This content is not included in your SAE MOBILUS subscription, or you are not logged in.

Industrial Framework for Identification and Verification of Hot Spots in Automotive Composite Structures

Published May 16, 2019 by SAE International in United States
Industrial Framework for Identification and Verification of Hot Spots in Automotive Composite Structures
Citation: Molker, H., Gutkin, R., and Asp, L., "Industrial Framework for Identification and Verification of Hot Spots in Automotive Composite Structures," SAE Int. J. Mater. Manf. 12(2):107-120, 2019,
Language: English


  1. Mac Neal, R.H. , “The Evolution of Lower Order Plate and Shell Elements in MSC/NASTRAN,” Finite Element Analysis and Design 5:197-222, 1989, doi:10.1016/0168-874X(89)90044-9.
  2. Nagel, R.N., Braithwaite, W.W., and Kennicott, P.R. , “Initial Graphics Exchange Specification IGES Version 1.0,” Nagel, Roger N. Internet Archive, 1980.
  3. Car Crash Simulation|Make Software, Change the World!|Computer History Museum , n.d., (accessed March 18, 2019).
  4. Benson D.J , “The History of LS-DYNA®,” 2006, Livermore Software Technology Corporation, (accessed Mar. 21, 2019).
  5. Mindlin, R. , “Influence of Rotatory Inertia and Shear on Flexural Motions of Isotropic, Elastic Plates,” ASME Journal of Applied Mechanics 18:31-38, 1951.
  6. A.E.H., L. , “On the Small Free Vibrations and Deformations of Elastic Shells,” Philosophical Transcription of the Royal Society 17:491-549, 1888.
  7. Bru, T., Hellström, P., Gutkin, R., Ramantani, D. et al. , “Characterisation of the Mechanical and Fracture Properties of a Uni-Weave Carbon Fibre/Epoxy Non-crimp Fabric Composite,” Data in Brief 6:680-695, 2016, doi:10.1016/j.dib.2016.01.010.
  8. Paul, P.C., Saff, C.R., Sanger, K.B., Mahler, M.A. et al. , “Out of Plane Analysis for Composite Structures,” in 8th Department of Defence (NASA) FAA Conference on Fibrous Composite in Structural Design Part 1, NASA Technical Report N92-32527, NASA Langley Research Center, 1990, 263-279.
  9. Olsson, R. , “Experimental Observations on the Orthotropic Transverse Strength of Non-Crimp Fabrics Composites [TN15006],” Piteå, 2015.
  10. Molker, H., Gutkin, R., Pinho, S., and Asp, L.E. , “Hot Spot Analysis in Complex Composite Material Structures,” Composite Structures 207:776-786, 2019, doi:10.1016/J.COMPSTRUCT.2018.09.088.
  11. Rouchon, J. , “Certification of Large Airplane Composite Structures, Recent Progress and New Trends in Compliance Philosophy,” in Proceeding 17th ICAS Conference, Stockholm, Sweden, 1990, 2, 1439-1447.
  12. Ostergaard, M.G., Ibbotson, A.R., Roux, O.L., and Prior, A.M. , “Virtual Testing of Aircraft Structures,” CEAS Aeronautical Journal 1:83-103, 2011, doi:10.1007/s13272-011-0004-x.
  13. “Ansa Pre Processor Users Guide. 18.0.x,” Luzern: BETA CAE Systems, 2017.
  14. “Meta Post Processor Users Guide. 18.0.x,” Luzern: BETA CAE Systems, 2017.
  15. “ABAQUS Documentation. 6.14,” Providence, RI, USA: Dassault Systèmes, 2014.
  16. Jackson, W.C. and Martin, R.H. , “An Interlaminar Tensile Strength Specimen,” NASA Technical Report 19960026751, 1993.
  17. Soden, P.D., Hinton, M.J., and Kaddour, A.S. , “Lamina Properties, Lay-Up Configurations and Loading Conditions for a Range of Fibre-Reinforced Composite Laminates,” Composite Science & Technology 58:1011-1022, 1998, doi:10.1016/S0266-3538(98)00078-5.
