This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Testing Control Systems of Trucks and Truck-Trailer-Combinations With Hardware In The Loop – Very Real Tests In a Virtual World
Technical Paper
2001-01-2768
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
This article presents state-of-the art of modern hardware-in-the-loop systems for testing electronic chassis control systems in trucks and in truck/trailer combinations. In the last few years, hardware-in-the-loop has proven to be a time and cost-saving testing method for passenger cars, ideally complementing real driving tests. Due to the increasing functionality and complexity of chassis control systems in trucks, HIL will certainly prove to be a key technology for testing control systems of trucks.
Recommended Content
Citation
Riedel, A. and Schmidt, A., "Testing Control Systems of Trucks and Truck-Trailer-Combinations With Hardware In The Loop – Very Real Tests In a Virtual World," SAE Technical Paper 2001-01-2768, 2001, https://doi.org/10.4271/2001-01-2768.Also In
References
- Palkovics, L. Fries, A. “Intelligent Electronic Systems in Commercial Vehicles for Enhanced Traffic Safety” Vehicle System Dynamics 35 4–5 2001
- Schmidt, A. Gnadler, R. “Economical and Technical Aspects Using Realtime Simulation of Trucks with Hardware in the Loop” SAE Technical Paper Series No. 942298
- Winterkorn, M. “Product development requirements in the Automotive industry” Proceedings of the AVL Congress “Engine and Environment” Graz, Austria September 2000
- Winterkorn, M. “Challenges facing automotive product development” AutoTechnology 1 February 2001
- Riedel, A. “Opel setzt auf Simulation” September 2000
- Goroncy, J. “Glatteis im Sommer” Automobil Industrie 46 March 2001
- Pfister, F. Reitze, C. Schmidt, A. “Hardware in the Loop – The Technologie for Development and Test of Vehicle Control Systems” Proceedings of the “Congrès International – La Dynamique du Véhicule Automobile et Ferroviaire” Lyon, France June 1999
- Göhring, E. von Glasner, E.-C. Povel, R. Wüst, K. “Factors Influencing the Driving Performance of Light Commercial Vehicles While Braking in a Turn” Proceedings of the 4th International EAEC Conference VEHICLE AND TRAFFIC SYSTEMS TECHNOLOGY Strasbourg, France June 16–18 1993
- Göhring, E. von Glasner, E.-C. Povel, R. Wüst, K. “Driving Performance of a Commercial Vehicle With Adaptive Suspensions” Proceedings of the 7th International Pacific Conference and Exposition on Automotive Engineering Phoenix, Arizona, USA November 15–19 1993 931970
- Wüst, K. Schmidt, E. “Fahrwerkssimulation am Bild-schirm” Automotive Engineering Partners June 2001
- Riedel, A. “Die Straße ins Labor geholt” April 2000
- Weilacher, V. “Fahren auf virtuellen Straßen: Hardware-in-the-Loop Simulation” October 2000
- Schmidt, A. “MESA VERDE Generation and Application of Complete Simulation Models for Multibody Systems” Vehicle System Dynamics 22 1993
- Detalle, S. Duverly, L. Rousset, J.-M. Weber, B “Automatic Equation Generation for Real-Time Dynamic Vehicle Models on SARA Project” Proceedings of the Driving Simulation Conference Sophia Antipolis, France September 1995
- van Oosten, J.J.M. Unrau, H.-J. Riedel, A. Bakker, E. “TYDEX Workshop: Standardisation of Data Exchange in Tyre Testing and Tyre Modelling” Proceedings of the 2nd International Colloquium on Tyre Models for Vehicle Dynamic Analysis Berlin, Germany February 20 – 21 1997
- van Oosten, J. Savi, C. Augustin, M. Bouhet, O. Sommer, J. Colinot, J.-P. “TIME Tire Measurements Forces & Moments: A New Standard for Steady State Cornering Tyre Testing” Proceedings of the EAEC Conference 1999 Barcelona, Spain June 30 – July 2, 1999
- Riedel, A. “A Model of the Real Driver for Use in Vehicle Dynamics Simulation Models” Proceedings of the XXIII. Fisita Congress “The Promise of New Technology in the Automotive Industry” Torino, Italy May 1990
- Riedel, A. “Driver modeling in ADAMS” Proceedings of the10th European ADAMS User Conference Frankfurt November 14–15 1995
- Riedel, A. Wurster, U “Fahrermodelle in der Praxis” Automotive Engineering Partners September 1998
- Tempest, J. Guttilla, M. Wurster U. “Full Lap Simulation of a Formula 1 Car” Proceedings of the11th European ADAMS User’s Conference Frankfurt November 19–20 1996
- Hönlinger, M. Glauch, U. “Mobility Analysis of Heavy Wheeled Off-Road Vehicles with ADAMS/CAR” Proceedings of the 13th European ADAMS Users’ Conference Paris, France November 18–19 1998