This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Using Superposition to Calculate Critical Location Stress, Strain and Life in Vehicular Transmission Shafts of Complex Geometry Subjected to Bending and Torsion
Technical Paper
2002-01-1302
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
A procedure for the computation of fatigue life of shafts subjected to variable amplitude independent bending and torsion loading is described. The elastic superposition technique, followed by a Neuber plasticity correction, also allows for the initial and possibly cyclic plasticity dependent residual stress states caused by induction hardening or other surface altering processing effects. The present study documents the formation and alteration of residual stresses caused by initial induction hardening and followed by a straightening process. Sample calculations are presented for two critical finite elements of a prototype shaft, and lives are predicted using a traditional equivalent axial stress and by a new procedure that searches for and computes lives at critical angles.
Recommended Content
Authors
Citation
Conle, F., Chernenkoff, R., Zhang, Y., Chu, C. et al., "Using Superposition to Calculate Critical Location Stress, Strain and Life in Vehicular Transmission Shafts of Complex Geometry Subjected to Bending and Torsion," SAE Technical Paper 2002-01-1302, 2002, https://doi.org/10.4271/2002-01-1302.Also In
References
- Fash, J.W. Lund R.A. Pountney R. White K. “Enhancing the design and development cycle through computer integrated engineering for durability,” SAE Conf. on Durability by Design, SAE SP-730, 1987, paper 871942
- Conle, F.A. Mousseau C.W. “Using vehicle dynamics simulations and finite-element results to generate fatigue life contours for chassis components,” Int.J.Fatigue 13 3 1991 195 205
- Agrawal, H. et al. “Upfront Durability Analysis for Automotive Sheet Metal Structures,” SAE paper 1996
- Boller, CHR Seeger T. “Materials Data for Cyclic Loading,” 0-444-42875-5 Elsevier 1987
- SAE J1099 Standard, SAE Handbook 2000 3.150
- “Fatigue Design & Evaluation Committee Fatigue Properties HTML Database: U.of Waterloo Site,” http://fde.uwaterloo.ca/Fde/Materials/dindex.html.
- Landgraf, R.W. Richman R.H. “Fatigue Behavior of Carburized Steel,” ASTM STP 569 1975 130 144
- Landgraf, R.W. Chernenkoff R.A. “Residual Stress Effects on Fatigue of Surface Processed Steels,” ASTM STP 1004 1988 1 12
- Britten, A. “Fatigue Life Calculation of Surface-Strengthened Components based on Finite Element (FE) Results: Application of the Local Strain Approach on a Two Layer Model,” VDI Berichte Nr. 1153 1994 61 72
- Meyer, C. Personal Communication, Ford Automatic Transm New Products Center Sept. 2000
- Ishii, K. Iwamoto M. Shiraiwa T. Sakamoto Y. “Residual Stress in the Induction Hardened Surface of Steel,” SAE Paper No. 690472 1969
- Motoyama, M. “Residual Stress and Fatigue Strength of Carburized and Quenched Steel SAE paper No. 760716 1976
- Ericsson, T. “Residual Stresses and Fatigue in Steel,” Inst. of Tech., Dept. of Mech.Eng. S-581 83 Linkoeping Sweden 1977
- Kobayashi, M. Matsui T. Murakami Y. “Mechanism of creation of compressive residual stress by shot peening,” Int.J.Fatigue 20 5 351 357 1998
- Jenkin, C.F. “Fatigue in Metals,” The Engineer Dec. 8 1922 612 614
- Masing, G. “Eigenspannungen und Verfestigung bei Messing,” Proc. of 2nd Inter. Cong. for Applied Mech. Zurich 1926
- Jhansale, H.R. “A New parameter for the Hysteretic Stress-Strain Behavior of Metals,” ASME J. of Eng. Matls. & Techn. 97 Jan. 1975 33 38
- Whipple, J. Personal Communication, Ford Automatic Transm New Products Center 1999
- “Multiaxial Fatigue of an Induction Hardened Shaft,” Cordes T. Lease K. SAE AE-28 1999 0-7680-0528-0
- Yeung, Y.S. “Implementation of a Cyclic Plasticity Model in ABAQUS,” Nov. 2000 ABAQUS User Meeting presentation
- Ochsner, J.K. Klann D.A. “Estimation of Residual Stresses Using Elastic Finite Element Analysis,” SAE AE-28 1999 0-7680-0528-0
- Yeung, Y.S. Chu C.-C. “Modeling the Creation and Changes in the Residual Stresses of a Transmission Shaft,” Int.J.Fatigue Spring 2001
- Pineault, J. PROTO Manuf. Ltd, Windsor Ont. Canada
- Topper, T.H. Wetzel R.M. Morrow J. “Neuber's Rule Applied to Fatigue of Notched Specimens,” ASTM J. of Matls. 4 1 March 1969
- Chu C.-C. Hubner A.
- Conle, F.A. Landgraf R.W. “A Fatigue Analysis Program for Ground Vehicle Components,” Proc. SEECO'83 Int. Conf. on Digital Techniques in Fatigue Soc. of Env. Engrs. London 1983 1 28
- Fash, J.W. Conle F.A. Minter G.L. “Analysis of Irregular Loading Histories for the SAE Biaxial Fatigue Program,” Chapter 3 SAE AE-14: Multiaxial Fatigue 33 57 1989
- http://fde.uwaterloo.ca/Fde/Materials/Steel/SAE1045/sae_1045_563BHN.html
- http://fde.uwaterloo.ca/Fde/Materials/Steel/SAE1045/sae_1045_203BHN.html