This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Staged fuel injection with in-line pumps: simulation and experiments
Technical Paper
2001-01-1864
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
It is well known that the combustion development in Diesel engines is strongly dependent on the injected fuel rate versus crank angle. In the last few years new technologies for controlling the injection rate have been developed and tested; many researchers have investigated the effect of split injection on both particulate and NOx emissions. For small diesel engines electronically controlled injection systems have too high incidence on the final costs.
In this paper a mechanical injection system is presented that takes advantage of a modified in-line pump order to achieve a two-stage injection. Tests have been carried out by means of an atmospheric test rig the fuel injection system. The experimental results confirm that the two-stage injection occurs when utilizing the modified pump. A computer code, developed by the authors, has been used in order to simulate the modified injection system; the model worked out to be very useful to determine the geometrical features the pump.
Recommended Content
Authors
Topic
Citation
Berta, G., Casoli, P., and Vacca, A., "Staged fuel injection with in-line pumps: simulation and experiments," SAE Technical Paper 2001-01-1864, 2001, https://doi.org/10.4271/2001-01-1864.Also In
References
- BERTA G.L. “Numerical simulation of a Diesel fuel injection system” ATA 2 nd International conference on “Control and diagnostic in automotive applications” Genova Ottobre 1998
- CASOLI P. “Simulazione numerica di apparati di iniezione per motori Diesel ad iniezione diretta” 14-17 Settembre 1999
- REID R.C. PRAUSNITZ J.M. POLING B.E. The properties of gases and liquids Mc Graw-Hill 1988
- CATANIA A.E. DONGIOVANNI C. MITTICA A. Implicit numerical model of a high-pressure injection system - Transaction of the ASME Journal of Engineering for Gas Turbines and Power 114 July 1992
- CATANIA A.E. DONGIOVANNI C. MITTICA A. 46 6 7 1993
- HENEIN N.A. JAWAD B. GIULARI E. Effects of physical properties of fuels on Diesel Injection - Transaction of the ASME Journal of Engineering for Gas Turbines and Power 112 July 1990
- HETSRONI G. Handbook of multiphase systems Mc Graw Hill 1982
- CATANIA A.E. DONGIOVANNI C. MITTICA A. NEGRI A. SPESSA E. 1996
- BADAMI M. CATANIA A.E. DONGIOVANNI C. MITTICA A. MOLINA G. NEGRI A. SPESSA E. 1996
- FEOLA M. PELLONI P. CANTORE G. BELLA G. CASOLI P. TODERI G. Optimization of injection law for a D.I. Diesel engine - Transaction of the ASME Journal of Engineering for Gas Turbines and Power 114 July 1992
- PELLONI P. BIANCHI G.M. CASOLI P. TODERI G. LUPPINO BERTONI F. Numerical analysis of soot and NOx in a D.I. Diesel engine according to ISO 8178-C1 test cycle - ICE97 Capri-Naples September 1997
- IDEL'CIK I.E Eyrolles Editor Paris 1960
- ERLACH H. CHMELA F. CARTELLIERI W. HERZOG P. Pressure modulated injection and its effect on combustion and emissions of a HD Diesel engine SAE paper n. 952059
- OMORI TOSHIHIKO Electronic controlled fuel injection system for clean Diesel engine
- YUDANOV S.V. Development of the hydraulically actuated electronically controlled unit injector for Diesel engines SAE paper n. 952057
- KARL-HEINZ HOFFMAN V. HUMMEL K. MADERSTEIN T. PETERS A. 58 1997 10
- HARDENBERG H. 45 1984 10
- HARDENBERG H. 46 1985 4
- HARDENBERG H. 48 1987 5
- HOFFMAN J.D. Numerical methods for engineers and scientists Mc Graw Hill 1992