This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Repairing Volume Defects of Al-Cu Alloy Joints by Active-Passive Filling Friction Stir Repairing

Journal Article
05-14-03-0016
ISSN: 1946-3979, e-ISSN: 1946-3987
Published November 12, 2020 by SAE International in United States
Repairing Volume Defects of Al-Cu Alloy Joints by Active-Passive Filling Friction Stir Repairing
Sector:
Citation: Islam, S., Khan, S., and Zahin, S., "Repairing Volume Defects of Al-Cu Alloy Joints by Active-Passive Filling Friction Stir Repairing," SAE Int. J. Mater. Manf. 14(3):245-258, 2021, https://doi.org/10.4271/05-14-03-0016.
Language: English

References

  1. Xu , W. , Liu , J. , Luan , G. , and Dong , C. Microstructure and Mechanical Properties of Friction Stir Welded Joints in 2219-T6 Aluminum Alloy Materials & Design 30 9 3460 3467 2009 https://doi.org/10.1016/j.matdes.2009.03.018
  2. Ji , S. , Huang , R. , Zhang , L. , Meng , X. et al. Microstructure and Mechanical Properties of Friction Stir Repaired Al-Cu Casting Alloy Transactions of the Indian Institute of Metals 71 8 2057 2065 2018 https://doi.org/10.1007/s12666-018-1340-x
  3. Mishra , R.S. and Ma , Z.Y. Friction Stir Welding and Processing Materials Science and Engineering: R: Reports 50 1-2 1 78 2005 https://doi.org/10.1016/j.mser.2005.07.001
  4. Wan , L. , Huang , Y. , Lv , Z. , Lv , S. et al. Effect of Self-Support Friction Stir Welding on Microstructure and Microhardness of 6082-T6 Aluminum Alloy joint Materials & Design 55 197 203 2014 https://doi.org/10.1016/j.matdes.2013.09.073
  5. Liu , H.J. , Li , J.Q. , and Duan , W.J. Friction Stir Welding Characteristics of 2219-T6 Aluminum Alloy Assisted by External Non-Rotational Shoulder The International Journal of Advanced Manufacturing Technology 64 9-12 1685 1694 2012 https://doi.org/10.1007/s00170-012-4132-1
  6. Delijaicov , S. , Yakabu , D.Y. , De Macedo , B. , Resende , H.B. et al. Characterization of the Surface and Mechanical Properties of the Friction Stir Welding in Tri-Dissimilar Joints with Aluminum Alloys and Titanium Alloy The International Journal of Advanced Manufacturing Technology 95 1-4 1339 1355 2017 https://doi.org/10.1007/s00170-017-1306-x
  7. Ji , S.D. , Meng , X.C. , Ma , L. , and Gao , S.S. Effect of Groove Distribution in Shoulder on Formation, Macrostructures, and Mechanical Properties of Pinless Friction Stir Welding of 6061-O Aluminum Alloy The International Journal of Advanced Manufacturing Technology 87 9-12 3051 3058 2016 https://doi.org/10.1007/s00170-016-8734-x
  8. Zhou , L. , Nakata , K. , Liao , J. , and Tsumura , T. Microstructural Characteristics and Mechanical Properties of Non-Combustive Mg-9Al-Zn-Ca Magnesium Alloy Friction Stir Welded Joints Materials & Design 42 505 512 2012 https://doi.org/10.1016/j.matdes.2012.06.005
  9. Gangwar , K. and Ramulu , M. Friction Stir Welding of Titanium Alloys: A Review Materials & Design 141 230 255 2018 https://doi.org/10.1016/j.matdes.2017.12.033
  10. Huang , Y. , Meng , X. , Wang , Y. , Xie , Y. et al. Joining of Aluminum Alloy and Polymer via Friction Stir Lap Welding Journal of Materials Processing Technology 257 148 154 2018 https://doi.org/10.1016/j.jmatprotec.2018.02.043
  11. Liu , H.J. , Chen , Y.C. , and Feng , J.C. Effect of Zigzag Line on the Mechanical Properties of Friction Stir Welded Joints of an Al-Cu Alloy Scripta Materialia 55 3 231 234 2006 https://doi.org/10.1016/j.scriptamat.2006.04.013
  12. Kim , Y.G. , Fujii , H. , Tsumura , T. , Komazaki , T. et al. Three Defect Types in Friction Stir Welding of Aluminum Die Casting Alloy Materials Science and Engineering: A 415 1-2 250 254 2006 https://doi.org/10.1016/j.msea.2005.09.072
  13. H-j , L. and H-j , Z. Repair Welding Process of Friction Stir Welding Groove Defect Transactions of Nonferrous Metals Society of China 19 3 563 567 2009 https://doi.org/10.1016/s1003-6326(08)60313-1
  14. Ji , S. , Meng , X. , Ma , L. , Lu , H. et al. Vertical Compensation Friction Stir Welding Assisted by External Stationary Shoulder Materials & Design 68 72 79 2015 https://doi.org/10.1016/j.matdes.2014.12.009
  15. Buffa , G. , Fratini , L. , and Micari , F. Mechanical and Microstructural Properties Prediction by Artificial Neural Networks in FSW Processes of Dual Phase Titanium Alloys Journal of Manufacturing Processes 14 3 289 296 2012 https://doi.org/10.1016/j.jmapro.2011.10.007
  16. Xu , W.F. , Luo , Y.X. , and Fu , M.W. Microstructure Evolution in the Conventional Single Side and Bobbin Tool Friction Stir Welding of Thick Rolled 7085-T7452 Aluminum Alloy Materials Characterization 138 48 55 2018 https://doi.org/10.1016/j.matchar.2018.01.051
