Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Investigation of Different Factors Influencing the Springback, Surface Roughness, and Thinning for Polyvinyl Chloride during Single Point Incremental Forming

Journal Article
05-13-03-0023
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-13-03-0023
Published July 29, 2020 by SAE International in United States
Investigation of Different Factors Influencing the Springback, Surface Roughness, and Thinning for Polyvinyl Chloride during Single Point Incremental Forming
Sector:
Citation: Patel, S., Kagzi, S., and Jain, P., "Investigation of Different Factors Influencing the Springback, Surface Roughness, and Thinning for Polyvinyl Chloride during Single Point Incremental Forming," SAE Int. J. Mater. Manf. 13(3):297-306, 2020, https://doi.org/10.4271/05-13-03-0023.
Language: English

References

  1. Min-Young , L. and Tae Gyun , C. Research Trends in Polymer Materials for Use in Lightweight Vehicles International Journal of Precision Engineering and Manufacturing 16 1 213 220 2015 https://doi.org/10.1007/s12541-015-0029-x
  2. Martins , P. , Bay , N. , Skjoedt , M. , and Silva , M.B. Theory of Single Point Incremental Forming CIRP Annals - Manufacturing Technology 2008 57 247 252 https://doi.org/10.1016/j.cirp.2008.03.047
  3. Wenbin , Z. , Jianguo , L. , Trevor , A.D. , and Liliang , W. Feasibility Studies of a Novel Extrusion Process for Curved Profiles: Experimentation and Modelling International Journal of Machine Tools and Manufacture 126 27 43 2017 https://doi.org/10.1016/j.ijmachtools.2017.12.001
  4. Wenbin , Z. , Jianguo , L. , Trevor , A.D. , and Liliang , W. Analysis and Modelling of a Novel Process for Extruding Curved Metal Alloy Profiles International Journal of Mechanical Sciences 138-139 524 536 2018 https://doi.org/10.1016/j.ijmecsci.2018.02.028
  5. Wenbin , Z. , Jianguo , L. , Trevor , A.D. , and Liliang , W. A Novel Application of Sideways Extrusion to Produce Curved Aluminium Profiles: Feasibility Study Procedia Engineering 207 2304 2309 2017 https://doi.org/10.1016/j.proeng.2017.10.999
  6. ul Hamad , H. , Fawad , M. , Alper , G. , Alexander , H. et al. Springback Prediction and Reduction in Deep Drawing under Influence of Unloading Modulus Degradation International Journal of Material Forming 9 619 633 2016 https://doi.org/10.1007/s12289-015-1248-5
  7. Hongyu , W. , Wenliang , C. , and Lin , G. Springback Investigation on Sheet Metal Incremental Formed Parts International Journal of Mechanical and Mechatronics Engineering, World Academy of Science, Engineering and Technology 5 1 285 289 2011 https://doi.org/10.5281/zenodo.1054841
  8. Prempreet , S. and Narinder , K. Experimental and Statistical Study on Spring-Back Behavior in Incremental Sheet Metal Forming Process International Journal of Innovative Research in Science, Engineering and Technology 4 9 8124 8130 2015 https://doi.org/10.15680/IJIRSET.2015.0409016
  9. Trey , N.C. , John , R.T. , and Ihab , R. Springback Induced in Single Point Incrementally Formed 2024-t3 Aluminum of Various Thicknesses ASME 2016 11th Int Manuf Sci Eng Conf MSEC 1 1 7 2016 https://doi.org/10.1115/MSEC2016-8805
  10. Zixuan , Z.H. , Zhang , Y. , Shi , N. , Moser , H. et al. Springback Reduction by Annealing for Incremental Sheet Forming Procedia Manufacturing 5 696 706 2016 https://doi.org/10.1016/j.promfg.2016.08.057
  11. Ankush , B. , Rakesh , L. , Sateesh , K.Y. , and Venkata , R.N. Prediction of Forming Forces in Single Point Incremental Forming Journal of Manufacturing Processes 28 3 486 493 2016 https://doi.org/10.1016/j.jmapro.2017.04.016
  12. Muhamad , K.S. , Frans , C. , Clare , D. , Subhieh , E.-S. et al. An Intelligent Process Model: Predicting Springback in Single Point Incremental Forming International Journal of Advances in Manufacturing Technology 76 2071 2082 2015 https://doi.org/10.1007/s00170-014-6431-1
  13. Martins , P.A.F. , Kwiatkowski , L. , Franzen , V. , Tekkaya , A.E. , and Kleiner , M. Single Point Incremental Forming of Polymers CIRP Annals - Manufacturing Technology 58 1 229 232 2009 https://doi.org/10.1016/j.cirp.2009.03.095
  14. Centeno , G. , Bagudanch , I. , Morales-Palma , D. , García-Romeu , M.,.L. et al. Recent Approaches for the Manufacturing of Polymeric Cranial Prostheses by Incremental Sheet Forming Procedia Engineering 183 180 187 2017 https://doi.org/10.1016/j.proeng.2017.04.059
  15. William , E.L. , Tyler , G.J. , Ihab , R. , and John , R.T. Optimum Process Parameters for Springback Reduction of Single Point Incrementally Formed Polycarbonate Procedia Manufacturing 10 329 338 2017 https://doi.org/10.1016/j.promfg.2017.07.002
  16. Mohammad , A. , Davarpanah , A. , Mirkouei , X. , Yu , R.M. , and Srikanth , P. Effects of Incremental Depth and Tool Rotation on Failure Modes and Microstructural Properties in Single Point Incremental Forming of Polymers Journal of Material Processing Technology 222 287 300 2015 https://doi.org/10.1016/j.jmatprotec.2015.03.014
  17. Marques , T.A. , Silva , M.B. , and Martins , P.A.F. On the Potential of Single Point Incremental Forming of Sheet Polymer Parts International Journal of Advanced Manufacturing Technology 60 1-4 75 86 2012 https://doi.org/10.1007/s00170-011-3585-y
  18. Silva , M.B. , Alves , L.M. , and Martins , P.A.F. Single Point Incremental Forming on PVC: Experimental Finding and Theoretical Interpretation European Journal of Mechanics A/Solids 29 557 566 2010 https://doi.org/10.1016/j.euromechsol.2010.03.008
  19. PVC Forum, South East Europe http://www.seepvcforum.com/en/content/54-what-makes-pvc-so-useful-in-vehicles 2020
  20. Medina-Sanchez , G. , Torres-Jimenez , E. , Lopez-Garcia , R. , Dorado-Vicente , R. , and Czalla-Moral Temperature Influence on Single Point Incremental Forming of PVC Parts Procedia Manufacturing 13 335 342 2017 https://doi.org/10.1016/j.promfg.2017.09.085
  21. Charles , W.E. , Charles , D.A. , and James , Summers W. PVC Handbook Munich, Germany Carl Hanser Publishers
  22. Minitab Help Manual https://support.minitab.com/en-us/minitab/18/help-and-how-to/modeling-statistics/anova/supporting-topics/anova-statistics/understanding-sums-of-squares/

Cited By