This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Virtual Environment for Aesthetic Quality Assessment of Flexible Assemblies in the Automotive Design Process
Technical Paper
2002-01-0464
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This paper reports on recent work undertaken to study the use of virtual environments for the prediction and assessment of aesthetic quality within the automobile industry. This paper builds on previously reported work and focuses on the recent development and evaluation of two new simulation modules that extend an existing system to facilitate the visualisation of non-nominal product variants. The case study for this work involves the aesthetic assessment of a glove box assembly within a typical automotive instrument panel that is composed of both rigid and flexible components. The paper provides an overview of the existing system and the new simulation modules that have been developed.
Recommended Content
Technical Paper | Reliability of Pressure Measurement on Car Seats |
Technical Paper | Development on Rapid Assembly System of Crash Safety CAE Modeling |
Journal Article | Using Designing for Human Variability to optimize Aircraft eat Layout |
Authors
- John Maxfield - Informatics Research Institute, University of Leeds, UK
- Peter M Dew - Informatics Research Institute, University of Leeds, UK
- Jeff Zhao - Informatics Research Institute, University of Leeds, UK
- Neal Juster - DMEM, University of Strathclyde, UK
- Martin Fitchie - DMEM, University of Strathclyde, UK
Topic
Citation
Maxfield, J., Dew, P., Zhao, J., Juster, N. et al., "A Virtual Environment for Aesthetic Quality Assessment of Flexible Assemblies in the Automotive Design Process," SAE Technical Paper 2002-01-0464, 2002, https://doi.org/10.4271/2002-01-0464.Also In
Foresight Vehicle Technology: Consumer Driven Design, Manufacturing, Supply Chain, and Purchasing
Number: SP-1694; Published: 2002-03-04
Number: SP-1694; Published: 2002-03-04
References
- Barr A.H. Global and local deformation of solid primitives Proc. SIGGRAPH'84, Computer Graphics 18 3 21 30
- Sederberg, T.W. Parry S.R. Free form deformation of polygonal data Proceedings, International Electronic Image Week Nice, France April 1986 633 639
- Sederberg, T.W. Parry, S.R. Free form deformation of solid geometric models Computer Graphics (SIGGRAPH'86 Proc.) 1986 20 4 151 160
- Comninos Peter P. Fast bends or fast free-form defomation of polyhedral data Computer Graphics 89 Middx, UK 1989 225 241
- Henry J.L. Warren N.W. NURBS-Based Free Form deformations IEEE Computer Graphics and Applications 1994 59 65
- Schek H. J. The force density method for form finding and computation of general networks Computer Methods in Applied Mechanical Engineering 3 1974 115 134
- Leon J.C. Trompette P. A new approach towards free-form surfaces control Computer Aided Geometric Design 1995 12 395 416
- Leon J.C. Veron P. Semi-global deformation and correction of free-form surfaces using a mechanical alternative The Virtual Computer 1997 13 109 126
- Guillet S. Leon J.C. Parametrically deformed free-form surfaces as part of a variational model Computer Aided Design 30 8 1998 621 630
- Jayaram S. Wang Y. Jayaram U. Lyons K. Hart P. A Virtual Assembly Design Environment Proceedings of IEEE Virtual Reality 99 Houston, Texas, USA March 1999
- Kuehne R. Oliver J. A Virtual Environment for Interactive Assembly Planning and Evaluation Proceedings of Workshop on Simulation and Interaction in Virtual Environments (SIVE '95) The University of Iowa July 13-15 1995
- Baylis G. M. Bowyer A Taylor R. I. Willis P. J. Virtual Manufacturing Proceedings of CSG '94 Winchester, UK April 1994 Session: Set-theoretic Solid Modelling: Techniques and Applications 353 365
- Beier, K. P. Virtual Reality in Automotive Design and Manufacturing Proceedings of Convergence '94, International Congress on Transportation Electronics, SAE (Society of Automotive Engineers) Dearborn, Michigan October 1994
- Srinivasan H. Figueroa R. Gadh R. Selective Disassembly for Virtual Prototyping as Applied to De-Manufacturing Journal of Robotics and Computer Integrated Manufacturing 15 3 231 245 1999
- Wilson J. R. Brown D. J. Cobb S. V. D'Cruz M. M. Eastgate R. M. Manufacturing Operations in Virtual Environments (MOVE) Presence 4 3 1995 306 317
- Maxfield J. H. Dew P. M Zhao J. Juster N. P. Taylor S. Fitchie M. Ion W. J. Predicting Product Cosmetic Quality in the Automobile Industry Proceedings of the 33 rd International Symposium on Automotive Technology and Automation (ISATA 2000) September 25-29 2000 Dublin, Ireland
- Juster N. P. Maxfield J. H. Dew P. M. Taylor S. Fitchie M. Ion W. J. Zhao J. Thompson M. R. Predicting Product Aesthetic Quality using Virtual Environments Transactions of the ASME, Journal of Computing and Information Science in Engineering 1 2 June 2001 1530-9827
- Thompson M. Maxfield J. Dew P.M. Interactive Virtual Prototyping Proceedings of Eurographics UK '98 107 120 March 1998
- http://www.vsp.co.uk/tenants/vital