Try Mobilus Beta
Search tips
 This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Quench Rate Study on AA7075 with Advanced Aging and T6

Journal Article
05-13-03-0017
ISSN: 1946-3979, e-ISSN: 1946-3987
DOI: https://doi.org/10.4271/05-13-03-0017
Published July 21, 2020 by SAE International in United States
Quench Rate Study on AA7075 with Advanced Aging and T6
Sector:
Citation: Chen, Z., Kaunitz, L., and Wu, C., "Quench Rate Study on AA7075 with Advanced Aging and T6," SAE Int. J. Mater. Manf. 13(3):209-216, 2020, https://doi.org/10.4271/05-13-03-0017.
Language: English

References

  1. Omer , K. , Abolhasani , A. , Kim , S. , Nikdejad , T. et al. Process Parameters for Hot Stamping of AA7075 and D-7xxx to Achieve High Performance Aged Journal of Materials Processing Technology 257 170 179 2018 https://doi.org/10.1016/j.jmatprotec.2018.02.039
  2. Zhu , M.Y. , Zhu , B. , Liu , Y. , and Zhang , Y.S. Investigation on Quench Rate of 7075 Aluminum Alloy under Hot Stamping Conditions Advanced High Strength Steel and Press Hardening 404 409 2019 https://doi.org/10.1142/9789813277984_0060
  3. Liu , S. , Zhong , Q. , Zhang , Y. , Liu , W. et al. Investigation of Quench Sensitivity of High Strength Al-Zn-Mg-Cu Alloys by Time-temperature Temperature Properties Diagrams Materials & Design 31 6 3116 3120 2010 https://doi.org/10.1016/j.matdes.2009.12.038
  4. Kavalco , P.M. , Canale , L.C.F. , and Totten , G.E. Quenching of Aluminum Alloys: What This Key Step Accomplishes, Heat Treating ASM International 14 5 20 21 1982
  5. Fabian , H.G. and Wolter , R. Determination of The Effective Vacancy Concentrations and The Vacancy losses After The Quench of Al-Zn-Mg Alloys Crystal. Research. and Technology 26 1 93 102 1991 https://doi.org/10.1002/crat.2170260
  6. Totten , G.E. and MacKenzie , D.S. Handbook of Aluminum: Physical Metallurgy and Processes 1 New York Marcel Dekker Inc 2003 895 907
  7. Song , F. , Zhang , X. , Liu , S. , Tan , Q. , and Li , D. The Effect of Quench Rate and Overageing Temper on The Corrosion Behavior of AA7050 Corrosion Science 78 276 286 2014 https://doi.org/10.1016/j.corsci.2013.10.010
  8. Yang , B. , Milkereit , B. , Zhang , Y. , Rometsch , P.A. et al. Continuous Cooling Precipitation Diagram of Aluminum Alloy AA7150 Based on a New Fast Scanning Calorimetry and Interrupted Quenching Method Materials Characterization 12 30 37 2016 https://doi.org/10.1016/j.matchar.2016.08.016
  9. Behrens , B.A. , Nurnberger , F. , Bonk , C. , Hubner , S. et al. Influences on the Formability and Mechanical Properties of 7000-Aluminum Aluminum Alloys in Hot and Warm Forming Journal of Physics: Conf. Series 896 012004 2017 https://doi.org/10.1088/1742-6596/896/1/012004
  10. Li , S. , Dong , H. , Wang , X. , and Liu , Z. Quenching Sensitivity of Al-Zn-Mg Alloy after Non-Isothermal Heat Treatment Materials 12 10 1595 2019 https://doi.org/10.3390/ma12101595
  11. Westermann , I. , Haugstad , A.L. , Langsrud , Y. , and Marthinsen , K. Effect of Quenching Rate on Microstructure and Mechanical Properties of Commercial AA7108 Aluminum Alloy Transactions of Nonferrous Metals Society of China 22 8 1872 1877 2012 https://doi.org/10.1016/s1003-6326(11)61400-3
  12. Keci , A. , Harrison , N. , and Luckey , S. Experimental Evaluation of the Quench Rate of AA7075 SAE Technical Paper 2014-01-0984 2014 https://doi.org/10.4271/2014-01-0984
  13. ASM Handbook Heat Treating of Aluminum Alloys, Heat Treating 4 West Conshohocken, PA ASM International 1991 841 879
  14. ASTM G110-92 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution West Conshohocken, PA ASTM International 2015
  15. Harrison , N. and Luckey , S. Hot Stamping of a B-Pillar Outer from High Strength Aluminum Sheet AA7075 SAE Int. J. Mater. Manf. 7 3 567 573 2014 https://doi.org/10.4271/2014-01-0981
  16. Fourmeau , M. , Marioara , C.D. , Børvik , T. , Benallal , A. , and Hopperstad , O.S. A Study of The Influence of Precipitate-Free Zones on The Strain Localization and Failure of The Aluminum Alloy AA7075-T65 Philosophical Magazine 95 28-30 3278 3304 2015 https://doi.org/10.1080/14786435.2015.1040099
  17. Doig , P. and Edington , J.W. Influence of Precipitate Free Zones on the Stress Corrosion Susceptibility of a Ternary Al-5.9 Wt% Zn-3.2 Wt% Mg Alloy Corrosion 31 10 347 352 1975 https://doi.org/10.5006/0010-9312-31.10.347
  18. Park , J.K. and Ardell , A.J. Microchemical Analysis of Precipitate Free Zones in 7075-A1 in The T6, T7 and RRA Acta Metallurgica et Materialia 39 4 591 598 1991 https://doi.org/10.1016/0956-7151(91)90127-m
  19. Kumar , P.V. , Reddy , G.M. , and Rao , K.S. Microstructure, Mechanical and Corrosion Behavior of High Strength AA7075 Aluminum Alloy Friction Stir Welds - Effect of Post Weld Heat Treatment Defense Technology 11 4 362 369 2015 https://doi.org/10.1016/j.dt.2015.04.003
  20. Chen , Z. , Kaunitz , L. , Saltzmann , D. , and Wu , C. Effects of Heat-Treatment on Exfoliation Corrosion (EXCO), Intergranular Corrosion (IGC), Stress Corrosion Cracking (SCC), Joining Corrosion of AA7075 with Advanced Aging and T6 SAE Journal of Materials and Manufacturing 2020

Cited By