This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Intake-Valve Temperature Histories During S.I. Engine Warm-Up
Technical Paper
2001-01-1704
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
The present study is an experimental investigation on the influence of engine operational parameters on the temperature history of intake valves. During the initial stage of the warm-up process, the temperature history of the intake valve followed an exponential behavior with a time constant that ranged from about 23 to 39 s for the test conditions examined. In contrast, the temperature history of the coolant varied linearly with time suggesting that the net heat input to the coolant is roughly constant during the initial stage of the engine warm-up process. After the initial transient phase that lasted about one minute, the temperature rise of the intake valve was quasi-steady. During this latter period, the measured intake valve temperature was predicted by the steady-state temperature correlation developed in an earlier study.
Recommended Content
Ground Vehicle Standard | Elastomeric Bushing "TRAC" Application Code |
Technical Paper | A BRIEF HISTORY OF PISTON RINGS AS OF 1952 |
Technical Paper | Modeling of Pressure Wave Reflection from Open-Ends in I.C.E. Duct Systems |
Authors
Citation
Alkidas, A., "Intake-Valve Temperature Histories During S.I. Engine Warm-Up," SAE Technical Paper 2001-01-1704, 2001, https://doi.org/10.4271/2001-01-1704.Also In
References
- Quader, A. A. Sloane, T. M. Sinkevitch, R. M. Olson, K. L. “Why Gasoline 90% Distillation Temperature Affects Emissions with PFI and Premixed Charge,” SAE Paper 912430 1991
- Boam, D. J. et al. “The Sources of Unburnt Hydrocarbon Emissions from Spark Ignition Engines During Cold Starts and Warm-Up,” Combustion in Engines - Technology, Applications and the Environment , IMechE Paper C448/064 Mechanical Engineering Publications Ltd 57 72 1992
- Alkidas, A. C. Drews, R. J. “Effects of Mixture Preparation on HC Emissions of a S.I. Engine Operating Under Steady-State Cold Conditions,” SAE Transactions, Journal of Fuels & Lubricants 105 1461 1479 1996
- Alkidas, A. C. “Intake-Valve Temperature and the Factors Affecting It,” SAE Paper 971729 1997
- Willumeit, H-P. Steinberg, P. Otting, H. Scheibner, B. Lee, W. “New Temperature Control Criteria for More Efficient Gasoline Engines,” IMechE Paper C433/84 1984
- Marshall, R. A. Sorrell, A. J. Stone C. R. “Modelling of Engine Warm-Up,” Congress on Modeling of Internal Combustion Engines, Paper CMT 8717 1987
- Andrews, G. E. Harris, J. R. Ounzain, A. “Transient Heating and Emissions of an SI Engine During the Warm-up Period,” SAE Paper 880264 1988
- Andrews, G. E. Harris, J. R. Ounzain, A. “SI Engine Warm-Up: Water and Lubricating Oil Temperature Influences,” SAE Paper 892103 1989
- Andrews, G. E. Harris, J. R. Ounzain, A. “The Influence of External Heat Losses on the Transient SFC and Emissions During the Warm-up Period of an SI Engine,” Engine Transient Performance IMechE 1990
- Trapy, J. D. Damiral, P. “An Investigation of Lubricating System Warm-Up for the Improvement of Cold Start Efficiency and Emissions of S.I. Automotive Engines SAE Paper 902089
- Daneshgari, P. Borgmann, K. Job, H. “The Influence of Temperature Upon Gasoline Deposit Build-Up on the Intake Valves,” SAE Paper 890215 1989
- Worthen, R. P. Tunnecliffe, T. N. ”Temperature Controlled Engine Valves,” SAE Paper 820501 1982
- Cherrie, J. M. “Factors Influencing Valve Temperatures in Passenger Car Engines,” SAE Paper 650484 1965
- Worthen, R. P. Rauen, D. G. “Measurement of Valve Temperatures and Strain in a Firing Engine,” SAE Paper 860356 1986
- Todsen, Von U. Krentscher, B. MTZ Motortechnische Zeitschrift 53 476 443 1992
- Alkidas, A. C. “Thermal Loading of the Cylinder Head of a Spark-Ignition Engine,” Heat Transfer Engineering 3 3-4 66 74 1982
- Curtis, E. W. et al “Modeling Intake Valve Warm- Up,” ASME Paper 97-ICE-40 1997
- Cowart, J. Cheng, W. ”Intake Valve Thermal Behavior During Steady-State and Transient Engine Operation,” SAE Paper 1999-01-3643 1999
- Taylor, C.F. The Internal-Combustion Engine in Theory and Practice 1 MIT Press Cambridge, Mass. 266 302 1978
- Alkidas, A. C. “Effects of Operational Parameters on Structural Temperatures and Coolant Heat Rejection of a S.I Engine,” 1993 Vehicle Thermal Management Systems Conference Proceedings (P-263), SAE Paper 931124 443 458 1993
- Grissom, W. M. Wierum, F. A. “Liquid Spray Cooling of a Heated Surface,” Int. J. Heat Mass Transfer 24 261 271 1981
- Martins, J. J. G. Finlay, I. C. “Fuel Preparation in Port-Injected Engines,” SAE Paper 920518 1992
- Shayler, P. J. Colechin, M. J. Scarisbrick, A. “Heat Transfer Measurements in the Intake Port of a Spark Ignition Engine,” SAE Paper 960273 1996
- Reilly, R. J. Andersen, R. P. Casparian, R. J. Dugdale, P. J. “Saturn DOHC and SOHC Four Cylinder Engines,” SAE Paper 910676 1991
- Beckwith, T. G. Buck, N. L. Marangoni, R. D. Mechanical Measurements Third Addison- Wesley Publishing Co. Mass. 49 83 1982
- Mandrusiak, G. D. Alkidas, A. C. “Impact of Engine Design on Vehicle Heating System Performance” 1997 Vehicle Thermal Management Systems Conference - VTMS 3 SAE P-314 519 534 1997
- Taylor, C.F. Toong, T.-Y. “Heat Transfer in Internal-Combustion Engines,” ASME Paper 57-HT-17 1957
- Heywood, J. B. Internal Combustion Engine Fundamentals McGraw-Hill Book Co. N.Y. 668 711 1988
- French, C. C. J. Atkins, K. A. “Thermal Loading of a Petrol Engine,” Proc. Inst. Mech. Engrs London 187 561 573 1973
- Shayler, P. J. May, S. A. Ma, T. “Heat Transfer to the Combustion Chamber Walls in Spark Ignition Engines,” SAE Paper 950686 1986
- Kapadia, D. A. Borman, G. L. “The Effect of Heat Transfer on the Steady Flow Through a Poppet Valve,” SAE Paper 670479 1967
- Annand, W. J. D. “Experiments on a Model Simulating Heat Transfer Between the Inlet Valve of a Reciprocating Engine and the Entering Stream,” Proc. Instn Mech Engrs 182 37 41 1967-68
- Engh, G. T. Chiang, C. “Correlation of Convective Heat Transfer for Steady Intake-Flow Through a Poppet Valve,” SAE Paper 700501 1970
- Annand, W. J. D. Lanary, R. S. “Heat Transfer Measurements on a Simple Model Representing a Poppet Exhaust Valve in an Outflowing Stream,” J. Mechanical Engineering Science 12 3 223 229 1970
- Martins, J. J. G. Finlay, I. C. “Heat Transfer to Air-Ethanol and Air-Methanol Sprays Flowing in Heated Ducts and Across Heated Intake Valves,” SAE Paper 900583 1990