  17. Ji , S.D. , Meng , X.C. , Huang , R.F. , Ma , L. et al. Microstructures and Mechanical Properties of 7N01-T4 Aluminum Alloy Joints by Active-Passive Filling Friction Stir Repairing Materials Science and Engineering: A 664 94 102 2016 https://doi.org/10.1016/j.msea.2016.03.131
  18. Dunkerton , S.B. , Nicholas , D.E. , and Sketchley , P.D. Repairing Defective Metal Workpiece—By Friction Welding with a Metal Plug Great Britain Patent 9125978 1991 1991
  19. Miles , M.P. , Feng , Z. , Kohkonen , K. , Weickum , B. et al. Spot Joining of AA 5754 and High Strength Steel Sheets by Consumable Bit Science and Technology of Welding and Joining 15 4 325 330 2013 https://doi.org/10.1179/136217110x12707333260491
  20. Huang , Y.X. , Han , B. , Lv , S.X. , Feng , J.C. et al. Interface Behaviours and Mechanical Properties of Filling Friction Stir Weld Joining AA 2219 Science and Technology of Welding and Joining 17 3 225 230 2013 https://doi.org/10.1179/1362171811y.0000000100
  21. Han , B. , Huang , Y. , Lv , S. , Wan , L. et al. AA7075 Bit for Repairing AA2219 Keyhole by Filling Friction Stir Welding Materials & Design 51 25 33 2013 https://doi.org/10.1016/j.matdes.2013.03.089
  22. Huang , Y.X. , Han , B. , Tian , Y. , Liu , H.J. et al. New Technique of Filling Friction Stir Welding Science and Technology of Welding and Joining 16 6 497 501 2013 https://doi.org/10.1179/1362171811y.0000000032
  23. Xiong , J. , Yang , X. , Lin , W. , and Liu , K. Evaluation of Inhomogeneity in Tensile Strength and Fracture Toughness of Underwater Wet Friction Taper Plug Welded Joints for Low-Alloy Pipeline Steels Journal of Manufacturing Processes 32 280 287 2018 https://doi.org/10.1016/j.jmapro.2018.02.016
  24. Reimann , M. , Goebel , J. , and dos Santos , J.F. Microstructure and Mechanical Properties of Keyhole Repair Welds in AA 7075-T651 Using Refill Friction Stir Spot Welding Materials & Design 132 283 294 2017 https://doi.org/10.1016/j.matdes.2017.07.013
  25. Zhou , L. , Liu , D. , Nakata , K. , Tsumura , T. et al. New Technique of Self-Refilling Friction Stir Welding to Repair Keyhole Science and Technology of Welding and Joining 17 8 649 655 2013 https://doi.org/10.1179/1362171812y.0000000058
  26. Huang , R. , Ji , S. , Meng , X. , and Li , Z. Drilling-Filling Friction Stir Repairing of AZ31B Magnesium Alloy Journal of Materials Processing Technology 255 765 772 2018 https://doi.org/10.1016/j.jmatprotec.2018.01.019
  27. Ji , S. , Meng , X. , Zeng , Y. , Ma , L. et al. New Technique for Eliminating Keyhole by Active-Passive Filling Friction Stir Repairing Materials & Design 97 175 182 2016 https://doi.org/10.1016/j.matdes.2016.02.088
  28. Wen , Q. , Guo , R. , Song , Q. , Dong , Z. et al. Active-Passive Filling Friction Stir Repairing of Casting Defects in ZL210 Aluminum Alloys The International Journal of Advanced Manufacturing Technology 106 11-12 5307 5315 2020 https://doi.org/10.1007/s00170-020-05026-1
  29. Hussain , A.K. and Quadri , Y.A.P. Evaluation of Parameters of Friction Stir Welding for Aluminium AA6351 Alloy International Journal of Engineering Science and Technology 2 10 5977 5984 2010
  30. Dai , X. , Zhang , H. , Liu , J. , and Feng , J. Microstructure and Properties of Mg/Al Joint Welded by Gas Tungsten Arc Welding-Assisted Hybrid Ultrasonic Seam Welding Materials & Design 77 65 71 2015 https://doi.org/10.1016/j.matdes.2015.03.054
  31. Li , W.Y. , Fu , T. , Hütsch , L. , Hilgert , J. et al. Effects of Tool Rotational and Welding Speed on Microstructure and Mechanical Properties of Bobbin-Tool Friction-Stir Welded Mg AZ31 Materials & Design 64 714 720 2014 https://doi.org/10.1016/j.matdes.2014.07.023
  32. Afrin , N. , Chen , D.L. , Cao , X. , and Jahazi , M. Microstructure and Tensile Properties of Friction Stir Welded AZ31B Magnesium Alloy Materials Science and Engineering: A 472 1-2 179 186 2008 https://doi.org/10.1016/j.msea.2007.03.018
  33. Buffa , G. , Donati , L. , Fratini , L. , and Tomesani , L. Solid State Bonding in Extrusion and FSW: Process Mechanics and Analogies Journal of Materials Processing Technology 177 1-3 344 347 2006 https://doi.org/10.1016/j.jmatprotec.2006.04.042
  34. Zhu , Y.Z. , Wang , S.Z. , Li , B.L. , Yin , Z.M. et al. Grain Growth and Microstructure Evolution Based Mechanical Property Predicted by a Modified Hall-Petch Equation in Hot Worked Ni76Cr19AlTiCo Alloy Materials & Design 55 456 462 2014 https://doi.org/10.1016/j.matdes.2013.10.023
  35. Zhang , Z.H. , Li , W.Y. , Feng , Y. , Li , J.L. et al. Improving Mechanical Properties of Friction Stir Welded AA2024-T3 Joints by Using a Composite Backplate Materials Science and Engineering: A 598 312 318 2014 https://doi.org/10.1016/j.msea.2014.01.047

Cited By