This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
ANNIE, a Tool for Integrating Ergonomics in the Design of Car Interiors
Technical Paper
1999-01-3372
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
In the ANNIE project - Applications of Neural Networks to Integrated Ergonomics - BE96-3433, a tool for integrating ergonomics into the design process is developed. This paper presents some features in the current ANNIE as applied to the design of car interiors. A variant of the ERGOMan mannequin with vision is controlled by a hybrid system for neuro-fuzzy simulation. It is trained by using an Elite system for registration of movements. An example of a trajectory generated by the system is shown. A fuzzy model is used for comfort evaluation. An experiment was performed to test its feasibility and it showed very promising results.
Recommended Content
Authors
- Lars Hanson - Lund Univ.
- Roland Akselsson - Lund Univ.
- Giuseppe Andreoni - Politecnico di Milano
- Camilla Rigotti - Politecnico di Milano
- Rainer Palm - Siemens AG
- Willfried Wienholt - Siemens AG
- Mario Costa - Politecnico diTorino
- Ann Lundin - Volvo Technical Development Corp.
- Fulvio Rizzuto - Alenia Spazio
- Enrico Gaia - Alenia Spazio
- Tomas Engström - Chalmers University of Technology
- Lena Sperling - Lindholmen Development
- Anders Sundin - Lindholmen Development
- Bruno Wolfer - EAI-DELTA GmbH
Topic
Citation
Hanson, L., Akselsson, R., Andreoni, G., Rigotti, C. et al., "ANNIE, a Tool for Integrating Ergonomics in the Design of Car Interiors," SAE Technical Paper 1999-01-3372, 1999, https://doi.org/10.4271/1999-01-3372.Also In
References
- Transom Jack Transom Technologies Inc. Ann Arbor, Michigan, USA
- SAMMIE SAMMIEC CAD Limited Quorn, Leicestershire, England
- SAFEWORK Genicom Consultants Inc Montreal, Quebec, Canada
- The McDonald Douglas Modeling system The Boeing Company USA
- RAMSIS, TECMATH GmbH Kaiserslautern, Germany
- ERGOman, EAI-DELTA GmbH Fellbach, Germany
- Pheasant, S. 1996 Bodyspace, Anthropometry, Ergonomics and the design of work Taylor & Francis
- Diffrient, N. Tilley, A. Harman, D. 1991 Humanscale 1/2/3/4/5/6/7/8/9 The MIT Press, Massachusetts Institute of Technology Cambridge, Massachusetts
- Reynolds, H. M. 1978 The inertial properties of the body and its segments NASA Anthropometric Source book NASA Defense
- Dempster, W. T. 1955 Space requirements of the seated operator: geometrical, kinematic and mechanical aspects of the body with special reference to the limbs WADC Technical Note 55 159 Wright Patterson Airforce Base
- Hanson, L. Holmqvist, K. Sjölander, S. Distante, G. Andreoni. G. Colford, N. Engström, T. Hansson, G-Å. Kadefors, R. Petersson, P. Rigotti, C. Sperling, L. Sundin, A. Akselsson, R. 1998 Mannequin Properties Desired for Ergonomic Evaluation of Car Interiors Proc of the Annual Conference of the Human Factors and Ergonomics Society - European Chapter 43 48
- McAtamney, L. Corlett N. 1993 RULA: a survey method for the investigation of work-related upper limb disorders Applied Ergonomics 24 2 91 99
- Karhu, O. Kansi, I. Kuorinka, I. 1977 Correcting working postures in industry: a practical method for analysis Applied Ergonomics 8 4 199 201
- Waters R. Putz-Andersson, V. Garg, A. Fine, A. 1993 Revised NIOSH equation for the design and evaluation of manual lifting task Ergonomics 36 7 749 776
- Judic, J.-M. Cooper J. A. Truchot, P. v Effenterre, P. Duchamp, R. 1993 More objectives tools for the integration of postural comfort in automotive seat design SAE Technical Paper 930113
- 1995 Earth-moving machinery - Zones of comfort and reach for controls
- Pheasant, S. 1987 Ergonomic standards and guidelines for designers British Standard Institution
- 1996 Passenger cars - Drivers hand control reach
- 1989 Human Engineering design criteria for military systems, equipment and facilities
- Merisalo, T. Hatva, A. Launis, M. 1985 The neck and work Institute of occupational Health Finland
- Ferrigno, G. Pedotti, A. 1985 ELITE : A digital dedicated hardware system for movement analysis via real-time Tv signal processing IEEE Trans. Biomed. Eng. (BME) 32 943 949
- Werbos, P. J. 1990 Backpropagation Through Time: What it does and how to do it Proc of the IEEE 78 1550 1560
- Riedmiller, M. Braun, H. 1993 A Direct Adaptive Method for Faster Backpropagation Learning: The RPROP Algorithm Proc. of the ICNN San Francisco, CA
- Bishop Ch. W. 1995 Neural Networks for Pattern Recognition Oxford University Press
- Wienholt, W. 1998 Eine Methode zur qualitativen Modellierung realistischer menschlicher Bewegungen in Simulationsumgebungen basierend auf neuronalen Netzen (A method of qualitative modeling of human-like motions in simulation environments based on neural networks)
- Bezdek, J. C. 1981 Pattern Recognition with Fuzzy Objective Function Algorithms Plenum Press Ne York
- Gustafson, D. E. Kessel, W. C. 1979 Fuzzy Clustering with a Fuzzy Covariance Matrix Proc. IEEE CDC 761 766
- Stutz, Ch 1998 Fuzzy Clustering for Functional Approximations Siemens AG
- Palm, R. 1992 Control of a Redundant Manipulator Using Fuzzy Rules Fuzzy Sets and Systems 45 279 298
- Liegois, A. 1977 Automatic Supervisory Control of the Configuration and Behaviour Multibody Mechanisms IEEE Trans. Systems. Man Cybernet 7 12 868 871
- Palm, R. Stutz, Ch. Wienholt W. 1998 Datengetriebene kinematische Modellierung eines hochredundanten Gelenkmechanismus mittels Fuzzy-Techniken. (Data driven kinematic modeling of a highly redundant joint mechanism using fuzzy techniques)
- Wienholt, W. Palm, R. 1999 Modeling of human comfort using neural and fuzzy methods