This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Quality, QFD and Control Charts: A Managerial Assessment During the Product Development and Production Process
Technical Paper
2001-01-3365
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Quality Engineering looks at designing Quality into every product and all the processes. Design is surely the most important phase for Quality both of products and processes. Quality Function Deployment (QFD) and Taguchi Methods were both originated in Japan and is claimed as very important for Quality design. They are usually considered synergical for the development of products and processes. Are they good?
Productivity improves as the quality of the process moves upwards. The Japanese learned in 1950 that this can be achieved if the process is in control. Economic manufacturing requires quality control and improvement and, consequently, the use of “Quality tools” such as Statistical Process Control, Control Charts, and DOE. The paper will consider show that an incompetent approach to Quality, and to Quality Methods, can do more harm than good.
Recommended Content
| Aerospace Standard | Electronic Interchange of Configuration Management Data |
| Technical Paper | Predicting Remaining Lifetime of Transmission Gears |
| Technical Paper | Fault Identification of Assembly Processes Using Fuzzy Set Theory |
Authors
Citation
Galetto, F., "Quality, QFD and Control Charts: A Managerial Assessment During the Product Development and Production Process," SAE Technical Paper 2001-01-3365, 2001, https://doi.org/10.4271/2001-01-3365.Also In
References
- COLOSIMO, SEMERARO 1999 Economic Design of a Bayesian Adaptive Control Chart for Nonconfornities 3rd AITEM 99 Brescia
- DEMING W.E. 1986 Out of the crisis Cambridge Press
- DEMING W.E. 1997 The new economics for industry, government, education Cambridge Press
- ERTO P 1982 New practical Bayes estimator for Weibull IEEE Trans. Reliability, R-31
- GALETTO F. 1978 An application of experimental design in the Automotive field SIA Congress
- GALETTO F. 1984 Assessment of Product Reliability World Quality Congress ‘84 Brighton
- GALETTO F. 1986 Quality/Reliability: How to get results EOQC (Automotive Section) Madrid
- GALETTO F. 1986 Pitfalls of Bayes Methods Int. Conf. on Reliability/Diagnostics Turin
- GALETTO F. 1987 Quality and Reliability, the Iveco way Mgt Dev. Review by MCE Brussells
- GALETTO F. 1987 Are Bayes’ Methods really better? IASTED Conf. on Rel. & Quality Control Paris
- GALETTO F. 1988 Quality and reliability. A must for industry ISATA Montecarlo
- GALETTO F. 1989 Quality of methods for quality is important EOQC Conference Vienna
- GALETTO F. 1990 Basic and managerial concerns on Taguchi Methods ISATA Florence
- GALETTO F. LEVI R. (93) Planned Experiments: key factors for product Quality 3rd AMST 93 Udine
- GALETTO F. 1993 DOE. Importanti idee sulla Qualità per i manager DEINDE Torino
- GALETTO F. 1995 Affidabilità, Volume 1: Teoria e Metodi di Calcolo Padova
- GALETTO F. 1995 Affidabilità, Volume 2: Prove di affidabilità
- GALETTO F. 1996 Managerial Issues for Design of Experiments 4th AMST 96 Udine
- GALETTO F. 1997 We need Quality of Managers Quality 97 6th Int. Conf. Ostrava
- GALETTO F. 2001 Qualità. Alcuni metodi statistici da Manager
- GALETTO F. 1998 Quality Education on Quality for Future Managers 1st Conference on TQM for Higher Education Institutions Tolone
- GALETTO F. 1999 GIQA, the Golden Integral Quality Approach: from Management of Quality to Quality of Management Total Quality Management 10 1
- GALETTO F. 1999 Quality Methods for Design of Experiments 5th AMST 99 Udine
- GALETTO F. 1999 Quality Function Deployment, Some Managerial Concerns AITEM99 Brescia
- GALETTO F. GENTILI E. 1999 The need of Quality Methods used for Quality CAPE ‘99 Durham, UK
- GALETTO F. GENTILI E. 1999 Quality of the Quality Methods AITEM 99 Conference Brescia
- GALETTO F. 1999 Quality Education on Total Quality Management 2nd Conf. on TQM for HEI Verona
- GALETTO F. GENTILI E. 2000 In search of Quality in QFD and Taguchi methods CAPE
- MONTGOMERY D.C. 1996 Introduction to Statistical Quality Control Wiley & Sons wrong definition of “quality” many other drawbacks
- SHEWHART W.A. 1931 Economic Control of Quality of Manufactured Products Van Nostrand
- SHEWHART W.A. 1936 Statistical Method from the Viewpoint of Quality Control Washington
- WATZLAWITCK P. 1976 La realtà della realtà Astrolabio, Roma
- WHEELER D.J. CHAMBERS D.S. 1992 Understanding Statistical Process Control SPC Press
- YIN G.Z. JILLIE D.W. 1987 Orthogonal Design for Process Optimisation and its Application in Plasma Etching Solid State Technology may 87
- Eureka, W. Ryan N. E. The Customer driven Company: Managerial Perspectives on QFD ASI Press 1989