This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Effect of Shot Peening Conditions on the Fatigue Life of Additively Manufactured A357.0 Parts
Journal Article
05-13-02-0009
ISSN: 1946-3979, e-ISSN: 1946-3987
Sector:
Topic:
Citation:
Gatto, A., Sola, A., and Tognoli, E., "Effect of Shot Peening Conditions on the Fatigue Life of Additively Manufactured A357.0 Parts," SAE Int. J. Mater. Manf. 13(2):125-137, 2020, https://doi.org/10.4271/05-13-02-0009.
Language:
English
References
- Oerlikon 2017 https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=2ahUKEwiG0cnNkuTjAhVMJlAKHdd-AY0QFjAAegQIARAC&url=https%3A%2F%2Fwww.oerlikon.com%2Fecoma%2Ffiles%2FOerlikon-AM-Factsheet_II.pdf%3Fdownload%3D1&usg=AOvVaw0Rc5hTez5OO9RZX_UXb8ia
- Sanz , C. and García Navas , V. Structural Integrity of Direct Metal Laser Sintered Parts Subjected to Thermal and Finishing Treatments Journal of Materials Processing Technology 213 2126 2136 2013 https://doi.org/10.1016/j.jmatprotec.2013.06.013
- Brandl , E. , Heckenberger , U. , Holzinger , V. , and Buchbinder , D. Additive Manufactured AlSi10Mg Samples Using Selective Laser Melting (SLM): Microstructure, High Cycle Fatigue, and Fracture Behavior Materials & Design 34 159 169 2012 https://doi.org/10.1016/j.matdes.2011.07.067
- Aboulkhair , N.T. , Maskery , I. , Tuck , C. , Ashcroft , I. et al. Improving the Fatigue Behaviour of a Selectively Laser Melted Aluminium Alloy: Influence of Heat Treatment and Surface Quality Materials & Design 104 174 182 2016 https://doi.org/10.1016/j.matdes.2016.05.041
- Uzan , N.E. , Shneck , R. , Yeheskel , O. , and Frage , N. Fatigue of AlSi10Mg Specimens Fabricated by Additive Manufacturing Selective Laser Melting (AM-SLM) Materials Science and Engineering A 704 229 237 2017 https://doi.org/10.1016/j.msea.2017.08.027
- Uzan , N.E. , Ramati , S. , Shneck , R. , Frage , N. et al. On the Effect of Shot-Peening on Fatigue Resistance of AlSi10Mg Specimens Fabricated by Additive Manufacturing Using Selective Laser Melting (AM-SLM) Additive Manufacturing 21 458 464 2018 https://doi.org/10.1016/j.addma.2018.03.030
- Bassoli , E. , Denti , L. , Comin , A. , Sola , A. et al. Fatigue Behavior of As-Built L-PBF A357.0 Parts Metals 8 8 634 2018 https://doi.org/10.3390/met8080634
- Gatto , A. , Bassoli , E. , Denti , L. , Sola , A. et al. Effect of Three Different Finishing Processes on the Surface Morphology and Fatigue Life of A357.0 Parts Produced by Laser-Based Powder Bed Fusion Advanced Engineering Materials 21 11 2019 https://onlinelibrary.wiley.com/doi/10.1002/adem.201801357
- Xiong , W. , Hao , L. , Li , Y. , Tang , D. et al. Effect of Selective Laser Melting Parameters on Morphology, Microstructure, Densification and Mechanical Properties of Supersaturated Silver Alloy Materials and Design 170 107697 2019 https://doi.org/10.1016/j.matdes.2019.107697
- Fousova , M. , Dvorsky , D. , Vronka , M. , Vojtech , D. et al. The Use of Selective Laser Melting to Increase the Performance of AlSi 9 Cu 3 Fe Alloy Materials 11 1918 2018 https://doi.org/10.3390/ma11101918
- Aversa , A. , Marchese , G. , Saboori , A. , Bassini , E. et al. New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review Materials 12 7 1007 2019 https://doi.org/10.3390/ma12071007
- Kempen , K. , Yasa , E. , Thijs , L. , Kruth , J.-P. et al. Microstructure and Mechanical Properties of Selective Laser Melted 18Ni-300 Steel Physics Procedia 12 255 263 2011 https://doi.org/10.1016/j.phpro.2011.03.033
