This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Fuel Design Concept for Low Emission in Engine Systems 2nd report: Analysis of combustion characteristics for the mixed fuels
Technical Paper
2001-01-0202
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2001 World Congress
Language:
English
Abstract
In the present study, we have proposed a novel fuel design concept in order to achieve low emissions and combustion control in engine systems. The fuel design concept is based on the combustion control that could be realized by using a mixed fuel with a lower boiling point fuel, such as gasoline or gaseous fuel components and a higher boiling point fuel, such as gas oil or fuel oil components. According to the fuel design concept proposed in this work, the characteristics of vaporization during mixture formation process as well as of combustion can be reasonably improved due to the formation of two-phase region. The heat release analysis was conducted to compare the temporal history of heat release for both a mixed fuel and a single component fuel that has the same transport properties of mixed fuels. In addition, the two-color method, which simultaneously allows the measurements of temperature distribution and soot concentration, is applied to the combustion field for mixed fuels. The several experiments were conducted in Rapid Compression & Expansion Machine (RCEM). The experimental results related to fuel distribution and combustion process shows that the fuel design concept proposed in the present study can be applied to the combustion system for low emission and combustion control.
Authors
Citation
Kawano, D., Senda, J., Kawakami, K., Shimada, A. et al., "Fuel Design Concept for Low Emission in Engine Systems2nd report: Analysis of combustion characteristics for the mixed fuels," SAE Technical Paper 2001-01-0202, 2001, https://doi.org/10.4271/2001-01-0202.Also In
References
- Furutani, M. Ohta, Y. Kono, M. Hasegawa, M. “An Ultra-Lean Premixed Compression-Ignition Engine Concept and its Characteristics” Proc. COMODIA98 Kyoto 173 177 1998
- Takeda, Y. Nakagome, K. Niimura, K. “Emission Characteristics of Premixed Lean Diesel Combustion” SAE Paper 961163 1996
- Harada, A. Shimazaki, N. Sasaki, S. Miyamoto, T. Akagawa, H. Tsujimura, K. “The Effects of Mixture Formation on Premixed Lean Diesel Combustion” SAE Paper 980533 1998
- Yanagihara, H. Sato, Y. Mizuta, J. “A Simultaneous Reduction of NOx and Soot in Diesel Engines under a New Combustion System (Uniform Bulky Combustion System-UNIBUS)” 17th International Vienna Motor Symposium Vienna 303 314 1996
- Suzuki, H. Koike, N. Ishii, H. Odaka, M. “Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 1: Experimental Investigation of Combustion and Exhaust Emission Behavior Under Pre-Mixed Homogeneous Charge Compression Ignition Method” SAE Paper 970313 1997
- Suzuki, H. Koike, N. Ishii, H. Odaka, M. “Exhaust Purification of Diesel Engines by Homogeneous Charge with Compression Ignition Part 2: Analysis of Combustion Phenomena and NOx Formation by Numerical Simulation with Experiment” SAE Paper 970313 1997
- Hamamoto, Y. Tomita, E. Nagayoshi, M. Siagian, A. “Fundamental Study on Combustion in Homogeneous-Charge Compression-Ignition Engines” Proc. 14th Internal Combustion Engine Symposium 265 270 1997
- Tsurutani, K. Takei, Y. Fujimoto, Y. Matsudaira, J. Kumamoto, M. “The effects of Fuel Properties Oxygenates on Diesel Exhaust Emissions” SAE Paper 952349 1995
- Bertoil, C. Giacomo, N. D. Beatrice, C. “Diesel Combustion Improvements by the Use of Oxgenated Synthetic Fuels” SAE Paper 972972 1997
