This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Numerical Analysis of Hydrocarbon Adsorption and Desorption Behavior on NOx Selective Reduction Catalysts Using Supplemental Hydrocarbon under Diesel Transient Condition
Technical Paper
2002-01-0953
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
NOx reduction was estimated on various axial distributions of precious metal through a catalyst based on a numerical model of diesel NOx selective reduction by HC which takes into account the adsorption and desorption of HC. We had a qualitative agreement with the experimental results. We can obtain the behavior of distributions of adsorbed HC amount by our calculations, which we hardly obtain by experiments. This is a very useful information for a design of HC-SCR systems. We have developed a new method of optimization of diesel selective NOx reduction systems with a supplemental HC to improve the efficiency of HC-SCR.
Recommended Content
Technical Paper | Modeling of Hydrocarbon Trap Systems |
Technical Paper | In-line Hydro Carbon Adsorber |
Technical Paper | A Computational and Experimental Analysis for Optimization of Cell Shape in High Performance Catalytic Converters |
Authors
Citation
Watanabe, Y., Ueda, M., Sugiura, M., and Harada, Y., "Numerical Analysis of Hydrocarbon Adsorption and Desorption Behavior on NOx Selective Reduction Catalysts Using Supplemental Hydrocarbon under Diesel Transient Condition," SAE Technical Paper 2002-01-0953, 2002, https://doi.org/10.4271/2002-01-0953.Also In
Diesel Exhaust Emissions Control 2002: SCR, HC De-NOx, and Measurement
Number: SP-1674; Published: 2002-03-04
Number: SP-1674; Published: 2002-03-04
References
- Ansell G.P. Bennett P.S. Cox J.P. Frost J.C. Gray P.G. Jones A.-M. Rajaram R.R. Walker A.P. Litorell M. Smedler G. “The Development of a Model Capable of Predicting Diesel Lean NOx Catalyst Performance under Transient Conditions” Appl. Catal. B 10 1996 183
- Watanabe Y. Asano A. Kondo T. Sakakibara Y. Sugiura M. “Development of a model for the lean NOx catalytic reaction with hydrocarbon adsorption and desorption” Appl. Catal. B 31 2001 221
- Oh S.H. Cavendish J.C. “Transients of Monolithic Catalytic Converters: Response to Step Change in Feedstream Temperature as Related to Controlling Automobile Emissions” Ind. Eng. Chem. Prod. Res. Dev. 21 1982 29
- Koltsakis G.C. Konstantinidis P.A. Stamatelos A.M. “Development and application range of mathematical models for 3-way catalytic converters” Appl. Catal. B 12 1997 161
- Chan S.H. Hoang D.L. “Modeling of Catalytic Conversion of CO/HC In Gasoline Exhaust at Engine Cold-Start” SAE paper 1999-01-0452 1999
- Shayler P.J. Hayden D.J. Ma T. “Exhaust System Heat Transfer and Catalytic Converter Performance” SAE paper 1999-01-0453 1999
- Balenovic M. Hoebink J.H.B.J. Backx A.C.P.M. Nievergeld A.J.L. “Modeling of an Automotive Exhaust Gas Converter at Low Temperature Aiming at Control Application” SAE paper 1999-01-3623 1999
- Braun J. Hauber T. Tëbben H. Zacke P. Chatterjee D. Deutschmann O. Warnatz J. “Influence of Physical and Chemical Parameters on the Conversion Rate of a Catalytic Converter: A Numerical Simulation Study” SAE paper 2000-01-0211 2000
- Baba N. Ohsawa K. Sugiura S. “Numerical Approach for Improving the Conversion Characteristics of Exhaust Catalysts Under Warming-up Condition” SAE paper 962076 1996
- Stamatelos A.M. Koltsakis G.C. Kandylas I.P. Pontikakis G.N. “Computer-Aided Engineering in the Development of Diesel Exhaust After-treatment Systems” SAE paper 1999-01-0458 1999
- Bunimovich G.A. Strots V.O. Matros Y.S. Mirosh E.A. “Reversed Flow Converter: Fundamentals of the Design” SAE paper 1999-01-0459 1999
- Vortuba J. Mikus O. Nguen Khue Hlavacek V. Skrivanek J. “Heat and Mass Transfer in Honeycomb Catalysts II” Chem.Eng. Sci. 30 201 1975
- Watanabe Y. Asano A. Banno K. Yokota K. Sugiura M. “Application of numerical modeling of selective NOx reduction by hydrocarbon under diesel transient conditions in consideration of hydrocarbon adsorption an desorption process” Catalysis Today 69 1-4 209 2001
- Ueda M. Asano A. Kondo T. Watanabe Y. Fukuma T. Harada Y. “Optimization of Diesel Engine Aftertreatment System with a model of Hydrocarbon Selective Reduction (HC-SCR) and Evolutionary Programming” SAE paper 2002-01-954 2002