- Mengucci , P. , Barucca , G. , Gatto , A. , Bassoli , E. et al. Effects of Thermal Treatments on Microstructure and Mechanical Properties of a Co-Cr-Mo-W Biomedical Alloy Produced by Laser Sintering Journal of the Mechanical Behavior of Biomedical Materials 60 106 117 2016 https://doi.org/10.1016/j.jmbbm.2015.12.045
- Herzog , D. , Seyda , V. , Wycisk , E. , and Emmelmann , C. Additive Manufacturing of Metals Acta Materialia 117 371 392 2016 https://doi.org/10.1016/j.actamat.2016.07.019
- Bassoli , E. , Sola , A. , Celesti , M. , Calcagnile , S. et al. Development of Laser-Based Powder Bed Fusion Process Parameters and Scanning Strategy for New Metal Alloy Grades: A Holistic Method Formulation Materials 11 2356 2018 https://doi.org/10.3390/ma11122356
- Sercombe , T.B. and Li , X. Selective Laser Melting of Aluminium and Aluminium Metal Matrix Composites: Review Materials Technology 31 77 85 2016 https://doi.org/10.1179/1753555715Y.0000000078
- Rosenthal , I. , Stern , A. , and Frage , N. Microstructure and Mechanical Properties of AlSi10Mg Parts Produced by the Laser Beam Additive Manufacturing (AM) Technology Metallography, Microstructure, and Analysis 3 448 453 2014 https://doi.org/10.1007/s13632-014-0168-y
- Ding , Y. , Muñiz-Lerma , J.A. , Trask , M. , Chou , S. et al. Microstructure and Mechanical Property Considerations in Additive Manufacturing of Aluminum Alloys MRS Bulletin 41 745 751 2016 https://doi.org/10.1557/mrs.2016.214
- AlMangour , B. and Yang , J.-M. Improving the Surface Quality and Mechanical Properties by Shot-Peening of 17-4 Stainless Steel Fabricated by Additive Manufacturing Materials & Design 110 914 924 2016 https://doi.org/10.1016/j.matdes.2016.08.037
- Jain , A. A Database for Shot Peening Parameters and Desired Residual Stress Distribution International Conference on Shot Peening and Blast Cleaning Bhopal, India 2001
- Denti , L. Additive Manufactured A357.0 Samples Using the Laser Powder Bed Fusion Technique: Shear and Tensile Metals 8 670 2018 https://doi.org/10.3390/met8090670
- Kaufman , J.G. Understanding Wrought and Cast Aluminum Alloy Designations Introduction to Aluminum Alloys and Tempers Materials Park, OH ASM International 2000 23 37
- Kaufman , J.G. and Rooy , E.L. Aluminum Alloy Castings: Properties, Processes, and Applications Materials Park, OH ASM International 2004
- Dawes , J. , Bowerman , R. , and Trepleton , R. Introduction to the Additive Manufacturing Powder Metallurgy Supply Chain Johnson Matthey Technology Review 59 243 256 2015 https://doi.org/10.1595/205651315X688686
- Pyttel , B. , Schwerdt , D. , and Berger , C. Very High Cycle Fatigue - Is There a Fatigue Limit? International Journal of Fatigue 33 49 58 2011 https://doi.org/10.1016/j.ijfatigue.2010.05.009
- Sakai , T. Review and Prospects for Current Studies on Very High Cycle Fatigue of Metallic Materials for Machine Structural Use Journal of Solid Mechanics and Materials Engineering 3 425 439 2009 https://doi.org/10.1299/jmmp.3.425
- European Committee for Standardization 2010
- Mower , T.M. and Long , M.J. Mechanical Behavior of Additive Manufactured, Powder-Bed Laser-Fused Materials Materials Science and Engineering A 651 198 213 2016 https://doi.org/10.1016/j.msea.2015.10.068
- Intensity Review The Shot Peener 23 Spring 4 2009 https://www.theshotpeenermagazine.com/wp-content/uploads/tsp23no2.pdf
