This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Optimization Study of the Effect of Manufacturing Tolerances on the Kinematic and Dynamic Performances of a Planar Mechanism
- Belkadi Noufel - University Setif 1, Applied Precision Mechanics Laboratory, Institute of Optics and Precision Mechanics, Algeria ,
- Djeddou Ferhat - University Setif 1, Applied Precision Mechanics Laboratory, Institute of Optics and Precision Mechanics, Algeria ,
- Smata Lakhdar - University Setif 1, Applied Precision Mechanics Laboratory, Institute of Optics and Precision Mechanics, Algeria ,
- Hosna Abdenour - University Setif 1, Applied Precision Mechanics Laboratory, Institute of Optics and Precision Mechanics, Algeria ,
- Hammoudi Abderazek - Mechanics Research Center (CRM), Algeria
Journal Article
05-16-01-0005
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Noufel, B., Ferhat, D., Lakhdar, S., Abdenour, H. et al., "Optimization Study of the Effect of Manufacturing Tolerances on the Kinematic and Dynamic Performances of a Planar Mechanism," SAE Int. J. Mater. Manf. 16(1):49-58, 2023, https://doi.org/10.4271/05-16-01-0005.
Language:
English
References
- Fogarasy , A.A. and Smith , M.R. The Influence of Manufacturing Tolerances on the Kinematic Performance of Mechanisms Proc. Instn. Mech. Eng. 212 1997 35 46
- Flores , P. A Methodology for Quantifying the Kinematic Position Errors due to Manufacturing and Assembly Tolerances Journal of Mechanical Engineering 57 2011 457 467
- Kumaraswamy , U. , Shunmugam , M.S. , and Sujatha , S. A Unified Framework for Tolerance Analysis of Planar and Spatial Mechanisms Using Screw theory Mech. Mach. Theory 69 2013 168 184
- Megahed , S.M. and Haroun , A.F. Analysis of the Dynamic Behavioral Performance of Mechanical Systems with Multiclearance Joints J. Comput. Nonlinear Dyn. 7 1 2012 011002
- Muvengei , O. , Kihiu , J. , and Ikua , B. Dynamic Analysis of Planar Rigid-Body Mechanical System with Two-Clearance Revolute Joints Nonlinear Dyn. 73 1-2 2013 259 273
- Zheng , E.I. and Zhou , X.I. Modeling and Simulation of Flexible Slider-Crank Mechanism with Clearance for a Closed High Speed Press System Mech. Mach. Theory 74 2014 10 30
- Li , Y. , Chen , G. , Sun , D. , Gao , Y. et al. Dynamic Analysis and Optimization Design of a Planar Slider-Crank Mechanism with Flexible Components and Two Clearance Joints Mech. Mach. Theory 99 2016 37 57
- Khemili , I. and Romdhan , L. Dynamic Analysis of Flexible Slider-Crank Mechanism with Clearance Eur. J. Mech. 27 5 2008 882 898
- Kolovsky , M.Z. et al. Advanced Theory of Mechanisms and Machines Berlin Springer 2000
- Urkaya , S. and Uzmay , I. Optimization of Transmission Angle for Slider-Crank Mechanism with Joint Clearances Struct. Multidiscip. Optim. 37 5 2009 493 508
- Sardashti , A. , Daniali , H.M. , and Varedi , S.M. Optimal Free-Defect Synthesis of Four-Bar Linkage with Joint Clearance Using PSO Algorithm Meccanica 48 2013 1681 1169
- Ting , K.-L. et al. Clearance-Induced Output Position Uncertainty of Planar Linkages with Revolute and Prismatic Joints Mech. Mach. Theory 111 2017 66 75
- Urkaya , S. and Uzmay , I. Determining Link Parameters Using Genetic Algorithm in Mechanisms with Joint Clearance Mech. Mach. Theory 44 2008 222 234
- Daniali , H.M. , Varedi , S.M. , Dardel , M. , and Fathi , A. A Novel Algorithm for Kinematic and Dynamic Optimal Synthesis of Planar Four-Bar Mechanisms with Joint Clearance Journal of Mechanical Science and Technology 29 5 2015 2059 2065
- Feng , B. , Morita , N. , and Torii , T. A New Optimization Method for Dynamic Design of Planar Mechanism with Clearances at Joints J. Mech. Des. 124 2002 68 73
- Zhang , Y. and Huang , X. Robust Tolerance Design for Function Generation Mechanism with Joint Clearances Mech. Mach. Theory 45 2010 1286 1297
- Dubowsky , S. and Freudenstein , F. Dynamic Analysis of Mechanical Systems with Clearances, Part 1: Formulation of Dynamic Model J. Eng. Ind. 93 1 1971 305 309
- Dubowsky , S. and Freudenstein , F. Dynamic Analysis of Mechanical Systems with Clearances, Part 2: Dynamic Response J. Eng. Ind. 93 1 1971 310 316
- Ting , K.L. , Zhu , J. , and Watkins , D. The Effects of Joint Clearance on Position and Orientation Deviation of Mechanisms and Manipulators Mech. Mach. Theory 35 2000 391 401
- Armillottra , A. Tolerance Analysis of Gear Trains by Static Analogy Mech Mach Theory 135 2019 65 80
- Armillottra , A. Concurrent Optimization of Dimensions and Tolerances on Structures and Mechanisms Adv. Manuf. Technol. 111 11 2020 3141 3157
- Kennedy , J. and Eberhart , R.C. Particle Swarm Optimization Proceedings of IEEE International Conference on Neural Networks 1995 1942 1948