This content is not included in your SAE MOBILUS subscription, or you are not logged in.

A Predictive Tool to Evaluate Braking System Performance Using Thermo-Structural Finite Element Model

Published October 14, 2019 by SAE International in United States
A Predictive Tool to Evaluate Braking System Performance Using Thermo-Structural Finite Element Model
Sector:
Citation: Belhocine, A. and Wan Omar, W., "A Predictive Tool to Evaluate Braking System Performance Using Thermo-Structural Finite Element Model," SAE Int. J. Passeng. Cars - Mech. Syst. 12(3):183-210, 2019, https://doi.org/10.4271/06-12-03-0014.
Language: English

References

  1. Tang, J., Bryant, D. and Qi, H. Coupled CFD and FE Thermal Mechanical Simulation of Disc Brake, in Proceedings of Euro Brake Conference, Lille, France, 2014.
  2. Han, M.J., Lee, C.H., Park, T.W., Park, J.M. et al. , “Coupled Thermo-Mechanical Analysis and Shape Optimization for Reducing Uneven Wear of Brake Pads,” International Journal of Automotive Technology 18(6):1027-1035, 2017.
  3. Belhocine, A. and Ghazaly, N.M. , “Effects of Young’s Modulus on Disc Brake Squeal Using Finite Element Analysis,” International Journal of Acoustics and Vibration 31(3):292-300, 2016.
  4. Ishak, M.R., Abu Bakar, A.R., Belhocine, A., Taib, J.M. et al. , “Brake Torque Analysis of Fully Mechanical Parking Brake System: Theoretical and Experimental Approach,” Ingenieria Investigacion y Tecnologia 19(1):37-49, 2018.
  5. Choi, J.H. and Lee, I. , “Transient Thermoelastic Analysis of Disk Brakes in Frictional Contact,” Journal of Thermal Stresses 26(3):223-244, 2003.
  6. Choi, J.H. and Lee, I. , “Finite Element Analysis of Transient Thermoelastic Behaviors in Disk Brakes,” Wear 257(1-2):47-58, 2004.
  7. Yildiz, Y. and Duzgun, M. , “Stress Analysis of Ventilated Brake Discs Using the Finite Element Method,” International Journal of Automotive Technology 11(1):133-138, 2010.
  8. Duzgun, M. , “Investigation of Thermo-Structural Behaviors of Different Ventilation Applications on Brake Discs,” Journal of Mechanical Science and Technology 26(1):235-240, 2012.
  9. Pevec, M. , “Prediction of the Cooling Factors of a Vehicle Brake Disc and Its Influence on the Results of a Thermal Numerical Simulation,” International Journal of Automotive Technology 13(5):725-733, 2012.
  10. Hwang, P. and Wu, X. , “Investigation of Temperature and Thermal Stress in Ventilated Disc Brake Based on 3D Thermo-Mechanical Coupling Model,” Journal of Mechanical Science and Technology 24(1):81-84, 2010.
  11. Han, M.J., Lee, C.H., Park, T.W., and Lee, S.P. , “Low and High Cycle Fatigue of Automotive Brake Discs Using Coupled Thermo-Mechanical Finite Element Analysis under Thermal Loading,” Journal of Mechanical Science and Technology 32(12):5777-5784, 2018.
  12. Dufrénoy, P. and Weichert, D. , “Prediction of Railway Disc Brake Temperatures Taking the Bearing Surface Variations into Account,” Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 209(2):67-76, 1995.
  13. Palmer, E., Mishra, R., and Fieldhouse, J.D. , “An Optimization Study of a Multiple Row Pin Vented Brake Disc to Promote Brake Cooling Using Computational Fluid Dynamics,” Proceedings of the Institution of Mechanical Engineers, Part D, Journal of Automobile Engineering 223(7):865-875, 2009.
  14. Reimpel, J. , Braking Technology (Würzburg: Vogel Verlag, 1998).
  15. Cruceanu, C. , Frâne pentru vehicle feroviare (Brakes for Railway Vehicles) (Bucureşti: MATRIXROM, 2007), 388. ISBN:978-973-755-200-6.
  16. Dittrich, H. and Lang, R. , “Finite-Element Analysis of the Thermal Loads Acting on a Passenger Car Brake Disk,” Automobiltechnische Zeitschrift 86(6):265-269, 1984.
  17. Fukano, A. and Matsui, H. , “Development of Disc-Brake Design Method Using Computer Simulation of Heat Phenomena,” SAE Technical Paper 860634 , 1986, doi:10.4271/860634.
  18. Gotowicki, P.F., Nigrelli, V., Mariotti, G.V., Aleksendric, D. et al. , “Numerical and Experimental Analysis of a Pegs-Wing Ventilated Disk Brake Rotor with Pads and Cylinders,” in 10th EAEC European Automotive Congress, Paper EAEC05YUAS04-P5, June 2005.
  19. Khalid, M.K., Mansor, M.R., Abdul Kudus, S.I., Tahir, M.M. et al. , “Performance Investigation of the UTeM Eco-Car Disc Brake,” System International Journal of Engineering & Technology 11(6):1-6, 2011.
  20. Limpert, R. , Brake Design and Safety Second Edition (Warrendale, PA: Society of Automotive Engineering Inc., 1999), 137-144.
  21. Zhang, J. and Xia, C. , “Research of the Transient Temperature Field and Friction Properties on Disc Brakes,” in Proceedings of the 2012 2nd International Conference on Computer and Information Application (ICCIA 2012), Taiyuan, China, 2012, 201-204.
  22. Mackin, T.J., Noe, S.C., Ball, K.J., Bedell, B.C. et al. , “Thermal Cracking in Disc Brakes,” Engineering Failure Analysis 9:63-76, 2002.
  23. Oder, G., Reibenschuh, M., Lerher, T., Šraml, M. et al. , “Thermal and Stress Analysis of Brake Discs in Railway Vehicles,” Advanced Engineering 3(1):95-102, 2009, ISSN:1846-5900.
  24. Coudeyras, N. , “Non-Linear Analysis of Multiple Instabilities to the Rubbing Interfaces: Application to the Squealing of Brake,” Ph.D. thesis, Central School of Lyon-Speciality: Mechanics, Dec. 2009.
  25. Abu Bakar, A.R., Ouyang, H., Khai, L.C., and Abdullah, M.S. , “Thermal Analysis of a Disc Brake Model Considering a Real Brake Pad Surface and Wear,” International Journal of Vehicle Structures & Systems 2(1):20-27, 2010.
  26. Stephens, A. , “Aerodynamic Cooling of Automotive Disc Brakes,” Master’s thesis, School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University, Mar. 2006.
  27. Abu Bakar, A.R. , “Modelling and Simulation of Disc Brake Contact Analysis and Squeal,” Ph.D. thesis, Department of Engineering, University of Liverpool, 2005.

Cited By