This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Comparative Study on the Performance of Ventilated Brake Discs Manufactured in Different Advanced Materials
Technical Paper
2001-01-3325
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Two different aluminium alloy materials have been used to produce ventilated brake discs, on one hand, AS17G0.6 hypereutectic alloy and on the other hand, AS7G0.6 reinforced with 20% in wt. of SiC particles. The casting production technique used has been Low Pressure Casting (LPC) and some of the brake discs have been heat treated using a T6 treatment. Once the ventilated brake discs were produced and machined, they were tested in a dynamometer in order to compare the performance under service conditions of the aluminum alloy and grey cast iron (GCI) discs currently used in the market.
Recommended Content
Technical Paper | Cast Iron Brake Discs - Current Position, Performance and Future Trends in Europe |
Ground Vehicle Standard | Automotive Compacted Graphite Iron Castings |
Technical Paper | EZAC™ - A Novel High Strength, Creep Resistant, Hot Chamber Zinc Die Casting Alloy |
Authors
- J. Goñi - Fundación INASMET, Mikeletegi Pasealekua 2, Parque Tecnológico
- I. Mitxelena - Fundación INASMET, Mikeletegi Pasealekua 2, Parque Tecnológico
- A. Rubio - Fundación INASMET, Mikeletegi Pasealekua 2, Parque Tecnológico
- J. Coleto - Fundación INASMET, Mikeletegi Pasealekua 2, Parque Tecnológico
- A. Terrón - Fundación INASMET, Mikeletegi Pasealekua 2, Parque Tecnológico
- A. García - Instituto Universitario de investigación del Automóvil, E.T.S.I., Campus Sur U.P.M., Ctra. de Valencia Km.7
- J. Sánchez - Instituto Universitario de investigación del Automóvil, E.T.S.I., Campus Sur U.P.M., Ctra. de Valencia Km.7
Topic
Citation
Goñi, J., Mitxelena, I., Rubio, A., Coleto, J. et al., "A Comparative Study on the Performance of Ventilated Brake Discs Manufactured in Different Advanced Materials," SAE Technical Paper 2001-01-3325, 2001, https://doi.org/10.4271/2001-01-3325.Also In
References
- Ashby M.F. Jones D.R.H. “Engineering Materials 1. An introduction to their properties and applications” International Series on Materials Science and Technology 34 1980
- Booth G.N. “Optimization of Casting Design: A Captive Casting Producers Perspective” Proceedings of 60 th World Foundry Cogress The Hague, Netherlands 1993 CIATF 1993 10 20
- Allison J.E. Cole G.S. “Metal Matrix Composites in the Automotive Industry” JOM January 1993 19
- Bardi U. Scrivani A. Bertini S. Lacroix O. Bignocolo R. Ceraolo G. Di Bona D. “Towards more efficient and cleaner vehicles in Europe: policy questions and technological answer” Proceedings of the HTCES2000 Conference Modena May 2000
- Standard Regulation Number 13 th
- Standard Regulation Number 90R1
- Vera C. Aparicio F. Universidad Politécnica de Madrid 1995
- VV.AA. “Brake Technology and ABS/TCS Systems” SAE /SP-99/1413
- VV.AA. “Braking of Road Vehicles” Mechanical Engineering Publicatios Limited 1993