This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Two-Dimensional External Aerodynamics Tool (EAT) for Simulating Airflow around Tractor-Trailer Combinations
Technical Paper
2001-01-2743
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Understanding external vehicle aerodynamics is an integral step in reducing overall vehicle fuel consumption. This is particularly true for long-haul commercial vehicles where an incremental decrease in drag can translate into significant fuel savings based on the number of miles traveled over the course of a truck's working life. The ability to critically analyze the air motion adjacent to commercial vehicles is a step toward understanding the overall affects of external aerodynamics on the entire vehicle. To achieve this understanding, the aerodynamics problem must be divided into manageable tasks that can each yield qualitative and quantitative results.
A two-dimensional (2D) External Aerodynamics Tool (EAT) has been developed that enables computational fluid dynamics (CFD) simulations of commercial vehicles to be performed quickly and easily. The approach is significantly automated and uses tools of ICEM CFD Engineering and FLUENT™ as well as a highly customized user interface to produce fully quadrilateral grids and CFD solutions from the original CATIA™ CAD data. The simulations are based on centerline cross-sections of entire tractor-trailer combinations. Although the complete vehicle is included in the simulation, the CFD results are meant to guide the design of grill bars, sun-visors and profiles of hoods, windshields and roofs. EAT is intended to enable designers to make informed design decisions based on aerodynamic performance while taking into account styling considerations. This leads to shorter design cycles and minimizes prototype costs through reducing the necessary number of design variations to be tested through more in-depth methods such as three-dimensional CFD analysis or wind tunnel testing. A validation of EAT has been performed through a series of simulations of an NACA 4415 airfoil as well as a sun-visor similar to the Freightliner Century Class production sun-visor. Finally, a brief description of the application of EAT within a sun-visor pre-optimization design study is presented.
Recommended Content
Authors
Topic
Citation
McLandress, A., Wiese, W., Turney, J., and Loczi, J., "A Two-Dimensional External Aerodynamics Tool (EAT) for Simulating Airflow around Tractor-Trailer Combinations," SAE Technical Paper 2001-01-2743, 2001, https://doi.org/10.4271/2001-01-2743.Also In
References
- Bradley, R. Technology Roadmap for the 21 st Century Truck Program, A Government-Industry Research Partnership Department of Energy December 2000
- Cresswell, M.G.L. Hertz, P.B. “Aerodynamic Drag Implications of Exterior Truck Mirrors,” SAE Paper 920204 1992
- Hucho, W.H. Aerodynamics of Road Vehicles Fourth Edition Warrendale, Pa SAE International 1998
- Roy, S. Srinivasan, P. “External Flow Analysis of a Truck for Drag Reduction,” SAE Paper 2000-01-3500 2000
- Baysal, O. Bayraktar, I. “Computational Simulations for the External Aerodynamics of Heavy Trucks,” SAE Paper 2000-01-3501 2000
- McLandress, A.S. Loczi, J. Griaznov, V. “A Rapid Duct Development and Diagnostic Tool (R3DT) for Numerically Simulating Airflow Through Complex Three Dimensional Ducts,” SAE Paper 2000-01-3498 2000
- Okumura, K. “CFD Simulation by Automatically Generated Tetrahedral and Prismatic Cells for Engine Intake Duct and Coolant Flow in Three Days,” SAE Paper 2000-01-0294 2000
- Wulf, A. Steberl, R. Akdag, V. “Efficient Integration of CFD into Product Design,” Conference for Industrial Computational Fluid Dynamics von Karman Institute for Fluid Dynamics Belgium May 31 1999
- Fluent Inc. FLUENT™ 5 User's Guide July 1998
- Abbott, I.H. von Doenhoff, A.E. Theory of Wing Sections Including A Summary of Airfoil Data New York Dover Publications, Inc. 1959
- Fluent, Inc. GAMBIT 1 Modeling Guide May 1998
- Katz, J. “Calculation of the Aerodynamic Forces on Automotive Lifting Surfaces,” ASME Journal of Fluids Engineering 107 Dec. 1985 438 443
- Recant, I.G. “Wind Tunnel Investigation of Ground Effect on Wings with Flaps,” NACA Technical Note No. 705 NACA 1939
- Gerhart, P.M. Gross, R.J. Hochstein, J.I. Fundamentals of Fluid Mechanics Second Reading, Massachusetts Addison-Wesley Publishing Company 1992 586