- Kapus, P. Ofner, H. “Development of Fuel Injection Equipment and Combustion System for DI Diesels Operated on Dimethyl Ether” SAE Paper 950062 1995
- Kajitani, S. Chen, Z. L. Konnno, M. Rhee, K. T. “Engine Performance and Exhaust Characteristics of direct-nijection diesel engine operated with DME” SAE Paper 972973 1997
- Nabi, M. N. Minami, M. Ogawa, H. Miyamoto, N. “Ultra Low Emission and High Performance Diesel Combustion with Highly Oxygenated Fuel” SAE Paper, No. 2000-01-0231 2000
- Ikeda, M. Mikami, M. Kojima, N. “Exhaust Characteristics of LPG/Gas-oil Diesel Engines” Trans. JSME 64 625 370 376 1998
- Yamazaki, N. Takahashi, N. Chikahisa, T. Miyamoto, N. Murayama, T. “Combustion Improvement of DI Diesel Engine by Mixing LPG with Diesel Fuel” Trans. JSAE 36 1987
- Hikino, K. Suzuki, T. Uematsu, S. Daisyo, Y. “Combustion Characteristics of Heavy Duty Fuel Diesel Engine” Proc. JSAE 892147 253 256 1989
- Sheng, H. Z. Chen, L. Wu, C. K. “The Droplet Group Micro-Explosions in W/O Diesel Fuel Emulsion Sprays” SAE Paper 950855 1995
- Kadota, T. Yamasaki, H. Segawa, I. Kawatsu, T. Tsue, M. “Instantanepus Two Dimensional Visualization of Soot Concentration Profiles in the Diesel Spray Flame” Proc. COMODIA 98 Kyoto 105 110 1998
- Born, C. Peters, N. “Reduction of Soot Emission at a Diesel Engine by Additional Injection of Hydrogen Peroxide During Combustion” SAE Paper 982676 1998
- Senda, J. Hashimoto, K. Ifuku, Y. Fujimoto, H. “CO 2 Mixed fuel Combustion System for Reduction of NO and Soot Emission of Diesel Engine” SAE Paper 970319 1997
- Senda, J. Yokoyama, T. Ikeda, M. Fujimoto H. “Spray Combustion of Liquefied CO 2 Mixed Fuel for NO and Soot Simultaneous Reduction” Proc. COMODIA 98 Kyoto 117 122 1998
- Senda, J. Ikeda, M. Yamamoto, M. Kawaguchi, B. Fujimoto, H. “Low Emission Diesel Combustion System by Use of Reformulated Fuel with Liquefied CO 2 and n-Tridecane” SAE Paper, 1999-01-1136 1999
- Senda, J. Hotta, I. Kawano, D. Fujimoto, H. “Fuel Design Concept for Low Emission in Engine Systems” Proc. 15th Internal Combustion Engine Symposium (International) Seoul 99 103 1997
- Senda, J. Kawano, D. Hotta, I. Kawakami, K. Fujimoto, H. “Fuel Design Concept for Low Emission in Engine Systems” SAE Paper 2000-01-1258 2000
- Senda, J. Kawano, D. Hotta, I. Kawakami, K. Fujimoto, H. “Fuel Design Concept for Low Emission in Engine Systems” Trans. JSAE 31 2 11 16 2000
- Wang, C.H. Liu, X. Q. Law, C. K. “Combustion and Microexplosion of Freely Falling Multicomponent Droplets” Combustion and Flame 56 175 197 1984
- Niioka, T. Sato, J. “Combustion and Microexplosion Behavior of Miscible Fuel Droplets under High Pressure” Twenty-first Symposium (International) on Combustion The Combustion Institute 625 631 1986
- Mikami, M. Yagi, T. Kojima, N. “Occurrences of Microexplosion in Combustion of Fuel Mixture Droplets” Trans. JSME 64-624 324 329 1998
- Shinoda, S. “Principles of Solution and Solubility” Maruzen Co. Tokyo, Japan 74 77 1991
- Ely, J. F. Huber, M. L. “NIST Thermophysical Properties of Hydrocarbon Mixtures Database (SUPERSTRAPP) Version1.0 Users' Guide” 10 1992
- Stasio, S. Massoli, P. “Influence of The Soot Property Uncertainties in Temperature and Volume-Fraction Measurements by Two-Colour Pyrometry” Meas. Sci. Technol 5 1453 1465 1994
- Bertoli, C. Beatrice, C. Stasio, S. Giacomo, N. “In Cylinder Soot and NOx Concentration Measurements in D.I. Diesel Engine Fed by Fuels of Varying Quality” SAE Paper 960832 1996
- Bakenhus, M. Reitz, R. D. “Two-Color Combustion Visualization of Single and Split Injections in a Single-Cylinder Heavy-Duty D.I. Diesel Engine Using an Endoscope-Baced Imaging System” SAE Paper 1999-01-1112 1999
- Hottel, H. G. Broughton, F. P. Ind. and Engng. Chem. 166 1932