This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Development of Pneumatic Aerodynamic Devices to Improve the Performance, Economics, and Safety of Heavy Vehicles
Technical Paper
2000-01-2208
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
Government/Industry Meeting
Language:
English
Abstract
Under contract to the DOE Office of Heavy Vehicle Technologies, the Georgia Tech Research Institute (GTRI) is developing and evaluating pneumatic (blown) aerodynamic devices to improve the performance, economics, stability and safety of operation of Heavy Vehicles. The objective of this program is to apply the pneumatic aerodynamic aircraft technology previously developed and flight-tested by GTRI personnel to the design of an efficient blown tractor-trailer configuration. Recent experimental results obtained by GTRI using blowing have shown drag reductions of 35% on a streamlined automobile wind-tunnel model. Also measured were lift or download increases of 100-150% and the ability to control aerodynamic moments about all 3 axes without any moving control surfaces. Similar drag reductions yielded by blowing on bluff afterbody trailers in current US trucking fleet operations are anticipated to reduce yearly fuel consumption by more than 1.2 billion gallons, while even further reduction is possible using pneumatic lift to reduce tire rolling resistance. Conversely, increased drag and down force generated instantaneously by blowing can greatly increase braking characteristics and control in wet/icy weather due to effective “weight” increases on the tires. Safety is also enhanced by controlling side loads and moments caused on these Heavy Vehicles by winds, gusts and other vehicles passing. This may also help to eliminate the jack-knifing problem if caused by extreme wind side loads on the trailer. Lastly, reduction of the turbulent wake behind the trailer can reduce splash and spray patterns and rough air being experienced by following vehicles. To be presented by GTRI in this paper will be results developed during the early portion of this effort, including a preliminary systems study, CFD prediction of the blown flowfields, and design of the baseline conventional tractor-trailer model and the pneumatic wind-tunnel model.
Recommended Content
Topic
Citation
Englar, R., "Development of Pneumatic Aerodynamic Devices to Improve the Performance, Economics, and Safety of Heavy Vehicles," SAE Technical Paper 2000-01-2208, 2000, https://doi.org/10.4271/2000-01-2208.Also In
References
- Hucho, Wolf-Heinrich “Aerodynamics of Road Vehicles, from Fluid Mechanics to Vehicle Engineering,” Butterworth-Heinemann London 1990
- Suski, Victor “Improved Heavy Truck Aerodynamics, Statement of Need,” American Trucking Associations Alexandria, VA 1995
- Englar, R. J. Smith M. J. Niebur C. S. Gregory S. D. “Development of Pneumatic Aerodynamic Concepts for Control of Lift, Drag, and Moments plus Lateral/Directional Stability of Automotive Vehicles,” SAE paper 960673 SAE International Congress & Exposition Detroit Feb. 26-29 1996 SAE SP-1145 “Vehicle Aerodynamics: Wind Tunnels, CFD, Aeroacoustics, and Ground Transportation Systems,” 27 38
- U. S. Department of Energy, Oak Ridge National Laboratory “Development and Evaluation of Pneumatic Aerodynamic Devices to Improve the Performance, Economics, Stability and Safety of Heavy Vehicles Dec 1 1998
- Englar, R. J. Applegate C. A. “Circulation Control-A Bibliography of DTNSRDC Research and Selected Outside References (Jan 1969 to Dec 1983),” David Taylor Naval Ship Research and Development Center Report 84/052 Carderock, MD Sept. 1984
- Englar, Robert J. “Development of the A-6/ Circulation Control Wing Flight Demonstrator Aircraft,” DTNSRDC Report ASED-274 January 1979 Englar, R. J, et al “Design of the Circulation Control Wing STOL Demonstrator Aircraft,” AIAA paper No. 79-1842 August 1979
- Englar, R. J. et al. “Application of Circulation Control to Advanced Subsonic Transport Aircraft,” AIAA Journal of Aircraft 31 5 1160 1177 Sept - Oct 1994
- Gutierrez, W. T. Hassan B. Croll R.H. Rutledge W.H. “Aerodynamics Overview of the Ground Transportation Systems (GTS) Project for Heavy Vehicle Drag Reduction,” SAE Paper 960906 1996
- SAE Information Report J2085 “Aerodynamic Testing of Road Vehicles; Closed-Test-Section Wind Tunnel Boundary Interference,” August 1993 “Closed-Test-Section Wind Tunnel Blockage Corrections for Road Vehicles,” SP-1176 February 1996