This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Periodically Reversed Flow Regeneration of Diesel Particulate Traps
Technical Paper
1999-01-0469
ISSN: 0148-7191, e-ISSN: 2688-3627
Annotation ability available
Sector:
Language:
English
Abstract
Diesel particulate filter regeneration (through oxidation of the collected soot particles) is not currently possible under all engine operating conditions without additional external thermal energy. The exploitation of the autothermal properties of the reverse flow reactor has been suggested to reduce further the soot ignition temperature and hereby is studied for the periodically reversed flow regeneration of soot particulate filters, with the aid of a mathematical model for the regeneration process, validated against experimental data. The numerical results confirm the capability of the new technique to effectively succeed where conventional regeneration fails, extending thus the operating limits of already practiced regeneration techniques (thermal or catalyst-assisted) and setting the stage for the construction of an industrial prototype.
Recommended Content
Authors
Citation
Konstandopoulos, A. and Kostoglou, M., "Periodically Reversed Flow Regeneration of Diesel Particulate Traps," SAE Technical Paper 1999-01-0469, 1999, https://doi.org/10.4271/1999-01-0469.Also In
References
- Diesel Exhaust Aftertreatment 1997 SAE Special Publication
- Diesel Exhaust Aftertreatment 1998 SAE Special Publication
- Konstandopoulos, A.G. Gratz, L.D. Johnson, J.H. Bagley, S.T. Leddy, D.G. “Ceramic particulate traps for diesel emissions control-effects of a manganese-copper fuel additive” SAE Trans. 97 J. Engines Paper No. 880009 37 53 1988
- Konstandopoulos, A.G. Johnson, J.H. “Wall-flow diesel particulate filters-their pressure drop and collection efficiency” SAE Trans. 98 J. Engines Paper No. 890405 625 647 1989
- Larsen, C.A. Levendis, Y.A. “On the effectiveness and economy of operation of ART-EGR systems that reduce diesel emissions” SAE Tech. Paper 980537 1998
- Noirot, R. Gilot, P. Gadiou, R. Prado, G. “Control of soot emission by filtration and post combustion. A laboratory study of the regeneration of an organic particulate trap assisted by hydrocarbon injection” Combust. Sci. and Tech. 95 139 160 1994
- Roth, P. Eckhardt, T. Franz, B. Patschull, J. “H2O2-assisted regeneration of diesel particulate traps at typical exhaust gas temperatures” Combust. Flame 115 28 37 1998 Levendis, Y.A. Larsen C.A. “Use of Ozone enriched-air for diesel particulate trap regeneration” SAE Tech. Paper 99P-393
- Hawker, P. Myers, N. Huthwohl, G. Vogel, H.Th. Bates, B. Magnusson, L. Bronneberg, P. 1997 “Experience with a new particulate trap technology in Europe” SAE Tech. paper 970182 1997
- Murphy, M. J. Hillenbrand, L. J. Trayser, D. A. Wasser, J. H. “Assessment of diesel particulate control-direct and catalytic oxidation” SAE Tech. Paper 810112 1981
- Neeft, J.P.A. “Catalytic oxidation of soot; Potential for the reduction of diesel particulate emissions” Ph. D. Thesis Tech. Univ. Delft 247 1995
- Konstandopoulos, A.G. Kostoglou, M. “Periodically reversed flow regeneration of soot filters” Proc. 1st Mtg Greek Section of Comb. Inst. 317 322 1997
- Cottrell, F.G. U.S. Patent
- Matros, Yu. Sh. Catalytic Processes Under Unsteady State Conditions Elsevier New York 1989
- Eigenberger, G. Nieken, U. “Catalytic combustion with periodic flow reversal” Chem. Engng Sci. 43 2109 2115 1988
- Haynes, T. N. Georgakis C. Caram, S. H. “The design of reverse flow reactors for catalytic combustion systems” Chem. Engng Sci. 50 401 416 1995
- Wallace, K. Viljoen, H. J. “Modeling of a monolithic catalyst with reciprocating flow” AIChE J. 41 1229 1234 1995
- Bunimovich, G.A. Vernikoskaya, N.V. Strots, V.O. Balzhinimaev, B.S. Matros, Y.S. “SO2 oxidation in a reverse flow reactor: Influence of a Vanadium catalyst dynamic properties” Chem. Engng Sci. 50 565 580 1995
- Lai, H. Li, C. “Application of periodic reversal flow reactors to chemical heat pump systems based on solid/vapor non-catalytic reaction” Chem. Engng Sci. 51 2951 2957 1996
