This content is not included in
your SAE MOBILUS subscription, or you are not logged in.
Improving the Engine Lubrication and Friction with Spherical Dimples of Partial Textures Optimized on Crankpin Bearing Surface
- Dengke Ni - Hubei Polytechnic University, School of Mechanical and Electrical Engineering, China Hubei Polytechnic University, Hubei Key Laboratory of Intelligent Conveying Technology and Device, China ,
- Vanliem Nguyen - Hubei Polytechnic University, School of Mechanical and Electrical Engineering, China Hubei Polytechnic University, Hubei Key Laboratory of Intelligent Conveying Technology and Device, China ,
- Huan Yuan - Hubei Polytechnic University, School of Mechanical and Electrical Engineering, China Hubei Polytechnic University, Hubei Key Laboratory of Intelligent Conveying Technology and Device, China
Journal Article
04-15-03-0013
ISSN: 1946-3952, e-ISSN: 1946-3960
Sector:
Topic:
Citation:
Ni, D., Nguyen, V., and Yuan, H., "Improving the Engine Lubrication and Friction with Spherical Dimples of Partial Textures Optimized on Crankpin Bearing Surface," SAE Int. J. Fuels Lubr. 15(3):265-275, 2022, https://doi.org/10.4271/04-15-03-0013.
Language:
English
References
- Etsion , I. Modeling of Surface Texturing in Hydrodynamic Lubrication Friction 1 2013 195 209
- Gropper , D. , Wang , L. , and Harvey , J. Hydrodynamic Lubrication of Textured Surfaces: A Review of Modeling Techniques and Key Findings Tribology International 94 2016 509 529 https://doi.org/10.1016/j.triboint.2015.10.009
- Rosenkranz , A. , Costa , H. , Profito , F. et al. Influence of Surface Texturing on Hydrodynamic Friction in Plane Converging Bearings—An Experimental and Numerical Approach Tribology International 134 2019 190 204 https://doi.org/10.1016/j.triboint.2019.01.042
- Zhang , H. , Hua , M. et al. Optimization of Texture Shape Based on Genetic Algorithm under Unidirectional Sliding Tribology International 115 2017 222 232 https://doi.org/10.1016/j.triboint.2017.05.017
- Grützmacher , P. , Profito , P. , and Rosenkranz , A. Multi-Scale Surface Texturing in Tribology-Current Knowledge and Future Perspectives Lubricants 7 2019 95 https://doi.org/10.3390/lubricants7110095
- Kovalchenko , A. , Ajayi , O. et al. The Effect of Laser Surface Texturing on Transitions in Lubrication Regimes during Unidirectional Sliding Contact Tribology International 38 2005 219 225 https://doi.org/10.1016/j.triboint.2004.08.004
- Zhang , J. , Yang , D. , Rosenkranz , A. et al. Laser Surface Texturing of Stainless Steel-Effect of Pulse Duration on Texture’s Morphology and Frictional Response Adv Eng Mater 21 2018 1801016 https://doi.org/10.1002/adem.201801016
- Zhang , J. , Zhang , J. , Rosenkranz , A. et al. Surface Textures Fabricated by Laser Surface Texturing and Diamond Cutting-Influence of Texture Depth on Friction and Wear Adv Eng Mater 20 4 2018 1700995 https://doi.org/10.1002/adem.201700995
- Jiao , R. , Van , L. , Le , V. et al. Optimal Design of Micro-Dimples on Crankpin Bearing Surface for Improving Engine’s Lubrication and Friction Industrial Lubrication and Tribology 73 2021 52 59 https://doi.org/10.1108/ilt-04-2020-0152
- Wang , P. , Nguyen , V. , Wu , X. , Wang , S. et al. Research on Different Structures of Dimpled Textures on Improving the LE-FPL of Engine Industrial Lubrication and Tribology 73 2021 545 553 https://doi.org/10.1108/ILT-07-2020-0286
- Wang , X. , Zhang , J. , and Dong , H. Analysis of Bearing Lubrication under Dynamic Loading Considering Micropolar and Cavitating Effects Tribology International 44 2011 1071 1075 https://doi.org/10.1016/j.triboint.2011.05.002
