This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Mode I Fracture Testing of Adhesively Bonded Joints
Technical Paper
1999-01-1253
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Several standard methods exist for testing composites, metals and plastics in Mode I fracture. However, these standard test methods have limitations that disqualify them as candidates for testing certain automotive materials. In order to conduct successful fracture toughness tests with these automotive materials, a modified double cantilever beam testing geometry and associated new procedure have been developed. Both the test procedure and the data analysis have been fully documented in a draft standard. Representative SRIM composite, e-coat steel and epoxy were selected to develop and validate the testing procedure.
Recommended Content
Authors
Topic
Citation
Klett, L. and Boeman, R., "Mode I Fracture Testing of Adhesively Bonded Joints," SAE Technical Paper 1999-01-1253, 1999, https://doi.org/10.4271/1999-01-1253.Also In
Polymer Composites and Polymeric Materials for Energy Management and Occupant Safety
Number: SP-1448; Published: 1999-03-01
Number: SP-1448; Published: 1999-03-01
References
- Warren C. David Boeman Raymond G. Paulauskas Felix L. “Adhesive Bonding of Polymeric Materials for Automotive Applications” Proceedings of the Annual Automotive Technology Development Contractor's Meeting May 1994
- Boeman Raymond G. Warren C. David “Fracture Testing and Analysis of Adhesively Bonded Joints for Automotive Applications” Proceedings of the 10 th Annual ASM/ESD Advance Composites Conference November 1994
- “Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites,” Annual Book of ASTM Standards American Society for Testing and Materials Philadelphia
- “Plain-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials,” Annual Book of ASTM Standards American Society for Testing and Materials Philadelphia
- “Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints,” Annual Book of ASTM Standards American Society for Testing and Materials Philadelphia
- Whitney J. M. “Stress Analysis of the Double Cantilever Beam Specimen” Composites Science and Technology 23 1985 201 219
- Mostovoy S. Ripling E. J. Bersch C. F. “Fracture Toughness of Adhesive Joints” Journal of Adhesion 3 1971 125 144
- Hwang W. Han K. S. “Interlaminar Fracture Behavior and Fiber Bridging of Glass-Epoxy Composite under Mode I Static and Cyclic Loadings” Delamination Toughness and Performance Issues 409 443
- Gillespie J. W. Carlsson L. A. “Interlaminar Fracture of Laminated Composite Materials” Delaware Composites Design Encyclopedia Test Methods 6 Technomic Publishing Co, Inc Lancaster, Pennsylvania
- “Fracture, Interlaminar” International Encyclopedia of Composites Lee Stuart M. 2 289 306 VCH New York
- Johnson W. S. Mangalgiri P. D. “Investigation of Fiber Bridging in Double Cantilever Beam Specimens” Composite Technology Review Spring 1987
- Spearing S. M. Evans A. G. “The Role of Fiber Bridging in the Delamination Resistance of Fiber-Reinforced Composites” Acta metall. Mater. 40 9 2191 2199 1992
- Whitney J. M. Browning C. E. Hoogsteden W. “A Double Cantilever Beam Test for Characterizing Mode I Delamination of Composite Materials” Delamination in Advanced Composites Newaz Golam M. Technomic Publishing Company, Inc Lancaster, Pennsylvania 1991
- Fernlund G. Spelt J. K. “Analytical Method for Calculating Adhesive Joint Fracture Parameters” Engineering Fracture Mechanics 40 1 119 132 1991
- Fleck Norman A. Hutchinson John W. Sou Zhigang “Crack Path Selection in a Brittle Adhesive Layer” Int. J. Solids Structures 27 13 1683 1703 1991