  18. Stelzmann, U. and Hörmann, M. , “Ply-Based Composite Modeling with the New *ELEMENT_SHELL_COMPOSITE Keyword,” in Proceeding 8th European LS-DYNA Users Conference, Strasbourg, 2011.
  19. Klintworth, J. and Long, A.C. , “The Use of Draping Simulation in Composite Design,” . In: Long A.C. , editor. Composites Forming Technology. First Edition. (Cambridge, Woodhead Publishing, 2007), 277-292, doi:10.1533/9781845692537.277.
  20. Rolfes, R., Rohwer, K., and Ballerstaedt, M. , “Efficient Linear Transverse Normal Stress Analysis of Layered Composite Plates,” Computers and Structures 68:643-652, 1998, doi:10.1016/S0045-7949(98)00097-2.
  21. Pinho, S., Darvizeh, R., Robinson, P., Schuecker, C. et al. , “Material and Structural Response of Polymer-Matrix Fibre-Reinforced Composites,” Journal of Composite Materials 46:2313-2341, 2012, doi:10.1177/0021998312454478.
  22. Cuntze, R. , “The Predictive Capability of Failure Mode Concept-Based Strength Conditions for Laminates Composed of Unidirectional Laminae under Static Triaxial Stress States,” Journal of Composite Materials 46:2563-2594, 2012, doi:10.1177/0021998312449894.
  23. Carrere, N., Laurin, F., and Maire, J.-F. , “Micromechanical-Based Hybrid Mesoscopic Three-Dimensional Approach for Non-linear Progressive Failure Analysis of Composite Structures-Part B: Comparison with Experimental Data,” Journal of Composite Materials 47:743-762, 2012, doi:10.1177/0021998312460558.
  24. Kaddour, A.S. and Hinton, M.J. , “Maturity of 3D Failure Criteria for Fibre-Reinforced Composites: Comparison between Theories and Experiments: Part B of WWFE-II,” Journal of Composite Materials 47:925-966, 2013, doi:10.1177/0021998313478710.
  25. Molker, H., Wilhelmsson, D., Gutkin, R., and Asp, L.E. , “Orthotropic Criteria for Transverse Failure of Non-Crimp Fabric-Reinforced Composites,” Journal of Composite Materials 50:2445, 2016, doi:10.1177/0021998315605877.
  26. Hashin, Z. , “Failure Criteria for Unidirectional Fiber Composites,” Journal of Applied Mechanics 47:329-334, 1980, doi:10.1115/1.3153664.
  27. “ABAQUS Documentation. 5.8,” Pawtucket, RI, USA: Hibbit, Karlsson & Sorensen Inc., 1998.
  28. Gigliotti, L. and Pinho, S.T. , “Multiple Length/Time-Scale Simulation of Localized Damage in Composite Structures Using a Mesh Superposition Technique,” Composite Structures 121:395-405, 2015, doi:10.1016/j.compstruct.2014.11.005.
  29. Möller, C. and Sundlo, O. , “Method for Merging Scales in Finite Element Analyses-Framework for Automated Global/Local Analyses,” Chalmers University of Technology, 2017.
  30. Molker, H., Gutkin, R., and Asp, L.E. , “Verification of Hot-Spot in Complex Composite Structures Using Detailed FEA,” in Proceeding ECCM18-18th European Conference on Composite Materials, Athens, Greece, 2018.
  31. Department of Defence , Composite Materials Handbook, MIL-HDBK-17-1F (2002).
  32. Charrier, J.-S., Laurin, F., Carrere, N., and Mahdi, S. , “Determination of the Out-of-Plane Tensile Strength Using Four-Point Bending Tests on Laminated L-Angle Specimens with Different Stacking Sequences and Total Thicknesses,” Composite Part A-Applied Science and Manufacturing 81:243-253, 2016, doi:10.1016/j.compositesa.2015.11.018.
  33. Molker, H., Gutkin, R., and Asp, L.E. , “Implementation of Failure Criteria for Transverse Failure of Orthotropic Non-Crimp Fabric Composite Materials,” Composite Part A-Applied Science and Manufacturing 92, 2017, doi:10.1016/j.compositesa.2016.09.021.

Cited By