This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
New Directions in Aluminum-Based P/M Materials for Automotive Applications
Technical Paper
2000-01-0333
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Event:
SAE 2000 World Congress
Language:
English
Abstract
Aluminum-based materials produced by powder metallurgy processing offer a number of interesting and potentially high impact commercial opportunities in the automotive industry if the range of properties available can be expanded in a cost-effective manner. This paper reviews some of these new developments in materials and processes and also provides information that is helpful in assessing their readiness for near-term commercial implementation in the automotive market.
Recommended Content
Technical Paper | Compaction Technologies for Near and Far Term Space Missions |
Technical Paper | Automotive Forgings - Powder Leads to Higher Precision |
Topic
Citation
Hunt, W., "New Directions in Aluminum-Based P/M Materials for Automotive Applications," SAE Technical Paper 2000-01-0333, 2000, https://doi.org/10.4271/2000-01-0333.Also In
References
- Couchman K. Cousino C. “The Processing, Properties, and Applications for Aluminum Powder Metallurgy Materials” SAE Paper No. 940428 SAE 1994
- Sun S. “The Effect of Liquid Formation and Spreading on the Sintering Process & Mechanical Properties of Al-Cu-Mg-Si P/M Alloys” 1992 Michigan Technological University Houghton, MI
- Lumley R.N. Schaffer G. B. “The Effect of Solubility and Particle Size on Liquid Phase Sintering” Scripta Mat . 35 5 1996 589 595
- Lumley R. N. Schaffer G. B. “The Particle Size Effect in Multicomponent Aluminium Alloys” Advances in Powder Metallurgy and Particulate Materials, Proceedings 1996 World Congress on Powder Metallurgy and Particulate Materials 11 MPIF Princeton, NJ 1996 185 196
- Lumley R. N. Schaffer G. B. “The Effect of Additive Particle Size on the Mechanical Properties of Sintered Aluminium-Copper Alloys” Scripta Mat . 1998
- Schaffer G. B. et al. “On the Design of Sintered Aluminum Alloys” Powder Metallurgy Aluminum and Light Alloys for Automotive Applications Conference Jandeska, W. F. Jr. Chernenkoff R. A. MPIF 1998 43 50
- Odani Y. Akechi K. Kurishi N. “High Strength and High Wear Resistance Aluminum-Silicon P/M Alloys” Modern Developments in Powder Metallurgy 16 MPIF 1984
- Hayashi T. et al. “Rotary Car Air Conditioner Made with PM Al-Si Wrought Alloys” Metal Powder Reports Feb. 1991 23 29
- Otsuki M. Kakehashi S. Kohno T. “Mechanical Properties of Powder Forged, Rapidly Solidified Aluminium Alloy Parts” Metal Powder Reports April 1991 30 32
- Das S. K. Gilman P. S. Raybould D. “Applications of Rapidly Solidified High Temperature Aluminum Alloys” Key Engineering Materials 38-39 1989 367 392
- Jatkar A. D. Sawtell R. R. “Aluminum P/M Alloys for Aerospace Applications” PM Aero 91 , International Conference on PM Aerospace Materials 1991 Lausanne, Switzerland 15-1 15-14
- Hildeman G. J. Koczak M. J. “Powder-Metallurgy Aluminum Alloys” Aluminum Alloys-Contemporary Research and Applications, Treatise on Materials Science and Technology 31 Vasudevan A.K. Doherty R. D. Academic Press 1989 323 364
- Masumoto T. Inoue A. “Bulk Amorphous and Nanocrystalline Al-Based Alloys with High Strength” Aluminum Alloys-Volume 1, Proceedings of ICAA-6 Sato T. et al. Japan Institute of Light Metals 1998 33 48
- Ohtera K. Inoue A. Masumoto T. “High Strength Al Base Alloys Obtained from Amorphous Phase” First International Conference on Processing Materials for Properties Henein H. Oki T. TMS 1993 713 716
- Kim Y. Griffith W. M. Froes F. H. “Surface Oxides in P/M Aluminum Alloys” Journal of Metals 1985 27
- Anderson I. E. Foley J. C. Flumerfelt J. F. “Simplified Aluminum Powder Metal Processing Routes for Automotive Applications” Powder Metallurgy Aluminum and Light Alloys for Automotive Applications Conference Jandeska, W. F. Jr. Chernenkoff R. A. MPIF 1998 75 82
- Staniek G. Wefers K. “Chemical Conditioning of Rapidly Solidified Aluminum Alloy Particulate” Advances in Powder Metallurgy-1991 Pease L. F. III Sansoucy R. J. MPIF 1991 31 46
- Takeda Y. et al. “Net Shape P/M Processes and Alloy Development of High Performance Aluminum Alloys and MMC for Automotive Applications” Powder Metallurgy Aluminum and Light Alloys for Automotive Applications Conference Jandeska, W. F. Jr. Chernenkoff R. A. MPIF 1998 19 26
- Leatham A. “Spray Forming: Alloys, Products, and Markets” JOM 51 4 1998 1
- Hummert K. et al. “High Performance, Low Cost Aluminum Alloys Manufactured by Spray Forming” Powder Metallurgy Aluminum and Light Alloys for Automotive Applications Conference Jandeska, W. F. Jr. Chernenkoff R. A. MPIF 1998 107 114
- Stocker P. Ruckert F. Hummert K. “The New Aluminium-Silicon Barrel Technology for Die-Cast Aluminium Crankcases” MTZ Worldwide 58 9 1997 16 19
- Allison J. E. Cole G. S. “Metal-Matrix Composites in the Automotive Industry: Opportunities and Challenges” JOM Jan. 1993 19 24
- Hurley S. “MMCs Find Broad Range of Niche Markets” MBM 1995 54 55
- Parent J.O.G. Iyengar J. Henein H. Int. J. Powder Metallurgy 29 1993 353 365
- Campbell G. T. Raman R. Fields R. “Optimum Press and Sinter Processing for Aluminum/SiC Composites” Powder Metallurgy Aluminum and Light Alloys for Automotive Applications Conference Jandeska, W. F. Jr. Chernenkoff R. A. MPIF 1998 35 42
- Chawla N. Jones J. W. Allison J. E. “Elevated Temperature Tensile and Fatigue Behavior of Particle Reinforced Metal Matrix Composites” Proc. of Fatigue '99 Wu X. R. Wang Z. G. EMAS/HEP 1999 1 7
- Hunt, W. H. Jr. Rodjom T. J. Hyland M. E. “Cost Effective Discontinuously Reinforced Aluminum via Near-Net Shape P/M Processes” Proceedings of the 10 th Annual ASM/ESD Advanced Composites Conference ASM 1994 155 163
- Sawtell R. R. et al. “Method of Producing Structural Metal Matrix Composite Products from a Blend of Powders” Oct. 1 1996