This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Three-Dimensional Heat Transfer & Thermoelastic Deformation Predictions in Forward Lighting
Technical Paper
2000-01-1396
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
The thermal performance of an automotive forward-lighting assembly is predicted with a computational fluid-dynamics (CFD) program. A three-dimensional, steady-state heat-transfer model seeks to account for convection and radiation within the enclosure, conduction through the thermoplastic walls and lens, and external convection and radiation losses. The predicted temperatures agree well with experimental thermocouple and infrared data on the housing. Driven by the thermal expansion of the air near the bulb surface, counter-rotating recirculation zones are predicted within the enclosure. The highest temperatures in the plastic components are predicted on the inner surface of the shelf above the bulb where airflow rising from the hot bulb surface impinges. The thermal model can be used to assess the importance of different heat-transfer mechanisms, such as the effect of coating on thermal-radiation energy redistribution within the enclosure and the result of bulb shield design on hot-spot location and temperature due to the change in airflow passage. One particularly interesting application of the method involves sensitivity studies (virtual design of experiments (DOEs)) that can help facilitate the development of headlamp design guidelines without requiring the costly fabrication and testing of multiple physical prototypes.
To address the issue of beam shift resulting from the thermal distortion of reflectors, a three-dimensional thermoelastic model was developed to predict local displacement and rotation of reflector surfaces. An in-house translator has been developed to translate the finite-element information and computed temperature distribution from a heat-transfer model into shell element. The model uses the thermal cycle as the input to thermo-structural analyses of the reflector. The elastic response resulting from the thermal cycle from room temperature to final steady-state temperature can then be passed to a ray-tracing package for assessing beam shift. Combined, these computational tools can often facilitate the development of business cases for headlamp component integration. For instance, one can choose a cost-effective material that responds to the thermal demands of a housing and bezel or housing and reflector and evaluate the option of integrating these components into a single molded part.
Recommended Content
Authors
Topic
Citation
Liang, E., Yokoyama, K., and Wilson, J., "Three-Dimensional Heat Transfer & Thermoelastic Deformation Predictions in Forward Lighting," SAE Technical Paper 2000-01-1396, 2000, https://doi.org/10.4271/2000-01-1396.Also In
References
- Siegel, R. Howell J.R. Thermal Radiation Heat Transfer 3rd Hemisphere, London 1992
- Sherman, K.C. “Infrared Transparent Reflector Materials,” SAE Technical Paper No. 950556 Advances in Automotive Plastic Components and Technology (SP-1099) International Congress and Exposition Detroit, Michigan 1995
- Liang, E.W. Lillquist R.D. Gallo J.P. Poslinski A.J. Grimson A. Strauss B.R. “Predicting the Thermal Performance of an Automotive Fog Lamp Reflector,” SAE Technical Paper Series No. 970912 New Concepts in International Automotive Lighting Technology (SP-1249) International Congress and Exposition Detroit, Michigan 1997
- “Optical Properties,” Encyclopedia of Polymer Science and Engineering V 10 John-Wiley & Sons 1987
- Fused Quartz Properties and Usage Guide General Electric Company 1995
- Chapman, A. J. Heat Transfer 4th Macmillan, New York 1984
- Moore, W.I. Powers C.R. Donvan E.S. “Temperature Predictions for Automotive Headlamps Using a Coupled Specular Radiation and Natural Convection Model” SAE Technical Paper Series No. 1999-01-0698 Advances in Automotive Lighting Technology (SP-1424) International Congress and Exposition Detroit, Michigan 1999
- FIDAP 8 Theory Manual Fluent Inc Lebanon, NH 1998
- ABAQUS Theory Manual HKS Inc Pawtucket, RI 1998
- GE Plastics Engineering Design Database and Design Guide GE Plastics Pittsfield, MA 1989