- Zagoruiko, A.N. Kostenko, O.V. Noskov, A.S. “Development of the adsorption-catalytic reverse process for incineration of volatile organic compounds in diluted waste gases” Chem. Engng Sci. 51 2989 2994 1996
- Gunill, F. Van de Beld, L. Westerterp, K.R. “Catalytic combustion of very lean mixtures in a reverse flow reactor using an internal electrical heater” Ind. Engng Chem. Res. 36 4198 4206 1997
- Hanamura, K. Bohda, K. Miyairi, Y. Echigo, R. “Heat engine with reciprocating super-adiabatic combustion in porous media” SAE Tech. Paper 970201 1997
- Hoffman, J.G. Echigo, R. Yoshida, H. Tada, S. “Experimental study on combustion in porous media with a reciprocating flow system” Combust. Flame 111 32 46 1997
- Strots, V.O. Bunimovich, G.A. Matros, Y.S. Zheng, M. Mirosh, E.A. “Novel catalytic converter for natural gas powered diesel engines” SAE Tech. Paper 980194 1998
- Konstandopoulos, A. G. Kostoglou, M. “Theory and practice of soot filter regeneration” 1998
- Bissett, E. J. “Mathematical model of the thermal regeneration of a wall-flow monolith diesel particulate filter” Chem. Eng. Sci. 39 1232 1244 1984
- Bissett, E. J. Shadman, F. “Thermal regeneration of diesel particulate monolithic filters” AlChE J. 31 753 758 1985
- Bissett, E. J. “Thermal regeneration of particle filters with large conduction” Math. Model. 8 1 18 1985
- Tognotti, L. Longwell J. P. Sarofim, A. F. 23rd Int. Symp. Comb. 1207 1990
- Ciambelli, P. Corbo, P. Gambino, M. Palma, V. Vaccaro, S. “Catalytic combustion of carbon particulate” Catalysis Today 27 99 106 1996
- Du, Z. Sarofim, A.F. Longwell, J.P. “Kinetic measurement and modeling of carbon oxidation” Energy & Fuels 5 214 221 1991
- Palotas, A.B. Rainey, L.C. Sarofim, A.F. Vander Sande, J.B. Giambeli, P. “Effect of oxidation on the microstructure of carbon blacks” Energy & Fuels 10 254 259 1996
- Ciambelli, P. D'Amore, M. Palma, V. Vaccaro, S. “Catalytic combustion of carbon particulate at high values of the carbon/catalyst mass ratio” 26 th International Symposium on Combustion Napoli, Italy 1996
- Broadbelt, L.J. Rekoske J.E. “Necessary levels of detail in microkinetic models of catalytic reactions on non-uniform surfaces” Chem. Engng Sci. 51 3337 3347 1996
- Rosner, D.E. Konstandopoulos, A.G. Tassopoulos, M. Mackowski, D.W. “Deposition dynamics of combustion generated particles: Summary of recent studies of particle transport mechanisms, capture rates and resulting deposit microstructure/properties” Inorganic Tranformations and Ash Deposition During Combustion Benson S.A. Engineering Foundation/ASME New York 585 606 1992
- Ahlstrom, A.F. Odenbrand, C.U.I. “Catalytic combustion of soot deposits from diesel engines” Applied Catalysis 60 143 156 1990
- Saracco, G. Serra, V. Badini, C. Specchia V. “Treatment of diesel particulate emissions by using mobile catalysts” Europ. Conf. Chem. Engng 1 Florence, Italy 489 492 1997
- Konstandopoulos, A.G. Kostoglou, M. “A mathematical model of soot oxidation on catalytically coated ceramic filters” Advances in Vehicle Control and Safety Amiens, France 137 143 1998
- Rosner, D.E. Tandon, P. Konstandopoulos, A.G. Tassopoulos, M. “Prediction/correlation of fine particle deposition rates from dilute polydispersed flowing suspensions, and the Nature/Properties of the resulting deposits” Proc. 1 st Int. Particle Technology Forum 3 AIChE New York 374 381 1994
- Tien, C. Granural Filtration of Aerosols and Hydrosols Butterworths Stoneham, MA 1989
- Pulkrabek, W.W. Ibele, W.E. “The effect of temperature on the permeability of a porous material” Int. J. Heat Mass Transfer 30 1103 1109 1987
- Press, W.H. Teukolsky, S.A. Vetterling, W.T. Flannery, B.P. Numerical Recipes. The art of scientific computing Second Cambridge University Press Cambridge 1992
- Tan, J. C Opris, C. N. Baumgard, K. J. Johnson, J. H. “A study of the regeneration process in diesel particulate traps using a Copper fuel additive” SAE Tech. Paper 960136 1996
- Park, D.S. Kim, J.U. Kim, E.S. “A burner type trap for particulate matter from a diesel engine” Combust. Flame 114 585 590 1998
- Stobbe, P. Petersen, H.G. Hoj, J.W. Sorenson, S.C. “SiC as a substrate for diesel particulate filters” SAE Tech. Paper 932495 1993