, A. Schafer, R. Digital Signal Processing Prentice-Hall Inc. 1975
45. Cooley, J. Tukey, J. “An Algorithm for the Machine Computation of Complex Fourier Series.” Mathematics Computation 19 297 301 April 1965
46. Ramdén, T. “On Condition Monitoring of Fluid Power Pumps and Systems.” Linköping Studies in Science and Technology Linköping, Sweden 1995
47. Bogert, B. Healy, J. Tukey, J. “The Quefrency Alanysis of Time Series for Echoes: Cepstrum, Pseudo-autocovariance, Cross-Cepstrum and Saphe Cracking,” 1963 Proc. Symp. Time Series Analysis Rosenblatt M. New York John Wiley & Sons, Inc. 209 243
48. Yunbo, H. Lim, G. Chua, P. Tan, A. “Monitoring the Condition of Loaded Modern Water Hydraulic Axial Piston Motor and Cylinder.” Proceedings of the Fifth International Conference on Fluid Power Transmission and Control 447 451 Hangzhou, China 2001
49. Parrondo, J. Velarde, S. Santolaria, C. “Development of a predictive maintenance system for a centrifugal pump.” Journal of Quality in Maintenance Engineering 4 3 198 211 1998
50. Seifert, T. Steele, J. “Fuzzy Logic Processing and Dynamic Alarm Handling for Real-Time Machine Health Monitoring.” Proceedings of the 1996 Artificial Neural Networks In Engineering (ANNIE) Conference 6 231 236 1996
51. Angeli, C. “An Online Expert System for Fault Diagnosis in Hydraulic Systems.” Expert Systems 16 2 115 120 1999
52. Hong, T. Fitch, E. “Model of Fuzzy Logic Expert System for Real-Time Condition Control of a Hydraulic System.” Proc. 3 rd Intl. Conf on Machine Condition Monitoring Windsor, U.K. 1990
53. Creber, D. “An Expert System approach to on-line fault diagnosis of fluid power motor drive systems.” Cardiff University U.K. 1993
54. Gale, K. Watton, J. “A real time expert system for the condition monitoring of hydraulic control systems in a hot steel strip finishing mill.” Proc Instn Mech Engrs 213 359 374 1999

Cited By