This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
A Study on the Effects of Simulation Parameters on Springback Prediction
Technical Paper
2000-01-1109
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
The use of commercial finite element analysis (FEA) software to perform stamping feasibility studies of automotive components has grown extensively over the last decade. Although product and process engineers have now come to rely heavily on results from FEA simulation for manufacturability of components, the prediction of springback has still not been perfected. Springback prediction for simple geometries is found to be quite accurate while springback prediction in complex components fails to compare with experimental results. Since most forming simulation FEA software uses a dynamic explicit solution method, the choice of various input parameters greatly affects the prediction of post formed stresses in the final component. Accurate stress prediction is critical for determination of springback, therefore this study focuses on the effects of some of the simulation parameters such as, element size, tool/loading speed and loading profile. The results of the study provide suggestions for decreasing the simulation time with no loss in accuracy of springback prediction.
Recommended Content
Authors
Citation
Rama, S., Zhang, J., Du, C., Hu, Y. et al., "A Study on the Effects of Simulation Parameters on Springback Prediction," SAE Technical Paper 2000-01-1109, 2000, https://doi.org/10.4271/2000-01-1109.Also In
References
- Makinouchi, A. Sheet Metal Forming Simulation in Industry, Journal of Materials Processing Technology 60 1-4 June 1997 19 26
- Leu, D. K. A simplified Approach for Evaluating Bendability and Springback in Plastic Bending of Anisotropic Sheet Metals, Journal of Materials Processing Technology 66 1-3 April 1997 9 17
- Nilsson, A. Melin, L. Magnusson, C. Finite Element Simulation of V-die Bending - A Comparison with Experimental Results Journal of Materials Processing Technology 65 1-3 March 1997 52-58
- Gelin, J. C. Picart, P Proceedings of the NUMISHEET ’99, BURS Edition Caseme, Besancon France. 1 and 2 1999
- Bathe, K.-J. Finite Element Procedures in Engineering Analysis Prentice Hall 1990
- OPTRIS v6.0 User’s Guide Dynamic Software France 1999
- LS-DYNA v950 User’s Manual Livermore Software Technology Corporation, CA 1999
- ABAQUS/Standard User’s Manual Hibbit, Karlsson and Sorenson, Inc. 1998
- Makinouchi, A. Nakamachi, E. Onate, E. Wagoner, R.H. Proceedings of the 2nd International Conference NUMISHEET’93, Isehara, Japan 1993