Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Machining Performance Analysis in Electrical Discharge Machining of Alloy Tool Steel

Journal Article
05-16-01-0008
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-16-01-0008
Published November 30, 2022 by SAE International in United States
Machining Performance Analysis in Electrical Discharge Machining of Alloy Tool Steel
Sector:
Citation: Singh, P., Singh, A., and Singh, L., "Machining Performance Analysis in Electrical Discharge Machining of Alloy Tool Steel," SAE Int. J. Mater. Manf. 16(1):83-95, 2023, https://doi.org/10.4271/05-16-01-0008.
Language: English

References

  1. Kiran , K.L.U. , Reddy , G.C. , Prasad , A.M.K. , and Rajendra , R. Study of Surface Integrity Characteristics on Al and Die Steel Components Using Copper Tool in Sink EDM Process Int J Current Eng Technol 2 2014 236 241
  2. Rizvi , S. and Agarwal , S. An Investigation on Surface Integrity in EDM Process with a Copper Tungsten Electrode Proc CIRP 42 2016 612 617
  3. Narumiya , H. , Mohri , N. , Saito , N. , Otake , H. et al. EDM by Powder Suspended Working Fluid Proceedings of the 9th ISEM Nagoya, Japan 1989 5 8
  4. Mohri , N. , Saito , N. , Higashi , M. , and Kinoshita , N. A New Process of Finish Machining on Free Surface by EDM Methods Ann CIRP 40 1 1991 207 210
  5. Ming , Q.Y. and He , L.H. Powder-Suspension Dielectric Fluid for EDM J Mater Process Technol 52 1 1995 44 54
  6. Wang , P.J. and Tsai , K.M. Semi-Empirical Model on Work Removal and Tool Wear in Electrical Discharge Machining J Mater Process Technol 114 1 2001 1 17
  7. Mohan , B. , Rajadurai , A. , and Satyanarayana , K.G. Effect of SiC and Rotation of Electrode on Electric Discharge Machining of Al-SiC Composite J Mater Process Technol 124 3 2002 297 304
  8. Tzeng , Y.F. and Chen , F. A Simple Approach for Robust Design of High Speed Electrical Discharge Machining Technology Int J Mach Tools Manuf 43 3 2003 217 227
  9. Puertas , I. and Luis , C.J. Analysis of the Influence of EDM Parameters on Surface Quality—MRR and EW of WC-Co J Mater Process Technol 153-154 2004 1026 1032
  10. Kiyak , M. and Cakir , O. Examination of Machining Parameters on Surface Roughness in EDM of Tool Steel J Mater Process Technol 191 1-3 2007 141 144
  11. Lee , S.H. and Li , X.P. Study of the Effect of Machining Parameters on the Machining Characteristics in Electrical Discharge Machining of Tungsten Carbide J Mater Process Technol 115 3 2001 344 358
  12. Liu , Y.H. , Ji , R.J. , Li , X.P. , Yu , L.L. et al. Effect of Machining Fluid on the Process Performance of Electric Discharge Milling of Insulating Al 2 O 3 Ceramic Int J Mach Tools Manuf 48 9 2008 1030 1035
  13. Pradhan , M. 2010 http://ethesis.nitrkl.ac.in/2977/1/Thesis-Modified.pdf
  14. Li , J. , Liu , X. , and Zhao , S. Prediction Model of Recast Layer Thickness in Die-Sinking EDM Process on Ti-6Al-4V Machining through Response Surface Methodology Coupled with Least Squares Support Vector Machine Comp Model New Technol 18 7 2014 398 405
  15. Paul , T.R. , Majumder , H. , Dey , V. , and Dutta , P. Study the Effect of Material Removal Rate in Die Sinking EDM for Inconel 800 Using Response Surface Methodology J Mater Sci Mech Eng 2 9 2015 27 31
  16. Jeykrishnan , J. , Ramnath , B.V. , Elanchezhian , C. , and Akilesh , S. Parametric Analysis on Electrochemical Machining of SKD-12 Tool Steel Mater Today Proc 4 2 2017 3760 3766
  17. Jaiswal , V.K. , Paul , A. , Yadav , V. , and Singh , V. Experimental Investigation of Process Parameters on Inconel 925 for EDM Process by Using Taguchi Method Int J Sci Res Devel 6 5 2018 277 282
  18. Morankar , K. and Shelke , R. Optimization of Electrical Discharge Machining Process Parameters Using SCM420 Low Alloy Steel by Response Surface Methodology IOSR J Mech Civil Eng 14 1 2017 75 79
  19. Rajneesh , R. , Subhash , S. , Mulik , R.S. , and Kaushik , P. Study of Machining Performance in EDM through Response Surface Methodology Shanker , K. , Shankar , R. , and Sindhwani , R. Advances in Industrial and Production Engineering Singapore Springer 2019 207 219
  20. Mohanty , S.D. , Mahapatra , S.S. , Mohanty , R.C. , and Mohapatra , J. Optimization of Material Removal Rate in EDM of D2 Steel by Taguchi Method Int J Mech Prod Eng Res Devel 10 3 2020 2633 2642
  21. Kumar , A. and Sharma , R. Multi-Response Optimization of Magnetic Field Assisted EDM through Desirability Function Using Response Surface Methodology J Mech Behavior Mater 29 2020 19 35
  22. Pandey , P.C. and Shan , H.S. Modern Machining Processes New Delhi Tata McGraw-Hill 2004
  23. Montgomery , D.C. Design and Analysis of Experiments New York Wiley 2012
  24. Singh , P. and Singh , L. Examination and Optimization of Machining Parameters in Electrical Discharge Machining of UNS T30407 Steel J Adv Manuf Systems 21 3 2021 573 589 https://doi.org/10.1142/S0219686722500202
  25. Shather , S.K. , Aghdeab , S.H. , and Khudhier , W.S. Enhancement the Thermal Effects Produce by EDM Using Hybrid Machining IOP Conf Ser Mater Sci Eng 12 2019 1 12
  26. Panda , D.K. Study of Thermal Stresses Induced Surface Damage under Growing Plasma Channel in Electro-Discharge Machining J Mater Process Technol 202 2008 86 95
  27. Saha , S.K. and Choudhury , S.K. Experimental Investigation and Empirical Modelling of the Dry Electric Discharge Machining Process Int J Mach Tools Manuf 49 2009 297 308

Cited By