This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
DIESEL ENGINE TRANSIENT OPERATION WITH TURBOCHARGER COMPRESSOR SURGING
Technical Paper
2001-01-1241
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
The transient operation of a Diesel engine when the turbocharger compressor is driven to its unstable region was examined though detailed simulation. This was accomplished by using a mathematical model, capable of predicting the behavior of a compression system including the case where compressor surging occurs. This model was tested for a simple compression system, and validated against available experimental data. After that, it was incorporated into a detailed reciprocating engine simulation code. Transient engine operation cases in which compressor surging occurred were simulated and the derived results for the behavior of the compressor and engine are presented.
Recommended Content
Authors
Citation
Theotokatos, G. and Kyrtatos, N., "DIESEL ENGINE TRANSIENT OPERATION WITH TURBOCHARGER COMPRESSOR SURGING," SAE Technical Paper 2001-01-1241, 2001, https://doi.org/10.4271/2001-01-1241.Also In
References
- Watson, N. Janota, M.S. “Turbocharging the Internal Combustion Engine” Macmillan Press London 1982
- Biaggini, G. Buzio, V. Ellensohn, R. Knecht, W. “The New Iveco Cursor 8 Diesel Engine” MTZ Motortechnische Zeitschrift 640 649 1999
- Klingmann, R. Fick, W. Bruggemann H. The new Common Rail Direct injection Diesel Engines for the updated E-class Part 2: Combustion and Engine Management” MTZ Motortechnische Zeitschrift 426 437 1999
- Bartsch, P. Prenninger, P. Allmer, I. “Transient Performance Optimization of Turbocharged Engines by Means of Gas Exchange Simulations” IMechE International Conference on Turbocharging and Air Management Systems 237 251 London 1998
- Greitzer, E.M. “Surge and Rotating Stall in Axial Flow Compressors. Part I: Theoretical Compression System Model” ASME Journal of Engineering for Power 98 190 198 1976
- Hansen, K.E. Jørgensen, P. Larsen, P.S. “Experimental and Theoretical Study of Surge in a Small Centrifugal Compressor” ASME Journal of Fluids Engineering 103 391 395 1981
- Fink, D.A. Cumpsty, N.A. Greitzer, E.M. “Surge Dynamics in a Free-Spool Centrifugal Compressor System” ASME Journal of Turbomachinery 114 321 332 1992
- Foss, A.M. Heath, R.P.G. Heyworth, P. Cook, J.A. Mc Lean, J. “Thermodynamic simulation of a turbocharged spark ignition engine for electronic control development” Proceedings of 7 th IMechE International Conference on Automotive Electronics 195 202 London 1989
- Chesse, P. Hetet, J.F. Tauzia, X. Roy, P. Inozu, B. “Performance Simulation of Sequentially Turbocharged Marine Diesel Engines with Applications to Compressor Surge” Proceeding of ASME ICE Spring Technical Conference 30-2 31 40 Florida (USA) April 26-29 1998
- Skopil, M. Bulaty, T. “Calculation of Compressor Surge with Unsteady Flow Model” IMechE International Conference on Turbocharging and Air Management Systems 219 225 London 1998
- Heywood, J.B. “Internal Combustion Engines Fundamentals” Mc-Graw Hill 1988
- Cipollone, R. Sciarretta, A. “On the Air Dynamics in ICE Intake Manifolds. The Development of a quasi propagatory model” 6th IEEE Mediterranean Conference on Control and Systems Alghero 9-11 June 1998 1998
- Wachter, J. Lohle, M. “Experimental investigation of the dynamic behavior of centrifugal compressors” Japikse D. Stability, stall and surge in compressors and pumps ASME FED 19 23 30 1984
- Kyrtatos, N.P. Koumbarelis, I. “Performance Prediction of Next-Generation Slow Speed Diesel Engines during Ship Manoeuvers” Trans ImarE 106 1 26 1994
- Kyrtatos, N.P. “MOtor THERmodynamics Ver 1.3 - USER MANUAL” NTUA/LME 1999
- Theotokatos, G. Kyrtatos, N.P. “Modeling of Centrifugal Compression System Dynamics” NTUA/LME Technical Report, No. 55/TR/2000 2000
- Theotokatos, G. “Prediction of the Complete Characteristics of a Centrifugal Compressor” NTUA/LME Technical Report, No. 54/TR/2000 2000
- Moore, F. K. Greitzer, E.M. “A Theory of Post-stall Transients in Axial Compression Systems. Part I: Development of Equations” ASME Journal of Engineering for Gas Turbines and Power 108 68 76 1986
- Japikse, D. Baines, N.C. Introduction to Turbomachinery Concepts ETI Inc. Norwich 1994
- Botros, K.K. “Transient Phenomena in Compressor Stations During Surge” ASME Journal of Engineering for Gas Turbines and Power 116 133 142 1994
- Gravdahl, J.T. Egeland, O. Compressor Surge and Rotating Stall: Modeling and Control Springer London 1999
- Watson, N. Pilley, A.D. Marzouk, M. “A Combustion Correlation for Diesel Engine Simulation” SAE Paper 800029 1980
- Woschni, G. “Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine” SAE paper 670931 1967
- Rohsenow, W.M. Hartnett, J.P. Ganic, E. “ Handbook of Heat Transfer Fundamentals ” McGraw-Hill New York 2nd 1985
- Ciulli, E. “A Review of Internal Combustion Engine Losses. Part 1: Specific Studies on the Motion of Pistons, Valves and Bearings” IMechE 1992