- Bagherifard , S. , Ghelichi , R. , and Guagliano , M. On the Shot Peening Surface Coverage and Its Assessment by Means of Finite Element Simulation: A Critical Review and Some Original Developments Applied Surface Science 259 186 194 2012 https://doi.org/10.1016/j.apsusc.2012.07.017
- Champaign , J. Shot Peening Intensity Measurement The Shot Peener 6 Winter 1 6 1992/93 https://www.shotpeener.com/library/pdf/1992082.pdf
- ®
- Guagliano , M. Relating Almen Intensity to Residual Stresses Induced by Shot Peening: A Numerical Approach Journal of Materials Processing Technology 110 277 286 2001 https://doi.org/10.1016/S0924-0136(00)00893-1
- Luong , H. and Hill , M.R. The Effects of Laser Peening and Shot Peening on High Cycle Fatigue in 7050-T7451 Aluminum Alloy Materials Science and Engineering A 527 699 707 2010 https://doi.org/10.1016/j.msea.2009.08.045
- ISO 4287:1997 1997
- ISO 4288:1996 1996
- ISO 25178-603:2013 2013
- ISO 16610-21:2011 2011
- Townsend , A. , Senin , N. , Blunt , L. , Leach , R.K. et al. Surface Texture Metrology for Metal Additive Manufacturing: A Review Precision Engineering 46 34 47 2016 https://doi.org/10.1016/j.precisioneng.2016.06.001
- Lou , S. , Jiang , X. , Sun , W. , Zeng , W. et al. Characterisation Methods for Powder Bed Fusion Processed Surface Topography Precision Engineering 57 1 15 2019 https://doi.org/10.1016/j.precisioneng.2018.09.007
- Fox , J.C. , Moylan , S.P. , Lane , B.M. , Whitenton , B.M. et al. Preliminary Study toward Surface Texture as a Process Signature in Laser Powder Bed Fusion Additive Manufacturing 2016 Summer Topical Meeting: Dimensional Accuracy and Surface Finish in Additive Manufacturing Rayleigh, NC 2016
- Zygo Jan. 2017
- Downey , T.J.G. , Martin , P. , Sedlaček , M. , and Beaulieu , L.Y. A Computational Analysis of the Application of Skewness and Kurtosis to Corrugated and Abraded Surfaces Quarterly Physics Review 3 2017 https://journals.ke-i.org/index.php/qpr/article/view/1169
- Aversa , A. , Lorusso , M. , Trevisan , F. , Ambrosio , E.P. et al. Effect of Process and Post-process Conditions on the Mechanical Properties of an A357 Alloy Produced via Laser Powder Bed Fusion Metals 8 68 2017 https://doi.org/10.3390/met7020068
- Mehmood , A. and Hammouda , M.M.I. Effect of Shot Peening on the Fatigue Life of 2024 Aluminum Alloy Failure of Engineering Materials & Structures, FEMS 2007 http://web.uettaxila.edu.pk/uet/FEMS(2007)/FullPapers/paper02.pdf
- Warmuzek , M. Aluminum-Silicon Casting Alloys: Atlas of Microfractographs Materials Park, OH ASM International 2004
- Aboulkhair , N.T. , Simonelli , M. , Parry , L. , Ashcroft , I. et al. 3D Printing of Aluminium Alloys: Additive Manufacturing of Aluminium Alloys Using Selective Laser Melting Progress in Materials Science 106 100578 2019 https://doi.org/10.1016/j.pmatsci.2019.100578
- Yan , C. , Hao , L. , Hussein , A. , Young , P. et al. Microstructure and Mechanical Properties of Aluminium Alloy Cellular Lattice Structures Manufactured by Direct Metal Laser Sintering Materials Science and Engineering A 628 238 246 2015 https://doi.org/10.1016/j.msea.2015.01.063
- Takata , N. , Kodaira , H. , Sekizawa , K. , Suzuki , A. et al. Change in Microstructure of Selectively Laser Melted AlSi10Mg Alloy with Heat Treatments Materials Science & Engineering A 704 218 228 2017 https://doi.org/10.1016/j.msea.2017.08.029
- Trevisan , F. , Calignano , F. , Lorusso , M. , Pakkanen , J. et al. On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties Materials 10 76 2017 https://doi.org/10.3390/ma10010076