This content is not included in your SAE MOBILUS subscription, or you are not logged in.
Experimental Evaluation for Fluidborne Noise Attenuation in Tuning Cables and Hoses of Automotive Power Steering Hydraulic Systems
ISSN: 0148-7191, e-ISSN: 2688-3627
Published May 17, 1999 by SAE International in United States
Annotation ability available
A tuning cable and hose device, i.e. a flexible metal tuning cable placed coaxially inside a section of hose, is usually used in power steering hydraulic circuits to reduce pressure pulsations in the circuits. To evaluate the fluidborne noise attenuation characteristics of tuning cable and hose devices correctly, a new evaluation method, based on the experimental determination of transmission loss of the tuning cables and hoses, is proposed here. The effectiveness of the method and test system are confirmed. The results obtained are valuable for design optimization and theoretical modeling of hydraulic power steering systems and other similar hydraulic systems.
CitationYu, J., Johnson, F., Iwami, F., Verrecchia, N. et al., "Experimental Evaluation for Fluidborne Noise Attenuation in Tuning Cables and Hoses of Automotive Power Steering Hydraulic Systems," SAE Technical Paper 1999-01-1777, 1999, https://doi.org/10.4271/1999-01-1777.
- Klees G. T. “Attenuation Device,” 1967-6
- Hastings M. C. Chen C. C. “Analysis of Tuning Cables for Reduction of Fluidborne Noise in Automotive Power Steering Hydraulic Lines,” SAE paper 931295 277 282 1993
- Nagata S. “Simulation of Resonator Hose,” Proceedings of JHPS 129 132 1993
- Hattori K. Yamada M. Haga K. Saitou K. “Pulsation Attenuation Characteristics Analysis of Flexible Hose with Spiral Tube Insert,” Proceedings of JHPS 9 12 1994
- Yu J. Kojima E. “Wave Propagation in Fluids Contained in Finite-Length Anisotropic Viscoelastic Pipes,” J. Acoust. Soc. Am. 104 6 3227 3235 1998
- Yu J. Kojima E. “Wave Propagation Characteristics of Fluid Contained in a Finite-Length Hydraulic High-Pressure Flexible Hose (1st Report, Mathematical Model Considering Anisotropic Viscoelasticity of Hose Wall and Boundary Conditions at Hose Fittings),” Trans. JSME, Part C 62 598 121 128 1996
- Yu J. Kojima E. Shinada M. “Wave Propagation Characteristics of Fluid Contained in a Finite-Length Hydraulic High-Pressure Flexible Hose (2nd Report, Experimental Investigation of Analytical Model in Frequency Domain),” Trans. JSME, Part C 62 598 129 136 1996
- Lung T. Y. Doige A. G. “A Time-Averaging Transient Testing Method for Acoustic Properties of Piping Systems and Mufflers with Flow,” J. Acoust. Soc. Am. 73 3 867 876 1983
- To C. W. S. Doige A. G. “A Transient Testing Technique for the Determination of Matrix Parameters of Acoustic System, 1: Theory and Principles,” J. Sound Vib. 62 2 207 222 1979
- Chung J. Y. Blaser D. A. “Transfer Function Method of Measuring In-Duct Acoustic Properties. 1. Theory,” J. Acoust. Soc. Am. 68 3 907 913 1980
- Kojima E. Ichiyanagi T. Kimura Y. “Analysis of Flexible Hoses with Spiral Tubular Inserts for a Reduction in the Fluidborne Pressure Pulsation in an Automotive Power Steering Hydraulic System,” Hydraulics and Pneumatics 27 6 98 105 1997