- Guo , X. , Han , Y. , Wang , J. et al. Coupling Transient Mixed Lubrication and Wear for Journal Bearing Modeling Tribology International 138 2019 1 15 https://doi.org/10.1016/j.triboint.2019.05.011
- Hua , W. , Nguyen , V. , and Le , V. Analysis of Dimensions of Surface Textures on Lubrication and Friction of an Engine SAE Int. J. Engines 15 1 2022 3 13 https://doi.org/10.4271/03-15-01-0001
- Nguyen , V. , Zhang , J. , Jiao , R. et al. Effects of Crankpin Bearing Speed and Dimension on Engine Power Journal of Southeast University 37 2021 119 127 https://doi.org/10.3969/j.issn.10037985.2021.02.001
- Van , L. , Jian , R. , and Huang , D. Influence of Micro Asperity Contact and Radial Clearance on the Tribological Properties of Crankpin Bearings Journal of Southeast University 37 2021 264 271 https://doi.org/10.3969/j.issn.10037985.2021.03.005
- Xu , X. , Liem , N. , Wang , X. , and Zhou , H. Sensitivity Analysis of the Geometrical Dimensions of the Crankpin Bearing on the Tribological Property of an Engine SAE Int. J. Engines 15 3 2021 1 12 https://doi.org/10.4271/03-15-03-0018
- Martan , J. , Moskal , D. , Smeták , L. , and Honner , M. Performance and Accuracy of the Shifted Laser Surface Texturing Method Micromachines 11 2020 520 https://doi.org/10.3390/mi11050520
- Zhao , B. , Dai , X. , Zhang , Z. et al. A New Numerical Method for Piston Dynamics and Lubrication Analysis Tribology International 94 2016 395 408 https://doi.org/10.2016/j.triboint.2015.09.037
- Van , L. , Wu , Z. , Le , V. et al. Optimization of Crankpin Bearing Lubrication under Dynamic Loading Considering Effect of Micro Asperity Contact Industrial Lubrication and Tribology 72 2020 1173 1179 https://doi.org/10.1108/ilt-02-2020-0072
- Zhang , H. , Zhang , P. , and Meng , H. Boundary Slip Surface Design for High Speed Water Lubricated Tribology International 79 2014 32 14 https://doi.org/10.1016/j.triboint.2014.05.022
- Patir , N. and Cheng , H. Application of Average Flow Model to Lubrication between Rough Sliding Surfaces Journal of Lubrication Technology 101 1979 220 229 https://doi.org/10.1115/1.3453329
- Van , L. , Zhang , J. , and Jiao , R. Method of Ameliorating the Lubrication and Friction Performance of an Engine Based on Different Microtextures Journal of Southeast University 37 2021 1 7 https://doi.org/10.3969/j.issn.10037985.2021.04.001
- Babu , P. , Syed , I. , and Beera , S. Experimental and Numerical Studies of Positive Texture Effect on Friction Reduction of Sliding Contact under Mixed Lubrication Proc IMechE, Part J: J Engineering Tribology 235 2020 360 375 https://doi.org/10.1177/1350650120930911
- Rosenkranz , A. , Grützmacher , P. , Gachot , C. et al. A Critical Discussion for Rolling and Sliding Contacts Adv Eng Mater 2019 2019 1 20 https://doi.org/10.1002/adem.201900194
- Fesanghary , M. and Khonsari , M. Topological and Shape Optimization of Thrust Bearings for Enhanced Load-Carrying Capacity Tribol Int 53 2012 12 21 https://doi.org/10.1016/j.triboint.2012.03.018
- Zabala , B. , Igartua , A. , Fernández , X. et al. Friction and Wear of a Piston Ring/Cylinder Liner at the Top Dead Centre: Experimental Study and Modelling Tribol. Int. 106 2017 23 33 https://doi.org/10.1016/j.triboint.2016.10.005
- Vokac , A. and Tian , T. An Experimental Study of Oil Transport on the Piston Third Land and the Effects of Piston and Ring Designs SAE Technical Paper 2004-01-1934 2004 https://doi.org/10.4271/2004-01-1934